Rehabmart Solid-Point PLCM 1 Guide

ISSUED:08-20-02 SHEET #: 200-9404-9 03-21-07
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
1 of 5
Read instruction sheet before you start installation and assembly.
Model:PLCM 1,
PLCM UNL
Installation and Assembly -Solid•Point™Flat Panel
Straight Column Mount
R
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.
• Installer must verify that the ceiling will safely support
thecombinedweightof allattached equipmentand
hardware.
WARNING
Note: Installation for 32" - 60" LCD and Flat Panel Screens for model PLCM-UNL
Note: Installation for 32" - 71" LCD and Flat Panel Screens for model PLCM-1
Model Max. Load Screen Size Range
PLCM-UNL 200 lb. (90.7 kg.) 32'' - 60''
PLCM-1 225 lb. (102.3 kg.) 32'' - 71''
PLCM 1 PLCM UNL

ISSUED:08-20-02 SHEET #: 200-9404-9 03-21-07
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
2 of 5
D
F
A
B
Note: Some parts may not appear exactly as illustrated.
HI
C
E
G
J
Fasteners
Description Qty Part #
Aceiling arm box 1 201-1062
Btilt bracket 1 200-1552
C33" support pipe 1 139-1088
Dretaining collar 1 1800-375
EM5 x .8 x 10 mm penta-pin™ screw 4 505-9010
F2.875 OD x 2.125 ID x .062 H fiber washer 1 540-9432
GM10 x 1.5 x 15 mm penta-pin screw 8 520-9263
HM10 x 2" penta-pin tool 1 520-9260
IM5 x 1" penta-pin tool 1 520-9249
JM5 x .8 x 8 mm phillips Type F screw 4 520-1167
PARTS LIST
Before you begin, make sure all parts shown are included with your product.

ISSUED:08-20-02 SHEET #: 200-9404-9 03-21-07
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
3 of 5
ceilingplate (not included)
Threadsupport pipe(C)intothreadedfittinginceiling plate(ULListed CMJ470,notincluded).Tighten -fouror
five complete turns - leaving slot aligned with one small hole in the side of the ceiling plate threaded fitting. Insert
and tighten one M5 x .8 x 10 mm penta-pin screw (E) provided with ceiling plate as shown. Use the M5 penta-pin
tool (I) to tighten screw. BY HAND, insert four M10 x 1.5 x 15 mm penta-pin screws (G) into threaded holes in the
sidesofceiling armbox (A).Leaveapproximately 1/4"of exposedthread. Slide ceilingarm box(A)and fiber
washer(F) ontoendofsupportpipe(C).Thread retainingcollar (D)ontothreadedendofsupport pipe(C). Tighten -
four or five complete turns. Slide ceiling arm box (A) down so that it is on top of retaining collar (D). Insert and
tighten one M5 x .8 x 10 mm penta-pin screw (E) into retaining collar (D) as shown. Insert one M5 penta-pin screw
(E) through the tab on the back of ceiling arm box (A). Use M5 penta-pin tool (I) to tighten screw just enough to
stabilizesupport pipe(C).
Note: UL Listed ADJ or EXT extension column series can be used in combination with, or in place of support
pipe(C)toachievedifferentlengths.
E
D
C
C
A
F
D
G
1/4”
G
E
BACKOF CEILING
ARMBOX
E

ISSUED:08-20-02 SHEET #: 200-9404-9 03-21-07
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
4 of 5
Hang tilt bracket (B) onto ceiling arm box (A).
Adjust tilt as desired and tighten four M10 x 1.5 x
15 mm penta-pin screws (G) securely using M10
penta-pintool (H).
B
A
G
For LCD screen adapter bracket, skip to step 2 on page 5.
Attach tilt bracket (B) to adapter plate using four M10 x 15 mm penta-pin screws (G) in accordance with
appropriatedrawing below.TightenusingM10 penta-pintool (H).
B
Note: Referto adapterplateinstruction sheet(sold separatelyfor modelPLCM 1,not evaluatedby UL)forattachment of
adapterplate toplasma beforeproceeding withstep2.
LANDSCAPE
LANDSCAPE
PORTRAIT
(Not to be used with UNL models)
LANDSCAPE
B
A
G
BG
ADAPTERPLATE ADAPTERPLATE
PLASMASCREEN PLASMASCREEN
Note: Screenand adapter
platemay appeardifferent
thanillustrated.
• For a safe assembly be sure to fully tighten four
screws(G).
WARNING
PORTRAIT
(Not to be used with UNL models)
• Donot mountPLCM-1 inportrait orientation.Mounting
PLCM-1in portrait orientationmay resultin product
failure.
WARNING
G

ISSUED:08-20-02 SHEET #: 200-9404-9 03-21-07
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
5 of 5
Hang tilt bracket (B) onto ceiling arm box (A).Adjust tilt as desired and tighten four
M10 x 1.5 x 15 mm penta-pin screws (G) securely using M10 penta-pin tool (H).
BA
G
©2004PeerlessIndustries,Inc. Allrightsreserved.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
Solid•PointisatrademarkofPeerlessIndustries,Inc.
Allotherbrand and product names are trademarks or registeredtrademarks oftheirrespectiveowners.
• For a safe assembly be sure to fully tighten four
screws(G).
WARNING
Note:Screen andadapter
platemay appeardifferent
thanillustrated.
Note: Referto adapter bracketinstruction sheet(sold separately,notevaluated byUL) forattachmentof adapterbracket to
LCDscreen beforeproceeding withstep 2.
Attach tilt bracket (B) to adapter bracket using four M5 x 8 mm phillips screws (J).
Note: Do not use M5 x 6 mm screws that are included with the adapter bracket
J
ADAPTERBRACKET
LCDSCREEN
B