PROAIM SBP-02 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
VCT Base Plate w Magnec Shoulder
Mount SBP-02 (P-SBP-02)
Assembly Manua l
2 x 15mm & 12” Long 300mm Female Rods
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Base Plate 2 x 15mm & 8” Long 200mm Female Rods

2
VCT Base Plate Setup
Loosen the knob on the other side of the base
plate and insert the 300mm long rod.
Now insert the second 200mm long rod &
ghten it properly with the knob as shown in
the image.
Open the shoulder pad, as shown in the
image.
NOTE: It has a magnet mount system that
allows easy access to the camera screws just by
ipping the camera base plate.
Loosen the knob of the base plate and insert
the 200mm long rod into it.
Insert the second 300mm long rod and ghten
the knob properly, as shown in the image.
NOTE: There are 15mm(dia) rods on the front
and back to accommodate more camera
accessories.

3
Camera Setup
Mount the camera (Not-Included) on the
shoulder pad and ghten it properly with the
help of a screwdriver.
NOTE: It has a 3.5" long slot that allows quick
posioning of your camera & accessories to
evenly distribute the weight of your camera.
NOTE: VCT base plate also supports RED
(DSMC2), Arri (Amira and Alexa Mini), Sony
(Venice, FS7, FS7M2, F5, F55, EX1, EX3), Canon
(C200, C300, C300M2, C700), Panasonic (EVA1,
Cinema Varicam LT 4k S35), Blackmagic (Ursa
Mini), and many other camera models with
in-terchangeable lenses.
Now insert the camera bolt into the shoulder
pad with the help of a screwdriver.
NOTE: The shoulder plate has 1/4"-20 and 3/8"-
16 threaded holes for storing addional screws.
YOUR PROAIM VCT BASE PLATE W MAGNETIC SHOULDER MOUNT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)

4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our ut-
most support and care unl you use our product.