Rehabmart WSP 450 User manual

ISSUED: 02-10-00 SHEET #: 024-9003-5 08-04-05
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
1 of 3
Assembly Instructions - External Wall Plate
IMPORTANT! Read entire instruction sheet
before you start installation and assembly. MAXIMUM LOAD CAPACITY:
175 lb (79 kg)
*
Models
WSP 450, WSP 450S, WSP 450W,
WSP 460, WSP 460S,
WSP 470, WSP 470S, WSP 470W
WSP 450, WSP 450S, and WSP 450W for studs on 16" (406
mm) centers, contains two electrical box knockouts.
WSP 460 and WSP 460S for studs on 20" (508 mm) centers,
contains two electrical box knockouts.
WSP 470, WSP 470S, and WSP 470W for studs on 24" (610
mm) centers, contains two electrical box knockouts.
*Refers to maximum weight of TV or max. combined weight of TV, VCR
and VCR Bracket.
A
Knockouts
B
C
D
E
THISENDUP THISENDUP
*Note: The mounting hole which
is closest to the lip of the plate
indicates the up position.
*
Note: Wall plate may
appear slightly different
than illustrated.
• Wall or mounting structure must be capable of sup-
porting a minimum static load of 600 lb (272 kg).
WARNING
WSP 450S WSP 460S WSP 470S
MODEL # PARTS LIST
PART # QTY. DESCRIPTION
A024-4014 1 wall plate 16" centers (silver)
024-4015 wall plate 20" centers (silver)
024-4016 wall plate 24" centers (silver)
B520-9511 8 1/4-20 x 1/2" phillips screw
C520-9522 12 1/4-20 x 2 1/2" phillips screw
D590-1093 12 toggler
E540-9444 8 washer
!
!
!
!
!
WSP 450 WSP 460 WSP 470
MODEL # PARTS LIST
PART # QTY. DESCRIPTION
A024-1014 1 wall plate 16" centers (black)
024-1015 wall plate 20" centers (black)
024-1016 wall plate 24" centers (black)
B510-9108 8 1/4-20 x 1/2" phillips screw
C520-9521 12 1/4-20 x 2 1/2" phillips screw
D590-1093 12 toggler
E540-9440 8 washer
!
!
!
!
!
!
!
!
!
!
PARTS LIST
WSP 450W WSP 470W
PART # QTY. DESCRIPTION
A024-2014 1 wall plate 16" centers (white)
024-2016 wall plate 24" centers (white)
B520-9511 8 1/4-20 x 1/2" phillips screw
C520-9522 12 1/4-20 x 2 1/2" phillips screw
D590-1093 12 toggler
E540-9444 8 washer
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
MODEL #

ISSUED: 02-10-00 SHEET #: 024-9003-5 08-04-05
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
2 of 3
Use a stud finder to locate
stud centers. Use wall plate (A) as a template to
mark slot centers on stud centers.
A
Note: See below for proper holes to attach mount to wall plate.
PLA-1 PLA-2
ALLOTHERMOUNTS

ISSUED: 02-10-00 SHEET #: 024-9003-5 08-04-05
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
3 of 3
E
Fasten all twelve screws (C) tight,
untill wall plate (A) is flush with wall.
Pushtoggler (D) through hole. Pull screw (C)
back untill toggler (D) hits the inside of the
metal stud.
Placescrew (C) through
wall plate (A).Partially
fastenthe toggler(D) to
the back of the screw.
Pivotendsof toggler (D)
90°.
∅ 3/4"
(19 mm)
Drill 3/4" (19 mm) dia. holes
throughdrywall and studs.
Inserttogglers (D)as shown
below...
Eight 1/4-20 x 1/2" phillips
screws(B)andeight washers
(E)areprovidedtoattach
mount(sold separately)to
wallplate.
A
D
C
A
A
C
D
A
CD
©2005PeerlessIndustries,Inc. Allrightsreserved.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
• Make sure that mounting screws are anchored into the
center of the studs. The use of an "edge to edge" stud
finderishighly recommended.
WARNING
ALLOTHERMOUNTS
PLA-1 PLA-2
Note:See below for quantity of fasteners and proper holes to attach wall plate to wall.