Relens TLS 30120 User manual

HDBaseT Übertragungssystem
Art.: 30120
VER 1.0 Subject to amendmends

Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this manual
for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Table of Contents
1. Introduction. .......................................................................................... 1
2. Features.................................................................................................. 1
3. Package Contents................................................................................ 2
4. Specifications. ....................................................................................... 2
5. Operation Controls and Functions. ..................................................... 4
5.1 Transmitter Panel............................................................................. 4
5.2 Receiver Panel. ............................................................................... 5
5.3 IR Pin Definition. ............................................................................... 6
6. Application Example............................................................................ 8

1 / 8
1. Introduction
This 18Gbps HDMI Extender can extend high definition video / audio signal,
RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters between
transmitter and receiver via a single CAT cable. It supports resolution up to
4K2K@60Hz 4:4:4, 18Gbps and HDCP 2.2. One HDMI loop port is available
for output. It also supports de-embeded audio for L/R audio output and PoC
function. In addition, the extender is equipped with two-way IR pass-through
which allows for source and display control.
This HDMI extender includes two units: transmitter unit and receiver unit. The
transmitter unit is responsible for capturing HDMI input signal and carrying
the signal via one cost effective Cat5e/6 cable, and transmitting / emitting IR
control signals. The receiver unit is responsible for receiving the HDMI signal
and transmitting / emitting IR control signal.
The extender offers the most convenient solution for HDMI extension via a
single Cat5e/6 with long distance capability, and is the perfect solution for
any application.
2. Features
☆HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
☆Support 18Gbps video bandwidth
☆The maximum extended transmission distance via a single Cat5e/6 cable:
394ft / 120 meters for 4K2K signal;
492ft / 150 meters for 1080P signal
☆Support one HDMI loop output on the transmitter
☆De-embeded audio to analog stereo output on receiver
☆With bi-directional IR, RS-232 and CEC pass-through
☆HDR, HDR10+, Dolby Vision and HLG function supported
☆Support PoC (Power over Cable)function
☆Compact design for easy and flexible installation

2 / 8
3. Package Contents
Qty Item
118Gbps HDMI over HDBaseT Extender (Transmitter)
118Gbps HDMI over HDBaseT Extender (Receiver)
1IR Blaster cable (1.5 meters)
120~60KHz IR Receiver cable (1.5 meters)
4Mounting Ear
23-pin Phoenix connector
124V/1A Locking Power adapter
1User Manual
4. Specifications
Technical
HDCP Compliance HDCP 2.2 / HDCP 1.4
Video Bandwidth 18Gbps
Video Resolution
4K2K 50/60Hz 4:4:4
4K2K 50/60Hz 4:2:2
4K2K 50/60Hz 4:2:0
4K2K 30Hz 4:4:4
1080p, 1080i, 720p, 720i, 480p, 480i
All HDMI 3D TV formats
All PC resolutions including 1920 x 1200
Color Space RGB / YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth
8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz YCbCr
4:2:2/4:2:0)
8-bit (4K60Hz 4:4:4 )
HDMI Audio Formats
LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby
TrueHD, Dolby Digital Plus(DD+), DTS-ES, DTS
HD Master, DTS HD-HRA, DTS-X
L/R Audio Formats PCM 2.0
ESD Protection Human body model — ±8kV (Air-gap discharge) &
±4kV (Contact discharge)

3 / 8
Connection
Transmitter
Inputs: 1x HDMI Type A [19-pin female]
Outputs: 1x HDMI Type A [19-pin female]
1x HDBT OUT [RJ45, 8-pin female]
Control: 1x IR IN [3.5mm Stereo Mini-jack]
1x IR OUT [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
1x SERVICE [Mini-USB, Update port]
Receiver
Inputs: 1x HDBT IN [RJ45, 8-pin female]
Outputs: 1x HDMI Type A [19-pin female]
1x AUDIO OUT [3.5mm Stereo Mini-jack]
Control: 1x IR IN [3.5mm Stereo Mini-jack]
1x IR OUT [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
1x SERVICE [Mini-USB, Update port]
Mechanical
Housing Metal Enclosure
Color Black
Dimensions Transmitter / Receiver:
140mm [W] x 65mm [D] x 18mm [H]
Weight Transmitter: 160g, Receiver: 155g
Power Supply Input: AC 100 - 240V 50/60Hz
Output: DC 24V/1A (Locking connector)
Power Consumption 9.36 W
Operating
Temperature 32 - 104°F / 0 - 40°C
Storage Temperature -4 - 140°F / -20 - 60°C
Relative Humidity 20 - 90% RH (no condensation)
Resolution / Distance
4K2K 394ft / 120M
1080P 492ft / 150M
Resolution /
Cable Length
4K60 -
Feet / Meters
4K30 -
Feet / Meters
1080P60 -
Feet / Meters
HDMI IN / OUT 16ft / 5M 32ft / 10M 50ft / 15M
The use of “Premium High Speed HDMI” cable is highly recommended.

5. Ope
r
5.1 Trans
m
No.
N
1Po
w
2SE
R
3DC
2
4HD
B
5Con
Sig
n
Indi
c
6Dat
a
Indi
c
7HD
M
8HD
M
9IR I
N
10 IR
O
DC 24V
1
3
5 4
r
ation Con
t
m
itter Panel
N
ame
w
er LED Red L
E
R
VICE port Firmw
a
2
4V
DC 24
Note th
transm
i
other o
n
B
T OUT RJ45
c
with a
nection
n
al
c
ator lamp
▪Illum
conne
c
▪Flas
h
statu
s
▪Dark
a
Signal
c
ator lamp
▪Illum
▪Flas
h
▪Dark
M
I OUT HDMI
M
I IN HDMI
N
IR inp
u
O
UT IR out
p
is fro
m
4 / 8
HDMI OUT
7
t
rols and F
u
Fun
c
E
D indicates that
a
re update port.
V/1A power supp
at the extender sup
p
i
tter or receiver is
p
o
w
n
e doesn’t need po
w
c
onnector for con
n
CAT 5e/6 cable.
inating: Transmitt
e
c
tion status.
h
ing: Transmitter
a
s
.
: Transmitter and
inating: HDMI sig
n
h
ing: HDMI signal
: No HDMI signal.
loop output for di
s
source input.
u
t port for receivi
n
p
u
t
port for control
m
the IR IN port of
re
HDBT OUT
HDMI IN
IR IN IR
O
8 9
u
nctions
c
tion Descriptio
n
the transmitter is
ly input port.
p
orts PoC function, i
t
w
ered on by 24V/1A
p
w
er supply.
n
ecting the HDB
T
er
and Receiver a
r
a
nd Receiver are
Receiver are not
c
n
al with HDCP.
without HDCP.
s
play.
n
g the signal of IR
of source device.
T
re
ceiver.
SERVICE
2
O
UT
10 11
n
powered on.
t
means that either
p
ower adapter, the
T
IN port of receiv
e
r
e in good
in poorconnectio
n
c
onnected.
remote.
T
his IR output sign
e
r
n
al
6
RS232 TX/TX

11 RS-
2
5.2 Recei
v
No.
N
1Po
w
2SE
R
3DC
2
4HD
B
5
Con
Sig
n
Indi
c
6Dat
a
Indi
c
7HD
M
8
A
U
D
DC 24V
1
3
5
4
2
32
3-pin
P
The R
S
receiv
e
v
er Panel
N
ame
w
er LED Red L
E
R
VICE port Firmw
a
2
4V
DC 24
V
Note th
a
transmi
t
other o
n
B
T IN RJ45
c
trans
m
nection
n
al
c
ator lamp
▪Illum
i
conne
c
▪Flas
h
statu
s
▪Dark
:
a
Signal
c
ato
r
▪Illum
i
▪Flas
h
▪Dark
:
M
I OUT HDMI
o
D
IO OUT 3.5m
m
5 / 8
HDMI OUT
7
P
hoenix connecto
S
-232 command
w
e
r or from receive
Func
t
E
D indicates that
t
a
re update port.
V
/1A power supp
l
a
t the extender sup
p
t
ter or receiver is
p
o
w
n
e doesn’t need po
w
c
onnector for con
n
m
itter with a CAT
5
i
nating: Transmitt
e
c
tion status.
h
ing: Transmitter
a
s
.
:
Transmitter and
i
nating: HDMI sig
n
h
ing: HDMI signal
:
No HDMI signal.
o
utput for display
.
m
stereo connecto
r
HDBT IN
A
UDIO OUT IR IN IR O
U
8 9
r for RS-232 com
m
w
ill pass-through
f
r to transmitter.
t
ion Description
t
he receiver is po
w
l
y input port.
p
orts PoC function, it
w
ered on by 24V/1A
p
w
er supply.
n
ecting the HDBT
5
e/6 cable.
er
and Receiver ar
e
a
nd Receiver are
Receiver are not
c
n
al with HDCP.
without HDCP.
.
r
for analog audio
SERVICE
2
U
T
10 11
m
and transmissi
o
f
rom transmitter t
o
w
ered on.
means that either
p
ower adapter, the
OUT port of
e
in good
in poorconnectio
n
c
onnected.
output.
o
n.
o
n
RS232 RX/TX
4 6

9IR I
N
10 IR
O
11 RS-
2
N
IR inpu
t
O
UT IR outp
u
is from
t
2
32
3-pin P
h
The RS
receive
r
6 / 8
t
port for receivin
g
u
t port for control
o
t
he IR IN port of tr
a
h
oenix connector
f
-232 command w
r
or from receiver
g
the signal of IR
r
o
f display device.
T
a
nsmitter.
f
or RS-232 com
m
ill pass-through fr
to transmitter.
emote.
T
his IR output sign
a
m
and transmission
om transmitter to
a
l
.

7 / 8
The following is IR system diagram about IR cable use method.
TV
Note: When the angle between the IR receiver and the remote control is ± 45 °, the
transmission distance is 0-5 meters; when the angle between the IR receiver and the
remote control is ± 90 °, the transmission distance is 0-8 meters.
TV remote DVD remote
IR Receiver cable
CAT 5e/6 cable
HDMI OUT AUDIO OUT IR IN IR OUT
Transmitter Receiver
IR Blaster cable
DVD
HDMI OUT HDMI IN IR IN IR OUT
DC 24V
HDBT OUT
DC 24V
HDBT IN

6. Appl
i
Tran
s
Power
CA
T
Rece
i
DC 24V
DC 24V
i
cation Ex
a
DVD or Blu-ray
P
s
mitter
LAN
Supply
T
5e/6 cable
i
ver
UHDTV
HDBT IN
HDBT OUT
8 / 8
HDMI OUT
a
mple
P
layer
HDMI OUT HDMI IN
UHDTV
AUDIO O
U
LAN USB US
B
IR IN IR OUT
U
T IR IN IR OUT
2.0 Speakers
RX
B
RS-232 DC 12V
Controller
IR Blaster
IR Receiver
IR Receiver
IR Blaster
RS232 RX/TX