SMART-AVI DPX-1P-PLUS User manual

DisplayPort, USB K/M, RS232
and Audio over CAT5e/6
Extender
EXTEND DP VIDEO,
USB KEYBOARD AND MOUSE,
AUDIO, AND RS232
UP TO 328 FEET (100M) OVER
CAT5/5E/6 CABLE
Quick Start Guide
VIDEO
Format DisplayPort 1.2
Maximum Pixel Clock 275 MHz
Input Interface (TX) (1) DP female
Output Interface (RX) (1) DP female
Resolution Up to 4K (3840x2160 @ 30Hz)
DDC via AUX
Equalization Automatic
Input Cable Length Up to 15 ft.
Output Cable Length Up to 15 ft.
AUDIO
Frequency Response 30KHz to 80KHz
Input Interface (TX) (1) 3.5 mm (Female)
Output Interface (RX) (1) 3.5 mm (Female)
USB
Signal Type USB 1.1 and USB 2.0 Compatible
Input Interface (TX) (1) USB Type B (Female)
Output Interface (RX) (2) USB Type A (Female)
RS-232
Input Interface (TX) DB9 (Female)
Output Interface (RX) DB9 (Female)
Flow Control Software up to 115,000 Kbps
OTHER
Power External 100-240 VAC/5VDC4A
@20W
Dimensions 9 in W x 2 in H x 3 in D
Weight 1.45 lb per TX/RX unit
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95%
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
800.AVI.2131, 702.800.0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com
TECHNICAL SPECIFICATION
DPX-1P-PLUS
WHAT’S IN THE BOX
PART NO. Q-TY DESCRIPTION
DPX-1P-PLUS-TX 1 DP, USB, RS232 and Audio
over CAT5e/6 Transmitter
DPX-1P-PLUS-RX 1 DP, USB, RS232 and Audio
over CAT5e/6 Receiver
PS5VD3A-WMT 2 PS5VD4A Power Supply
Quick Start Guide 1

ABOUT DPX-1P-PLUS
The DPX-1P-Plus DisplayPort extender is capable of sending
a DP signal up to 328 feet (100m) over a conventional and
inexpensive CAT5/5e/6 cable. The technology is superior
to standard extenders that require a special CAT6 shielded
cable to go a short distance. The DPX-1P-Plus also has USB
keyboard and mouse, audio, and RS-232 extension, giving
users the ability to control displays or devices remotely.
FEATURES
• Extend DisplayPort signals up to 328 feet (100 m)
• Data recovery for digital video
• Supports 1080p (1920 x 1200 @ 60 Hz)
• Supports up to 4K (3840 x 2160 @ 30 Hz) video
resoluon
• Automac EDID Learning
• USB Keyboard and Mouse
• Supports RS-232 extension
• External power adapter for transmier and
receiver unit
• Supports SST only (no MST support)
• Plug-and-play ready
1. Power off all devices.
2. Connect a DisplayPort source (computer) to the DisplayPort port on the DPX-1P-Plus-TX.
3. Connect a USB source (computer) to the USB port on the DPX-1P-Plus-TX using a USB A to B cable (not included).
4. Optionally connect RS-232 for control functions.
5. Connect the DPX-1P-Plus-TX to the DPX-1P-Plus-RX with one CAT5 UTP (Unsheilded Twisted Pair) cable.
6. Connect a DisplayPort compatible display to the DisplayPort port on the rear of the DPX-1P-Plus-RX.
7. Connect USB keyboard and mouse to the USB ports on the DPX-1P-Plus-RX.
8. Optionally connect RS-232 for control functions.
9. Connect the power to the DPX-1P-Plus-RX and the DPX-1P-Plus-TX.
10. Power on the display and then the computer.
NOTE: The DDC of your display will be learned automatically.
DPX-1P-PLUS-TX FRONT
DPX-1P-PLUS-TX BACK
DPX-1P-PLUS-RX BACK
DPX-1P-PLUS-RX FRONT
HARDWARE INSTALLATION
DP IN
DP OUT
USB IN
USB OUT
AUDIO IN
AUDIO OUT
CAT5/6
5V AUDIO
IN
www.smartavi.com MADE IN USA
USB IN
328 ft
DPX-1P-PLUS-TX
DP IN
LINK 5V AUDIO
IN
KEYBOARD MOUSE
RS-232
www.smartavi.com MADE IN USA
DPX-1P-PLUS-RX
DP IN
LINK