Rellorus OB22-001A User manual

Manufacturer: Shenzhen Yilan Network Technology Co., Ltd.
Address: A905, Bldg. 9, Jindi Kaixuan Plaza, 31 Longcheng Ave.,
Longgang St., Longgang, Shenzhen, CHINA 518000
Service Email: [e-mail]
https://www.homyeko.com
5012640
Made in China
Heated Throw Blanket
Model: OB22-001A
USER GUIDE

01
03
03
04
04
05
06
08
10
10
CONTENTS
Safety Instructions
Features
Specifications
Controller Diagram
Package Contents
How to Use
Cleaning & Maintenance
Troubleshooting
Warranty & Support
Statement

01 02
01. READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT.
02. THE PRODUCT IS DESIGNED ONLY TO WARM UP THE HUMAN BODY.
03. DO NOT USE ON PETS.
04. DO NOT USE ON PEOPLE INSENSITIVE TO HEAT OR VULNERABLE PEOPLE UNABLE
TO REACT TO OVER-HEATING.
05. THIS PRODUCT SHOULD NOT BE USED ON VERY YOUNG CHILDREN (0-3 YEARS OLD).
06. THIS PRODUCT CAN BE USED BY YOUNG CHILDREN (3-8 YEARS OLD) ONLY IF THE
CONTROLLER HAS BEEN SET BY AN ADULT RESPONSIBLE TO THEIR SAFETY AND IF
THEY HAVE BEEN GIVEN ADEQUATE INSTRUCTIONS ON HOW TO USE IT SAFELY.
07. THIS PRODUCT CAN BE USED BY CHILDREN OVER THE AGE OF 8, PEOPLE WITH
REDUCED PHYSICAL, SENSORY OR MENTAL SKILLS AND PEOPLE LACKING EXPERI-
ENCE OR KNOWLEDGE IF THEY ARE SUPERVISED AND HAVE BEEN INSTRUCTED ON
HOW TO USE IT SAFELY, FULLY AWARE OF THE CONSEQUENT RISKS OF USE.
08. CHILDREN SHOULD NOT PLAY WITH THE PRODUCT.
09. CLEANING AND MAINTENANCE MUST NOT BE PERFORMED BY CHILDREN UNLESS
SUPERVISED.
10. THE PRODUCT IS NOT DESIGNED FOR MEDICAL USE IN HOSPITALS.
11. DO NOT PUNCTURE; DO NOT FASTEN IN PLACE USING PINS OR OTHER METALLIC
MEANS.
12. DO NOT USE WHEN FOLDED OR BUNCHED UP.
13. DO NOT USE IF WET.
14. THE PRODUCT SHOULD ONLY BE USED IN CONJUNCTION WITH THE SPECIFIED
CONTROLLER.
15. THE ELECTRICAL AND MAGNETIC FIELDS EMITTED BY THE PRODUCT MAY INTERFERE
WITH THE FUNCTIONS OF MEDICAL DEVICES LIKE A PACEMAKER. PLEASE CONSULT
YOUR DOCTOR BEFORE USE IF YOU ARE EQUIPPED WITH A MEDICAL DEVICE.
16. DO NOT PULL, TWIST OR MAKE SHARP BENDS ON THE CORDS.
17. PLEASE CHECK THE PRODUCT FREQUENTLY FOR SIGNS OF DAMAGE OR WEAR AND
TEAR. IF SUCH SIGNS ARE EVIDENT, IF THE PRODUCT HAS BEEN USED INCORRECTLY
OR IF IT NO LONGER HEATS UP, IT MUST BE CHECKED BY THE MANUFACTURER
BEFORE BEING SWITCHED ON AGAIN. THERE ARE NO USER SERVICEABLE PARTS.
18. IF THE MAINS CONNECTION CORD IS DAMAGED, IT MUST BE DISPOSED OF; IF THE
CORD CANNOT BE REMOVED FROM THE PRODUCT, THE PRODUCT SHOULD BE
DISPOSED OF ALONG WITH THE CORD.
19. THE ELECTRONIC COMPONENTS IN THE CONTROLLER WOULD WARM UP WHEN THE
PRODUCT IS IN USE. FOR THIS REASON, THE CONTROLLER MUST NEVER BE
COVERED WHILE IN USE.
20. DO NOT USE IN AN ATMOSPHERE WITH OVERLY ABUNDANT OXYGEN.
21. UNPLUG WHEN NOT IN USE AND NEVER LEAVE UNATTENDED WHILE USING,
ESPECIALLY WHILE CHILDREN ARE PRESENT.
22. NEVER PULL BY THE CORD OR USE THE CORD AS A HANDLE; DO NOT PINCH THE
CORD.
23. USE THE PRODUCT ONLY AT RATED VOLTAGE AS MARKED ON THE PRODUCT. IT’S
RECOMMENDED NOT TO USE WITH GENERATORS AND POWER CONVERTERS.
24. DO NOT USE WITH LINIMENT, SALVE OR OINTMENT PREPARATIONS.
25. IF THE PRODUCT IS PROVIDED WITH MAGNETIC CLOSURE, DO NOT USE IF YOU HAVE
A PACEMAKER OR OTHER MEDICAL DEVICES SENSITIVE TO MAGNETS.
DANGER: TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE AND
PERSONAL INJURY, THIS PRODUCT MUST BE USED IN ACCORDANCE
WITH THE FOLLOWING INSTRUCTIONS:
HOUSEHOLD USE ONLY
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Read all the instructions.
Do not puncture.
Do not use if folded or
creased.
Not suitable for very young
children (0-3 years).
Dispose of the packing in
an eco-friendly manner.
WARNING: Warning of risks of injury or health hazards.
CAUTION: Safety information about possible damage to appliance
/ accessories.
Symbol Explanation
Gentle wash cycle in
water at 30°C
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean.

03 04
Full body size (50 inches x 60 inches)
Made of luxurious soness of flannel facing
10 adjustable heating levels
6.56  length detachable power cord
1-4hr Timer
Overheating protection
Feature Controller Diagram
1 x Rellorus Heated throw blanket
1 x Hand-held controller
1 x User Guide
(Note: Please check first to make sure the product is complete without any damage.
If you have any doubt, please do not use and contact us.)
Package Contents
Model
Name
Input voltage
Rated power consumption
Heating level
Auto-off timing settings (hour)
Product dimensions
Materials
OB22-001A
Heated Throw Blanket
120V ~ 60Hz
120W
10 levels (1,2,3,4,5,6,7,8,9,H)
4 settings (1,2,3,4)
50 inches x 60 inches / 127 cm * 153 cm
Flannel
Specifications
LED screen display
Timer button
Temperature button
Power button

When the set timer is run out, the product will stop heating automatically, the control-
ler display will flash “0” in timer settings and the temperature will not be displayed. If
you wish to use again, press the “ ” button, the temperature, and timer setting will
be the same as the latest use.
05 06
WARNING: This product is equipped with a SAFETY SYSTEM. This sensor technology
prevents the blanket surface from getting overheated entirely and would automat-
ically switch off it when there is a malfunction. Please note that for safety, the
product could not be operated any longer aer the malfunction. If the overheat
protection is activated, please contact us.
1. Before cleaning, always remove the mains plug from the outlet first.
2. Then disconnect the controller from the product.
1. Soak the product for 15 minutes first in mild soap and cool water.
2. Machine wash on gentle cycle in water at 30℃for 2 minutes or hand wash.
3. Rinse with fresh, cool water.
4. Machine dry on gentle, cool cycle or hang to dry. (Immediately aer washing, reshape
the product to its original dimensions and spread it out flat on a clothes horse or
clothesline.)
Important! Do not insert the main plug inside the outlet unless connecting the control-
ler to the heated blanket. Align the coupler with the coupler connector first, then gently
push to lock position ( as shown in the below images).
Then connect the controller to the power supply.
Press the , the default H heating mode and 4 hr timers are active. Then "H" will be
displayed, which disappear aer 1 second, with red dot appearing on the LED screen.
Press the , the product was turned off. Only the red dot is still displayed, which
means the product is standby.
How to Use
Cleaning and Maintenance
1. On/Off
Cleaning
1. Store the product only aer it completely cools down and it’s completely dry.
2. Loop the cord loosely.
3. Store in an airy, dry environment.
Maintenance
Warning
When the product was turned on firstly, the default timer is 4 hr.
Press to set the working time mode among 1-2-3-4-1-2-3-4... circularly and the red
dot will be displayed during the timer setting. Your selection of time will be confirmed
aer the digit has flickered for 5 times on the screen.
If there is no timer setting aer pressing the , the timer setting mode will be quit
automatically aer the digit has flickered for 5 times on the screen.
3. Timer Adjustment
When the product is turned on, the heating level H (113 Fahrenheit) would be activated
by default.
Press the to choose the desired heating level among 10 different heating levels
( 77-113 Fahrenheit) .
Short press , you can choose the heating level step by step from 1-2-3-...8-9-H-1-2...
circularly.
Long press , you can got the H heating level directly from any heating level.
User Tips: The fastest way to preheat is to set the product at the highest heating level
aer turn it on.
2. Temperature Adjustment
4. Automatically OFF

If the product is not to be used for long, we recommend storing in the original package.
Make sure the plug is removed from the outlet and that the controller is disconnected
from the blanket before storing.
Warning: Make sure the blanket has cooled down before storing. During storage,
do not place any object on the product.
Problem: The product does not produce enough heat or does not work.
Cause: This heating products provide safe heat and protect consumers' skin within
temperature range based on international safety standards, which helps avoid low tempera-
ture burns. Therefore, the temperature setting is for keeping warm instead of getting hot.
Solution: CAUTION! The following troubleshooting test represents a non-standard use of
your product. Do not continue this test for more than thirty (30) minutes. Do not repeat this
procedure during actual use. Fold the product with at least four folds. Connect the controller
to the blanket, and then plug the controller into a working wall outlet. Set the controller to
the highest heat setting and wait for five (5) minutes. Place your hand inside the folds. If you
do feel warmth during this test, the product is working properly. Turn the controller OFF. Lay
the product out flat. It is safe to resume normal operation aer 20 minutes. If no heat is felt
during this test, unplug the power cord and contact Customer Support (support@rellorush-
ome.com).
Problem: When receiving the product, it does not work.
Solution: When receiving the product, please take it out from the packing and place it flat (do
not fold). Check the coupler and mains plug have been well connected, then switch on to
check whether the product works normally or not. For products unable to work normally,
please contact our customer service ([e-mail]).
Problem: The light fails to illuminate on the control unit
Solution: Check that the coupler is connected fully. Check the switch is attached and that the
instructions have been followed correctly; Check power supply is functional.
Problem: The product does not heat uniformly.
Cause: Maybe the product was folded or the heating wires are coiled during use.
Solution: Please place the blanket flat for using. The temperature of the body areas that
contact the heating zones is higher than the areas do not, which is a normal phenomenon.
Storing
For eco-friendly reason, the product should be separately disposed of instead of being
disposed of as unsorted municipal waste at the end of its service life. Please dispose of
properly at the local waste collection site.
Disposing
DO NOT submerge the controller in water. The controller must never contact water
or other liquids directly. To clean the controller, use a dry, lint-free cloth.
DO NOT dry clean as dry cleaning solvents may damage the wires.
DO NOT chemically clean (with bleach or cleaning fluids).
DO NOT use a wringer.
DO NOT use clothespins.
DO NOT iron and wring out.
DO NOT use mothballs or sprays of any kind.
DO NOT re-connect or use until COMPLETELY dry.
DO NOT wash the cord or put the cord into water.
Please note that frequent washing of the product has a negative effect.
DO NOT use commercial dryers or the dryers at your local laundromats, as they
would get too hot and can damage the wiring of the product.
Caution Troubleshooting
07 08

09 10
Problem: The product no longer works aer being used for a period of time.
Cause: The product is not operated or washed properly.
If the above suggestions could not solve the problems, this might result from the
permanent switch-off protection via the safety system. In this case, please contact
our customer service.
Solution: Please contact our customer service: [email protected]om
Problem: “E” or other symbols indicating improper operation appear when
using the product.
Cause: There is a problem with the controller.
Solution: 1. Please check whether the controller is tightly connected to the product. If not,
please disconnect the mains plug form the outlet, re-connect the controller and then connect
the mains plug back to the outlet.
2. If “E” still exists, please check whether the controller is covered and gets overly hot. If so,
please disconnect the mains plug from the outlet, wait until the controller cools down, connect
the mains plug back to the outlet, and then restart.
3. If “E” still exits, the overheat protection system might have been activated. Please contact
our customer service ([email protected]om).
Problem: The power cord or any wiring is damaged; Damage to the control unit; Fabric
rucking or creasing; Wear or tear on the fabric; Heat discoloration of fabric; The product
has been misused or accidentally damaged;
Solution: Discontinue use and contact customer support team at [e-mail]
Warranty & Customer support
This product is intended for domestic use only. Rellorus will repair or replace the
product, or any part of this product, (excluding batteries) free of charge if within 12
months of the date of purchase, it can be shown to have failed through defective
workmanship or materials. This guarantee covers working parts that affect the
function of the product. It does not cover cosmetic deterioration caused by fair wear
and tear or damage caused by accident or misuse. Rellorus shall not be responsible for
any type of incidental, consequential or special damages. Opening or taking apart the
product or its components will void the guarantee. Claims under guarantee must be
supported by proof of purchase and be returned carriage paid to Rellorus. Care should
be taken in packing the product so that it is not damaged while in transit. This
undertaking is in addition to a consumer's statutory rights and does not affect those
rights in any way.
For questions, support, or warranty claims, contact us at the email address below.
Please do include your Amazon order number and product model number.
Customer support: [e-mail]
https://www.homyeko.com
We can only provide aer-sale services for the products that are sold by authorized
sellers. If you have purchased from an unauthorized seller, please contact them
directly for service or warranty issues.
Statement

OB22-001A加热垫 说明书
尺寸：A5
材质：128g哑粉纸
单色印刷
装订方式：骑马订
2022.05.10 V1.0