Remington NE 3000 User manual

by, on, or near children or individuals with special needs or
certain disabilities.
■ Use this appliance only for its intended use as described
in this manual. Do not use attachments not recommended
by manufacturer.
■ Never drop or insert any object into any of the appliance's
openings.
■ Do not use outdoors or operate where aerosol (spray)
products are being used, or where oxygen is being
administered.
■ Always store the appliance in a moisture-free area. Do not
store it in temperatures exceeding 140°F (60°C).
■ Do not use this appliance with damaged or broken cutters,
as injury may occur.
■ Always remember to turn on the trimmer before you insert
it into your nose or ear to avoid painfully snagging hairs.
■Never insert the trimmer more than 1/4" (6mm) into your
nose or ear. Foreign objects should not come into contact
with your ear drum.
■ To prevent battery corrosion, the unit should be stored in a
dry environment.
■ Dead batteries should be removed immediately and disposed
of properly.
■ Do not use rechargeable batteries with this appliance.
The lower voltage in rechargeable batteries impairs the
performance of the cutting unit.
Changing the Attachment Heads (if applicable)
Some models have interchangeable attachments. You may
want to use the rotary head to trim nose hairs, the linear head
for ear and eyebrow hairs, and the linear for sideburns and
necklines.
To change heads:
1. Turn the trimmer off.
2. Detach cutting head by turning it counterclockwise to the
unlocked position and pulling it off.
3. Once the previous head is removed, attach the other head by
placing it on top of the unit and turning it clockwise to the
locked position.
Turning on your trimmer:
The on/off switch is integrated into the battery cap.
1. Rotate the battery cap clockwise to turn on.
2. To turn off, simply rotate the battery cap, counterclockwise,
back to the off position.
Use & Care
When using an electrical appliance, basic precautions should
always be observed, including the following:
Read all instRuctions befoRe
using this appliance.
WaRning
To reduce the risk of burns, fire, electric shock or injury
to persons:
■ This appliance is for household use only.
■ Close supervision is necessary when this appliance is used
Inserting the Battery
All Remington®Nose and Ear trimmers run on one "AA"
ALKALINE battery.
1. To open the battery compartment, turn the base of the unit
approximately 1/4 inch counterclockwise and pull it off.
2. Insert the battery into the unit, positive end first.
3. Replace the base and turn it 1/4 inch
clockwise to lock it into place.
Battery cautions
■ Use of non-alkaline batteries will impair the unit's operating
performance.
■ Battery should not be left in the unit if the unit is not in use
for long periods.
NE 3000 Series
iMpoRtant safetY
instRuctions
Use and Care Guide
Register Your New Product Today!
By registering your new Remington®product you will receive these important
benefits: Proof of ownership • Product protection • Product registration
• Special offers Register online at: www.RemingtonProducts.com

Performance Guarantee
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any
defects that are due to faulty material or workmanship for a
two-year period from the original date of consumer purchase.
This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty
period, we will replace it free of charge. Return your product
and sales receipt with your name, address and day time
phone number to: Remington Returns Center, 507 Stokely Dr.,
P.O. Box 1, Deforest, WI 53532. For more information call 800-
736-4648 in the U.S. or 800-268-0425 in Canada.
Warranty excludes:
■ Cutters
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE
FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the
following:
■ Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Any other conditions beyond our control
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR
ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT. ALL IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO TWO YEARS FROM DATE OF
ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state or province to
province. Some states do not allow the exclusion or limitation
of incidental, special or consequential damages.
Performance Guarantee
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington®
branded product you are not satisfied and would like a refund,
return it with the sales slip indicating purchase price and
date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept
the product within 30 days from the date of purchase. If you
have any questions concerning the money-back guarantee,
please call 800-736-4648 in the U.S. or 800-268-0425 in
Canada.
® Registered Trademark of ROVCAL, Inc.
Questions or comments: Call 800-736-4648 in U.S. or
800-268-0425 in Canada or visit
www.RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Madison, WI 53711
Dist. by: Spectrum Brands Canada, Inc.
Mississauga, ON L5L 0A1
© 2010 ROVCAL, INC 03/10 Job #CS38168
Manufactured to Remington's specifications in the PRC.
T22-28568
Cleaning Your Trimmer
Your nose and ear trimmer is designed to give you years of com-
fortable use. To ensure that you get optimal performance from
your trimmer, follow these simple cleaning and lubricating tips:
After each use, brush or blow accumulated hair from the
cutting unit.
Rinsing Your Trimmer
■ Your Remington®trimmer can be rinsed with cool or warm
water. Just hold the unit's head under the faucet - it is not
necessary to remove the head first. Do not use hot water.
■ If the trimmer needs additional cleaning, the cutting head
can be removed by turning it 1/4 inch counterclockwise and
pulling it off. Then blow out the accumulated hair or rinses it
more thoroughly under running water.
■ Afterward, shake excess water from the cutter head, making
sure that all parts are held together.
■ Replace the head in the same position as it was removed,
turning it 1/4 inch clockwise until it locks into place
Lubricating the cutters
■ After rinsing the unit, apply a drop or two of mineral oil or
baby oil to the cutting teeth.
■ Don’t apply too much oil, or it may spray.
■ Finally, point the trimmer down and away from you, and turn
it on. This spreads the oil evenly and expels any excess.