Remington S1 Smooth Series User manual

2 YEAR WARRANTY WF1000AU
S1 SMOOTH SERIES
LADY SHAVER KIT
To register your product go to
www.remington-products.com.au
www.remington.co.nz
USE & CARE
MANUAL
PLEASE READ
PRIOR TO USE

IMPORTANT SAFETY INSTRUCTIONS
When using appliances, especially when children are present,
basic safety precautions should always be followed, including the
following:
• Always store your shaver in a moisture-free area.
• Only use the parts supplied with this appliance.
• Use of non Remington®parts with this product may give rise to a
hazardous condition.
• Use this shaver only for its intended use as described in this manual.
Do not use attachments not recommended by Remington.
• This appliance should not be used by children or other persons with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their
safety.
• Keep the appliance away from the edge of table or countertops and
out of reach of children and persons with reduced physical, sensory or
mental capabilities.
• This appliance is not a toy. Children shall be supervised to ensure they
do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without
supervision.
• Ensure that the shaver is switched off when cleaning.
• Keep away from flammable materials.
• To prevent accidents keep the appliance away from hair on your head,
your eyelashes as well as clothes, brushes and wire.
• Never drop or insert any object into any opening of this appliance.
• Do not use on people who are asleep.
• Do not use this shaver with a damaged or broken cutting foils or
cutters, as injury may occur.
• For household use only.
SAVE THESE INSTRUCTIONS
2

WF1000AU S1 SMOOTH SERIES LADY SHAVER KIT
Use & Care Instruction Manual
Thank you for purchasing your Remington®S1 Lady Shaver. The model you
have chosen can be used in the bath or shower and is designed to provide a
gentle, close shave.
KEY PARTS
1. Shaving head
2. Head release button
3. Flexible outer foil
4. Flexible trimmer
5. Massaging strip
6. On/Off switch
7. Battery compartment
8. Battery compartment cap
Also includes:
• Bikini Comb
• Storage Pouch
• 2x AAA Batteries
• Cleaning Brush
1
6
7
8
3
4
5
2
3

4
ABOUT YOUR SHAVER
WF1000AU SPECIFICATIONS
Power System Cordless (battery operated)
Waterproof Yes
Massaging Strip Yes
Voltage Type 2x AAA batteries (included)
INSERTING BATTERIES
Your shaver requires 2 ‘AAA’ alkaline batteries (first set included). We
recommend that you use alkaline batteries for optimal performance.
Make sure the product is turned off.
Rotate the battery compartment cap approximately 1/4 turn counter-
clockwise and pull.
Insert 2 “AAA” alkaline batteries, so that the (+) and (-) symbols on the
battery align with the corresponding mark in the battery compartment.
Place cap back on unit using the alignment marks and rotate clockwise
until the cap snaps into place.
Note: Your shaver will not work if the batteries are inserted incorrectly.
Note: Remove batteries if the unit is not in use for long periods.
HOW TO USE
Your shaver is suitable for legs, underarms and the bikini area. It can be
used dry or in the shower.
For Everyday Shaving
1. Remove protective cap.
2. Turn the shaver on.
3. Hold the shaver at a right angle to your skin and move the shaver
against the direction of the hair growth.
4. After shaving, turn shaver off.
Note: Before dry shaving, make sure that the area is clean, dry and free
from creams or oils.

5
For Longer Hair
If you have not shaved for a while, use the flexible trimmer before shaving.
This will help you achieve a more effective shaving result:
1. Turn shaver on.
2. Hold the shaver with the trimmer facing your leg and slightly tilted
towards you (approximately at a 45º angle).
3. Move the trimmer slowly against the direction of the hair growth.
4. After shaving, turn shaver off.
Trimming And Shaping
1. Attach the bikini comb.
2. Turn the shaver on.
3. Hold the shaver at a right angle to your skin and press down gently.
4. Edge and shape the area as desired.
5. After shaving, turn shaver off.
FOR BEST SHAVING PERFORMANCE
We recommend that you use your new shaver daily for two or three weeks
to allow time to find the optimum shaving methods for your particular type
of hair growth patterns.
Caution:
If your skin is easily irritated by shaving, or you suffer from skin allergies,
you should test a section of your arm or leg before using the shaver.
CLEANING & MAINTENANCE
Care For Your Shaver
To ensure long lasting performance of your shaver, clean the head
assembly regularly. The easiest and the most hygienic way to clean the
shaver is by rinsing the shaving head after use with warm water. Always
keep the protective headguard on the shaving head when the shaver is not
in use.
After Each Use
1. Ensure the shaver is turned off.
2. Press the release buttons to open the shaver head.
3. Blow on the foils to remove any loose debris.
4. Brush or rinse the accumulated hair from the main body of the shaver,
shaving head and cutter assembly.

6
5. Leave the head assembly open to let the shaver dry completely.
6. Return the shaving head to its original position and snap in place.
Note:
• Ensure that the shaver is turned off when cleaning.
• Do not clean the shaving foils with the brush.
• At regular intervals, put a drop of sewing machine oil onto the foils and
cutters heads.
• Rinse only with cool or warm water, not hot water. Do not rinse with
water hotter than 70°C.
REPLACING THE FOILS & CUTTERS
Signs that your foils and cutters need replacing:
Irritation: As foils get worn, you may experience skin irritation.
Pulling: As the cutters wear, your shave may not feel as close and you may
feel the cutters pulling on your hair.
Wear: You may notice that the cutters have worn through the foils.
To ensure the continued highest quality performance from your shaver, we
recommend that foils and cutters are replaced every 6 months.
To Replace The Foil
Note: Ensure the shaver is switched off.
1. Remove the shaver head.
2. Gently push the small plastic tabs area at either end of the foil carrier.
The foil carrier should then easily detach from the shaving head.
3. To reassemble, snap the new foil carrier into position.
4. Attach the shaving head.
Caution:
• Only hold the plastic to prevent damage to the foil.
• Do not press on the foil when replacing.
new foil
tabs

Remington is a Registered Trademark of Spectrum Brands, Inc., or one of its subsidiaries.
For replacement parts and accessories contact customer service

MONEY BACK OFFER – AUSTRALIA / NEW ZEALAND ONLY
If within 60 days you are not fully satisfied with your Remington®shaver, just return the shaver
with this completed coupon and a copy of your Australian/New Zealand purchase receipt to
Remington®. In return, we will send you a cheque for the full purchase price of the shaver.
Please allow 6-8 weeks for your cheque to arrive.
Name:
Address:
City:
State: Postcode: DOB: / /
Contact No: Area Code: Ph:
Product Model number:
Is this the first Remington shaver you have owned/purchased? Yes No
Why are you returning this shaver?
Skin Irritation Shave is not close enough Takes too long to shave
Other:
Spectrum Brands Australia Pty Ltd
Locked Bag 3004
Braeside, VIC 3195
AUSTRALIA
Customer service in Australia: 1800 623 118
E-mail: consumer.enqui[email protected]
Website: www.remington-products.com.au
Spectrum Brands New Zealand Limited
PO Box 9817
Newmarket, Auckland 1149
NEW ZEALAND
Customer service in New Zealand: 0800 736 776
E-mail: i[email protected].nz
Website: www.remington.co.nz

10
This product is suitable for use in the bath or shower.
This product conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
To Replace The Cutters:
Note: Ensure the shaver is switched off.
1. Open the shaving head.
2. To remove cutter, grasp cutter between thumb and forefinger and pull
upward.
3. To reassemble cutter, place cutter onto oscillator tip. Gently push
down clicking into position.
DISPOSAL/RECYCLING
Legislation in some localities mandates that e-waste (anything with a plug,
battery or cord) is disposed of through controlled recycling facilities and
must not be disposed of in general household waste. For more information
about recycling of electrical and battery operated appliances, please
contact your local council or your local household waste disposal service.