Remington iLIGHT ESSENTIAL User manual

SKIN
HAIR
Energy
1-5
Energy
1-5
Energy
1-5
Energy
1-5
Energy
1-4
Energy
1-4
Energy
1-3
Energy
1-2

3
©2017 Spectrum Brands, Inc.
All rights reserved.
Legal Notice
Spectrum Brands reserves the right to make changes to its products or
specifications to improve performance, reliability, or manufacturability.
Information furnished by Spectrum Brands is believed to be accurate and
reliable at the time of publication. However, Spectrum Brands assumes
no responsibility for its use. No license is granted by its implication or
otherwise under any patent or patent rights of Spectrum Brands.
No part of this document may be reproduced or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without
the express written permission of Spectrum Brands. Data is subject to
change without notification.
REMINGTON™and iLIGHT™are trademarks of Spectrum Brands, Inc.

4
Table of contents
1. Get to know your device .......................................................5
2. Safety with your device ........................................................6
3. Contraindications & warnings...............................................7
4. Do not use your device if: ..................................................... 9
5. Precautions...........................................................................9
6. Safety tips .......................................................................... 10
7. Possible side effects...........................................................11
8. Long-term hair removal .....................................................13
9. Get started..........................................................................17
10. After treatment ...................................................................20
11. Maintenance....................................................................... 20
12. Troubleshooting ..................................................................21
13. Customer service................................................................ 22
14. Warranty.............................................................................23
15. Disposal..............................................................................25
16. Specifications.....................................................................26
17. Signs and symbols ............................................................ 27
18. Labeling..............................................................................28
19. Declarations .......................................................................29

5
1. GET TO KNOW YOUR DEVICE
The Remington iLIGHT Essential is a light-based device for permanent
hair reduction designed for home use. It is a powerful electrical device
and should be used with special attention to safety. Be sure to read
all warnings, contraindications and safety precautions before use, and
follow them strictly. We recommend you re-familiarize yourself with the
instructions before each treatment.
1.1 Package contents
Your device package includes:
yHair removal device
yUser manual
yAdapter with cable
1.2 Device description
Refer to the diagram at the front of this manual to see the location of each
feature of your device.
1. Adapter socket
2. Energy level indicator lights (1-5)
3. Control button
4. Ready light
5. Treatment window
6. Skin tone tester

6
1.3 Indications for use
This device is an over-the-counter device intended to remove unwanted
hair and effect long-term, or permanent hair reduction. Permanent hair
reduction is defined as a long-term, stable reduction in the number
of hairs regrowing when measured at 6, 9 and 12 months after the
completion of a treatment regimen.
You may use the device to remove unwanted body hair. Ideal body areas include
the underarms, bikini line, arms, legs, face, back, shoulders and chest.
Do not use this device for any purpose other than as described in this manual.
2. SAFETY WITH YOUR DEVICE
With your device, safety comes first
Home Pulsed Light (HPL) technology in your device provides extra
safety with lower energy levels. HPL achieves long-term hair removal
results at a fraction of the energy level used in other light-based hair
removal equipment. The HPL technology reduces the risk of harm or
complications, and contributes to your overall safety. Your device has
additional features to protect your eyes and your skin.
yEyes: Light pulses are only active when the treatment window
is in full contact with the skin. Nevertheless, do not look at the
treatment window when you are using the device. This may cause
damage to the eyes.
ySkin: Your skin is never in direct contact with the optical lens
through which light pulses are emitted.

7
3. CONTRAINDICATIONS & WARNINGS
This device is not designed for everyone. Refer to section "1.3
Indications for use".
Hair removal by lasers or intense pulsed light sources can cause
increased hair growth in some individuals. The highest risk groups for
this response are females of Mediterranean, Middle Eastern and South
Asian heritage when used on the face and neck. For more information
visit www.Remingtonproducts.com.
yThis device must not be used by the following people: anyone
under the age of 18, adults with limited physical, sensory or
psychological capacities, or those lacking experience or knowledge
in how to use the device. Children should be supervised to ensure
that they do not play with the device.
yDo not use on a naturally dark complexion (skin type IV).
yThe device is not effective on naturally white, gray, blonde, and
red hair. If your body hair is one of these colors, the device will not
work on you.
yDo not expose treated areas to the sun. Refer to section "6.1
Exposure to the sun".
yDo not use the device on tanned skin or after recent sun exposure
(including artificial tanning machines).
yUse below the cheekbones and not around the eyes.
yDo not use on areas with injected fills or toxins.
yDo not treat on tattoos or permanent makeup, dark brown or black
spots (such as large freckles, moles, or warts), nipples, genitals,
around the anus, or lips.
yDo not treat on active eczema, psoriasis, lesions, open wounds
or infections (cold sores), or abnormal skin conditions caused by
systemic or metabolic diseases (e.g. diabetes).
yDo not treat on abnormal skin conditions caused by diabetes,
systemic or other metabolic diseases.
yDo not treat on an area that has a history of outbreaks of herpes or
cold sores.

8
yDo not use if you are pregnant or nursing.
yDo not treat on areas where you may want hair to grow. The
results are permanent.
yDo not treat the same area of skin more than once per hair
removal session.
yStop use immediately if your skin is very red, or if your skin blisters
or burns.
yUse a lower energy level if you experience any discomfort.
yNever use flammable liquids such as alcohol (including perfumes,
sanitizers, or other applications containing alcohol) or acetone to
clean the skin before use.
yKeep your device away from water or liquids! Do not use near
bathtubs, showers, basins or other vessels containing water. Do
not place or store the device where it can fall, be pushed or placed
anywhere near water. There is a risk of electrocution. Unplug
immediately if the device comes into contact with any fluids, and
contact Customer Service.
yRemove all jewelry before use.
yNever leave the device unattended when plugged into an outlet.
Keep the AC/DC adapter accessible at all times, so it can be
removed from the socket easily in case of emergency.
yDo not attempt to open or repair your device. You may expose
yourself to dangerous electrical components or pulsed light energy
and cause serious harm to yourself. It will also void your warranty.

9
4. DO NOT USE YOUR DEVICE IF:
yThe adapter, attachments or accessories for this device are not
recommended by Spectrum Brands.
yThe device has a damaged cord or adapter. Keep the power cord
away from heated surfaces.
yYou see or smell smoke when it is in use.
yThe skin tone tester, treatment window, or device casing is cracked
or coming apart.
yThe device is not working or appears to be damaged in any
other way.
In such cases, contact Customer Service.
5. PRECAUTIONS
yDo not use if you have a history of keloidal scar formation.
yDo not use if you have used medication that makes the skin
more sensitive to light, including non-steroidal anti-inflammatory
agents, (e.g. aspirins, ibuprofens, acetaminophen), tetracyclines,
phenothiazines, thiazide, diuretics, sulfonyluraes, sulfonamides,
DTIC, fluorouracil, vinblastine, griseofulvin, Alpha-Hydroxi Acids
(AHAs), Beta-Hydroxi Acids (BHAs), Retin-A®, Accutane®and/or
topical retinoids.
yDo not use if you have been treated, or receiving current treatment,
with Alpha-Hydroxi Acids (AHAs), Beta-Hydroxi Acids (BHAs),
Retin-A®, topical retinoids or azelaic acid.
yDo not use if you have been treated with Accutanex(isotretinoin)
within the past 6 months.
yDo not use if you have a history of epilepsy.

10
yDo not use if you have a disease related to photosensitivity, such
as porphyria, polymorphic light eruption, solar urticaria, lupus, etc.
yDo not use if you have a history of skin cancer or areas of potential
skin malignancies.
yDo not use if you have received radiation therapy or chemotherapy
treatments within the past 3 months, or have areas of potential
skin malignancies.
yDo not use on an active implant, such as a pacemaker,
incontinence device, insulin pump, etc.
yDo not use if you have used physician-prescribed drugs on your
skin within the past 6 months.
6. SAFETY TIPS
This section has information to help you use your device safely.
6.1 Exposure to the sun
yIf you use the device, avoid further exposure to the sun for
4 weeks before and 2 weeks after your treatment. This is
because higher quantities of melanin expose the skin to greater
risk when using any method of light-based hair removal. This
applies to all skin types, even those that don't seem to tan quickly.
yTo protect recently treated skin when exposed to sunlight, be sure
to thoroughly apply sunscreen, SPF 30 or higher, for 2 weeks after
each hair removal session
6.2 Exposure of pulse light to the eyes
yAlthough you can use the device to treat facial hair, take extra care
to avoid contact with the eyes.
yNever use around or near the eyes. The device emits infra-red (IR)
light and may cause damage.
6.3 Wounds or infections
yWait for the affected area to heal before further use.

11
7. POSSIBLE SIDE EFFECTS
If you follow the instructions fully and pay attention to all warnings
and contraindications, complications and side effects are uncommon.
However every cosmetic procedure, including those designed for home
use, involves some degree of risk. Therefore, it is important that you
understand and accept the risks and complications that may occur with
pulsed light hair removal systems designed for home use.
Minor skin discomfort
HPL hair removal is generally well-tolerated. However, some users feel
mild discomfort during use. This is best described as a mild stinging
sensation on the treated skin areas. The stinging sensation may last
during or after treatment.
This means that you should use the device at a lower energy level, and if
that doesn't help, you should stop using the device.
Skin redness
Your skin may become red immediately after using the device or within 24
hours. Redness generally clears up within 24 hours.
Contact Customer Service if redness does not go away within 2 to 3 days.
Make sure you use the energy level that is comfortable for you and
suitable for your skin color. Refer to section 9.1 "Before your first
treatment".
Increased sensitivity of the skin
The skin of the treated area is more sensitive so you may encounter
dryness or flaking of the skin.
Excessive redness and swelling
In rare cases, treated skin may become very red and swollen. This is
more common in sensitive areas of the body. The redness and swelling
should subside within 2 to 7 days and should be treated with frequent
applications of ice. Gentle cleansing is OK, but avoid exposure to the sun.

12
Blisters or burns
Cool the affected area and apply anti-burn cream. Wait until the area has
healed completely before another treatment, and use a lower energy
level. If the skin does not return to normal within 3 days, contact
Customer Service.
Pigment changes
The device targets the hair shaft, in particular the pigmented cells in
the hair follicle and the hair follicle itself. Nevertheless there is a risk of
temporary hyperpigmentation (increased pigment or brown discoloration)
or hypo-pigmentation (whitening) to the surrounding skin. Risk of
changes in skin pigmentation is higher for people with darker skin tones.
Usually discoloration or changes to skin pigment are temporary, and
hyperpigmentation or hypo-pigmentation are rare.
Scarring
Although very rare, scarring may occur. Usually when scarring occurs, it is
in the form of a flat and white lesion on the skin (hypo-trophic). However,
it can be large and red (hypertrophic) or large and extend beyond the
margins of the injury itself (keloid). Subsequent aesthetic treatments may
be required to improve the appearance of the scar.
Infection
Infection of the skin is exceedingly rare but is still a possible risk following
a skin burn or wound caused when using the device.
Bruising
Very rarely, treatment may cause blue-purple bruising that can last 5 to
10 days. As the bruising fades, there may be a rust-brown discoloration of
the skin (hyper-pigmentation).

13
8. LONG-TERM HAIR REMOVAL
The efficiency of hair removal varies from person to person according
to body area, hair color, and how the device is used. A typical full hair
growth cycle may take 18-24 months. During this time, multiple treatment
sessions are required to achieve permanent hair removal.
A typical device hair removal plan during a full hair growth cycle includes:
yTreatments 1-4: Plan two weeks apart.
yTreatments 5-7: Plan four weeks apart.
yTreatments 8+: Treat as needed, until desired results are achieved.
8.1 Expected treatment outcomes
Individual response depends on hair type as well as biological factors
that may affect hair growth patterns. Some users may respond quicker or
slower than the average number of treatments.
Skin Type1Body Hair2
Light
Fluence
[J/cm2]
Part of the Body
Average
Treatment
Time
Effectiveness of
Hair Removal
1-5 Dark blonde
to brown 2.5-4
Lower or
upper legs
Session
10-12, approx.
4 weeks apart
60%
Arms 50%
Bikini line 60%
Underarms 55%
1-5 Brown to
black 2.5-4
Lower or
upper legs
Sessions 8-10
approx. 4
weeks apart
70%
Arms 60%
Bikini line 70%
Underarms 65%
1 Skin types are based on the Fitzpatrick scale of skin colors. Refer to the skin color chart at the
front of this manual.
2 May not be effective on white body hair.

14
8.2 Energy levels
The energy level determines the intensity of the light pulse delivered to
your skin. As the energy level increases, so do hair removal results, as
well as the risk of possible side effects and complications.
yThe device has 5 levels of energy from 1 (the lowest) to 5 (the
highest), represented by 5 energy level indicator lights.
yWhen the device is turned on, the energy level is set to level 1
automatically. Only one energy level indicator light will be on.
yTo change the energy level, press the control button repeatedly to
increase the energy level from 1 to 5. Once at level 5, press the
control button again to reduce the energy level from 5 back to 1.
!To determine the right energy level for your treatment area,
refer to section "9.1 Before your first treatment".
8.3 Pulsing and gliding
Pulsing is the best technique for working at higher energy levels.
yPress the treatment window against your skin. Work in rows (either
across or down as shown in the image). Start at one end of each
row and progress to the other end.
yThe treatment window creates temporary pressure marks on the
treated area so you can see areas you have treated.
yAfter each pulse, move the treatment window to the next spot.
Keep doing this pulsing action for the area you are treating.
yAvoid gaps or overlaps as you use the device.

15
Gliding is the best technique for working at lower energy levels.
yPress the treatment window firmly against your skin and slowly
glide over your skin (either across or down as shown in the image).
Make sure that the treatment window is always touching your skin.
yAt lower energy levels, the device takes only 1-1.5 seconds to
recharge between pulses. This generates a nonstop sequence
of flashes.
yGlide at a speed so that you avoid gaps or overlaps.
yDo not treat the same area of skin more than once per hair
removal session.
yStop use immediately if you have any discomfort.
8.4 The skin tone tester
Light-based hair removal on darker skin tones may result in adverse
effects such as burns, blisters, and skin color changes (hyper- or
hypo-pigmentation). Your device has a skin tone tester that detects the
color of your skin automatically. The skin tone tester checks your skin
color at the start of, and occasionally during, each treatment.
!If your skin tone is too dark for safe use, the device will not
operate, and the skin tone tester light will blink.

16
8.5 What to expect when treating with your device
For many people, using the device may be their first experience with a
light-based device. During a treatment session it is normal to experience
or feel:
yNoise: The cooling fan makes noise similar to a hair dryer. This
is normal.
yA popping sound: With each flash of HPL™light.
yA sensation of warmth and tingling: During each light pulse.
ySome redness: It is not uncommon to see some very mild, pink-
like skin coloration during or just after a treatment. This is usually
most noticeable around the hairs themselves.
yStop use immediately if you see your skin is very red.
yContact Customer Service immediately if you have any complications.

17
9. GET STARTED
To use your device follow these steps:
1. Remove the device and other components from box.
2. Plug the adapter cord into the device socket and plug the adapter
into an electrical outlet. All energy level indicator lights will turn on,
and then go off.
9.1 Before your first treatment
!Remove all jewelry before each treatment.
You must decide which energy level is right for your skin and the area
you want to treat. The device has 5 levels of energy from 1 (the lowest)
to 5 (the highest). For example, you might treat one area at energy
level 1, and another at level 4. For information on energy levels, refer to
section "8.2 Energy levels".
Test a patch of skin
To choose the right energy level, test each treatment area separately
(refer to the skin color chart at the front of this manual).
1. Press the control button to turn on the device. The level 1 energy
level indicator light will go on.
2. Place the treatment window on your skin to deliver one pulse.
If you did not experience abnormal discomfort after 24 hours,
increase the energy level on your next test spot. To increase the
energy level, remove the device from your skin and press the
control button again. This will increase the energy level.
3. Deliver one pulse on a different spot at energy level 2. Use the
energy levels indicated on the skin color chart. Wait 24 hours. If
there are no adverse effects, use a different test spot and continue
testing at increased energy levels to find the highest level that is
comfortable for you, without adverse effects.
4. When you find the highest energy level that is most comfortable
for that treatment area, you can start your treatment.

18
NOTES:
yThe device will only emit repeated pulses when it is in firm
contact with your skin, and you keep moving it across your skin.
yUse a lower energy level if you experience any discomfort. Be sure
to do a spot test for each part of the body you wish to treat.
9.2 Treatments with your device
Follow these steps each time you treat an area:
1. Before treating an area, the skin should be shaved, clean, dry and
free of any powders, antiperspirants or deodorants. Do not wax,
pluck or tweeze the hair out.
NOTE: Do not use on moles, warts or other marks on the skin that
should not be treated.
2. Press the control button. The device will turn on, the level 1 energy
indicator light will be on, and a fan sound will start.
3. Approximately 1 second after pressing the control button, the
ready light will turn on (#4 in the diagram). The device is then
ready to use at the lowest energy level.
4. Set the energy level. Press the control button repeatedly to
increase the energy level until you have the level you want. The
energy level indicator lights indicate the energy level setting (refer
to section "8.2 Energy levels").
5. Decide if you wish to treat the area by Gliding or Pulsing (refer to
section "8.3 Pulsing and gliding").
6. Apply the treatment window to the skin (#5 in the diagram).
Make sure that the skin is spread evenly and smoothly. When the
treatment window is in full contact with the skin, the ready light
will start blinking slowly.
7. The device will first determine the color of your skin automatically
and it will flash a pulse of light onto your skin. You will feel a
mild sensation of warmth and tingling, and you may hear a
popping sound.

19
!The device will not operate if your skin tone is too dark for
safe use.
!If you are pulsing, remove the device from your skin. The
device will immediately recharge for the next pulse. After a
few seconds (depending on the energy level) the ready light
will turn on again, and will pulse when pressed against
the skin.
8. If you are pulsing, repeat the process. If you are gliding,
simply continue.
9. Continue to pulse or glide until you have treated the area fully.
!Stop use immediately, if your skin blisters or burns.

20
10. AFTER TREATMENT
When you have finished your treatment session:
1. Press and hold the control button to turn the device off. Remember
the last energy level setting you used, because it will not be
restored when you turn the device on again.
2. Remove the adapter from the electrical outlet.
11. MAINTENANCE
It is important to clean the device after each treatment.
yUnplug the device.
yTo clean the device including the treatment window, wipe with
a clean, dry cloth. Never use acetone or other abrasive fluids,
because they will damage your device.
yAfter cleaning, we recommend you store the device in its
original box.
yNever immerse the device or any of its parts in water.