REMOVU P1 User manual

USER MANUAL
Turn your GoPro®LCD Touch BacPac
into a Wi-Fi Live Viewer

Table of Contents
1. Understanding This User Manual 3
2. Product Components and Features 4
3. Using REMOVU P1
Charging the Battery
How to Assemble
Turning Your Device On and OFF
Wi-Fi Connection: Connecting Your GoPro for the rst time (HERO3, 3+)
Wi-Fi Connection: Connecting Your GoPro for the rst time (HERO4)
Wi-Fi Connection: Connection Failure / Reconnect
LCD Screen Indicators
Navigating Your Device
Controlling GoPro (Power On / Off)
5
5
5
6
7
8
9
10
11
12
4-1. Modes and Settings - HERO3, 3+ Series 13
4-2. Modes and Settings - HERO4 Series 18
5. Firmware Upgrade 21
6. Product Specication 22
7. Trouble Shooting Guide 23
8. Warranty Information 24

3
Thank you for purchasing our Wireless GoPro Live Viewing Device, REMOVU P1
(hereinafter referred to as “P1”).
This Operator’s Guide describes how to handle and operate the P1.
Before using the P1, be sure to read this manual thoroughly for proper operation.
To enhance the performance of the product, the contents of this instruction manual
may be changed without prior notice.
(1) In accordance with Personal Information Security Law & related legislation, essel-t
Co., Ltd. will not be held responsible for any problem due to illegal use of this
product.
(2) Any defects or damage resulting from accident, misuse, abnormal use, abnormal
conditions, and improper storage will not be covered by the warranty.
(3) The warranty shall cover a period of 1 year. Please refer to Pg. 24 for more details.
(4) Use only a dry soft cloth or clean wipe when cleaning the LCD panel surface. Do
not use other cleaning substances. It may cause discoloration or damage to the
surface of the product.
(5) Keep away from children and pets. Store your devices out of the reach of children.
(6) REMOVU is the registered trademark of essel-t Co., Ltd. essel-t Co., Ltd. reserves
the rights regarding all works related to the REMOVU brand such as product de-
sign, trademarks, and product-promotional videos. It is prohibited to reproduce,
copy, modify, or use related works without permission. Any violation may be
penalized in accordance with the relevant regulations.
(7) GoPro, HERO, the GoPro logo, and the GoPro Be a HERO logo are trademarks or
registered trademarks of GoPro, Inc.
Safety Precautions
1. Understanding This User Manual

4
Package Component
Please make sure your package includes all of the following items.
SET WRISTBAND USB CABLE QUICK GUIDE
2. Product Components and Features
Names of Each Part
1. Shutter / Select
2. Power / Mode / Next
3. ESC / Previous
4. Status LED
5. Charging Status LED
6. Reset
7. USB Connector
5
1
2
3
4
6
7

5
1. Connect the device to a computer
USB port using the micro USB
cable included in the package.
Charging the Battery
*The battery should be fully charged before using P1 the rst time.
2. P1 can also be charged with a
USB power adapter.
(Adaptor’s not included)
We recommend using GoPro, or
Apple iphone adaptors.
3. Using the REMOVU P1
How to Assemble
1. Open the cover and detach it from the body.
2. Place the LCD Bacpac into the slot as below.
3. Attach the cover and lock the clamp.
P1 Cover
GoPro®LCD
Touch BacPac P1 Body

6
Turning Your Device On and OFF
Turning it on
1. Press the M (Mode / Power) button for about 1
second to turn on the power.
2. The REMOVU logo will appear. After short loading,
Wi-Fi network list will pop up.
1. Press the M (Mode / Power) button for about 2
seconds to turn off the device. REMOVU Power off
logo will appear then the device will be turned off
with the red LED blinking three times.
2. If no input is made for 30 seconds in the Live View
Mode, the screen will shut off to save power.
Turning it off
POWER OFF

7
Wi-Fi Connections:
Connecting Your GoPro for the rst time. (HERO3, 3+ Users)
4. Please type the password and press enter.
5. You will see Blue LED light when the connection is successfully established.
1. Please go to the GoPro App settings menu on your HERO3, 3+ to turn on the Wi-Fi
function.
2. Turn on your REMOVU P1.
3. When the Select Camera Network Screen appears, select your GoPro’s SSID which
you have created.
1. Go to GoPro support page on GoPro Website to
upgrade your GoPro Camera to the latest rm-
ware version.
2. While upgrading, you will be asked to set up Wi-Fi
SSID, Password. Please make sure to remember
your password and SSID.
HERO3, 3+ Wi-Fi SSID, and Password setup
Connecting your GoPro HERO3, 3+ to REMOVU
www.gopro.com
/support

8
1. Install the GoPro App on your Smartphone.
2. Go to your GoPro 4 Setup ► Wireless ► select
GoPro App. 6 digit Pin number will appear.
3. Open the GoPro App and connect your GoPro
Camera.
4. Enter the 6 digit Pin number that the GoPro Cam-
era is showing.
5. Create the SSID, and Password for your Camera.
6. After the connection is established, shut down the
App.
2. Turn on your REMOVU.
3. Select the SSID you generated from the Select Camera Network list.
4. Enter the password you created.
5. The Blue LED will turn on when the connection is established successfully.
Wi-Fi Connections:
Connecting Your GoPro for the rst time. (HERO4 Users)
HERO4 Wi-Fi SSID, and Password setup
Connecting your GoPro HERO4 to REMOVU
1. Turn on your HERO4 camera and go to HERO4 Setup ► RC & App ► Select Exist-
ing to turn on the Wi-Fi function.

9
Wi-Fi Connection: Connection Failure / Reconnect
1. Flashing red LED and Wi-Fi Network Not Connected message will appear if Wi-Fi
fails to connect or lose its signal.
2. Type in your password again and try reconnecting the device.
3. If the connection is restored, blue LED will ash and the Live View will appear.
4. When reusing the device, P1 will try to connect to last device it was connected to
using the information saved from previous use.
5. Switching between different cameras can be done in the Settings mode ► Cam-
era Network menu. Please choose the camera you wish to switch to.
Tips: When the Wi-Fi signal gets weaker, it may cause lags or the screen
may not display the screen.

10
TOUCH DISPLAY It adjust your REMOVU display settings
Wi-Fi NETWORK
It lists the available Wi-Fi network you can connect to
SYSTEM INFO It displays the general information of the device
LCD Screen Indicators
To Adjust Settings
The settings can be adjusted in the Setting Mode. Please navigate to the settings
mode using the M (Mode / Power) button, and enter the menu by pressing the REC
(Shutter / Select) button
The list of the settings are:
7
1 2 3 4 5
6
8
1. Camera Modes / FOV Indicator
2. Saved Image / Video Counter
3. Remaining Recordable Hours /
Number of Photos Counter
4. Wi-Fi Signal Strength Indicator
5. GoPro Battery Life
6. Resolution / FPS
7. P1 Battery Life
8. Shooting Mode Indicator

11
Navigating Your Device
After the device is powered on and Wi-Fi connection is established, it goes into the
Live View mode automatically. From there, you can simply navigate through different
functions using the Back button or the touch screen. The order of appearance of the
functions are illustrated below.
Display
Camera
Modes
Camera
Mode
Settings
Playback
Mode
REMOVU
Modes
Swipe Left
Swipe Up
Swipe Right
Swipe Down

12
Controlling GoPro (Power On / Off)
The RED triangle at the top-right corner of the but-
tons indicate that the device is turned on.
Press and hold the M button for about 2 seconds
until Power control menu appears. You will be given
3 options to chose from.
- REMOVU Power Button: Turns On/Off REMOVU
- GoPro Power Button: Turns On/Off GoPro
- Power Button for both: Turns of both devices
Note: Because of GoPro camera’s protocol, the connection between REM-
OVU and GoPro may get disconnected when either devices are turned
off. This function will not be available when the connection is lost.

13
4-1. Modes and Settings - HERO3, 3+ Series
VIDEO Record Video
PHOTO Capture a single Photo
BURST PHOTO Capture up to 30 Photos in one second
TIME LAPSE Capture a series of Photos at timed intervals
SETTINGS Adjust camera Settings
Menu Tree
Menu Rotation Sequence

14
To record video, please swipe from right to left or tap the arrow on the right side of
the screen or using the M button on the side of the device to change modes. Video
icon appears at the top left corner of the Live View OSD.
To start recording:
Press the REC (Shutter / Select) button. The red LED Lights will ash while recording.
To stop recording:
Press the REC (Shutter / Select) Button while recording. The red LED light will ash
three times and stops recording.
VIDEO
PHOTO
BURST PHOTO
To capture a Photo, select the photo mode on the touch screen, or press the M button
repeatedly until the Photo icon appears at the top left corner of the Live View OSD.
To take a photo:
Press and release the REC (Shutter / Select) Button. The red Camera Status Lights
ash when photos are taken.
In Burst Photo mode your camera takes multiple photos in short time intervals.
Please select the mode using the touch screen menu or press the M button repeat-
edly until the photo icon appears at the top left corner of the Live View OSD.
To take a burst photo:
Press the REC (Shutter / Select) Button. The red Camera Status Lights ash and the
camera captures photos multiple times.
Available interval options:
3 photos / 1 second, 5 photos / 1 second, 10 photos / 2seconds, 30 photos / 1 sec-
ond, 30 photos / 2 seconds or 30 photos / 3 seconds.
Tips: The Live View may not work some resolution settings. When you
start recording in resolutions that are not supported, the message
“PREVIEW NOT SUPPORTED” will appear on the screen. When you stop
recording, the live view will be displayed again.
Tips: Sometimes 30 photos / 1 second can be too fast. Try a slower BURST
PHOTO setting to get better results.

15
TIME LAPSE
Time Lapse mode automatically captures a series of photos at 0.5, 1, 2, 5, 10, 30 or
60 second intervals.
To capture a Time Lapse series, select the photo mode on the touch screen, or
please press the M button repeatedly until the Time Lapse icon appears at the top
left corner of the Live View OSD.
To take time lapse photos:
Press the REC (Shutter / Select) Button. The camera initiates countdown and the red
Camera Status Lights ash each time a Photo is taken.
To stop time lapse photos:
Press the REC (Shutter / Select) Button. The red Camera Status Lights ash three
times to indicate that Time Lapse has stopped.
How to Change Camera Settings
The camera settings can be adjusted in the Setting Mode. Please navigate to the Set-
tings mode using the touch menu or pressing M (Mode / Power) button repeatedly
until above screen appears.
VIDEO RESOLUTION Adjust the video resolution
PHOTO RESOLUTION Adjust the photo resolution
CONTINUOUS PHOTO Adjust the number of shots
BURST PHOTO Adjust the speed
TIME LAPSE Adjust the interval
Settings Menu

16
VIDEO RESOLUTION / FPS / FOV MODES
PHOTO RESOLUTION SETTINGS
The Resolution, fps (frames per second) and FOV (eld of view) can be changed in
the Video mode menu. You can also turn Auto Low Light mode ON / OFF.
To change Video Mode settings:
1. Press the REC (Shutter / Select) Button to enter
(VIDEO RESOLUTION / FPS / FOV MODES).
2. Use the M (Mode / Power) to navigate through options or by touch.
3. Press the REC (Shutter / Select) button to enter desired menu.
4. Use the M (Mode / Power) Button to cycle through each sub-menu option and the
REC (Shutter / Select) button to select it.
5. To change additional options, repeat step 4.
6. When all settings are adjusted, press the Back button to exit.
The photo resolution can be adjusted here. The changes are applied to Photo, Photo-
Burst, Time Lapse modes.
Photo Resolution / Field of View (FOV)
12MP / Wide
7MP / Wide
7MP / Medium
5MP / Medium
Note: The modes may vary across different models.
Note: The options may vary across different models.

17
CONTINUOUS PHOTO
TIME LAPSE SETTINGS
BURST PHOTO OPTIONS
Continuous Photo mode allows you to capture a series of 3 Photos by pressing the
REC (Shutter / Select) button.
Speed Options:
SINGLE
Takes 3 photos in 1 second
Takes 3 photos at speed of 5 photos/sec
Takes 3 photos at speed of 10 photos/sec
Several time interval options are available for Time Lapse mode, including 0.5, 1, 2, 5,
10, 30 and 60 seconds.
Additional Note:
The sub-menus are structured identical to GoPro. Please refer to GoPro manual for
details.
REMOVU’s Back buttons works the same way as GoPro’s Exit button.
The options may vary across different models.
Burst Photo mode captures a series of Photos when the REC (Shutter / Select) Button
is pressed.
Photos can be captured at the following rates:
3 photos in 1 second
5 photos in 1 second
10 photos in 1 second
10 photos in 2 seconds
30 photos in 1 second
30 photos in 2 seconds
30 photos in 3 seconds
Tips: Your camera will remain in Continuous Photo mode until you change it
back to single Photo capture mode.
Tips: The options may vary across different models.

18
4-2. Modes and Settings - HERO4 Series
VIDEO Record Video
PHOTO Capture a single Photo
MULTI-SHOT Capture a series of photos (Time Lapse, Burst, etc)
SETTINGS Adjust general camera settings
Menu Tree
Menu Rotation Sequence
Please select the mode using the touch screen menu or M (Mode / Power)
button to navigate across different modes.

19
Video Captures video.
Video + Photo
Simultaneously captures both video and photos. You can set
the camera to capture a photo at selected intervals while
you record video. For details, see Video + Photo Intervals in
this section.
Looping
Lets you continuously record and save only the best mo-
ments, which helps to conserve space on your microSD
card. You must select an interval.
Single Photo Captures single photo.
Continuous
Photos Captures multiple photos continously.
Night Photo Captures single photo in low light environments.
VIDEO MODE
PHOTO MODE
Sub Menu Tree
Please select the mode using the touch screen menu or long-press REC (Shutter
/ Select) button while in the desired Camara Mode to change the capture mode
in the order listed of above.

20
Burst Captures up to 30 photos in 1 second. Perfect for capturing
the denitive moment in fast-action sports.
Time Lapse
Captures a series of photos at specied intervals. You can
use Time Lapse to capture photos of any activity, so you can
choose the best ones later.
Night Lapse
Captures a series of photos at specic intervals and ex-
posure times. Use Night Lapse in low light environments,
such as when capturing the night sky over a period of time.
For available exposure times and examples of when to use
them, see Shutter in Mult-Shot Settings.
MULTI-SHOT MODE