Remta R50 User manual

COMMERCIAL TYPE FILTERED COFFEE MACHINE
Producer: REMTA MAKİNA İTH. İHR. SAN. TİC. LTD. ŞTİ.
Producing Address: Akçaburgaz Mah. 4. Cad. 153. Sok. No:23 34522 Esenyurt - İstanbul
[phone] • [email protected] • www.remta.com.tr
MODELS: R50-R51-R52
USER MANUAL

1. PRESENTATION
Dear user;
Our best thanks to you about you to choose our product and
trust in us. Our products are used in lots of domestic cities like
your choice. Our product is manufactured according to the
standard rules. We kindly remind that you to read the user manual
carefully for having the best performance against your expectations
from the product and using for long time and be sure the other
users read it, too. Please care about the rules written below before
calling the service.
2. WARNINGS
Please read this manual carefully and be sure the other users read it,
before the product is installed and operated for first. The product
will be out of warranty if you operate the device without reading
the user manual. The user manual should be written carefully to
install, use and the maintenance of the product that you have
bought. The electrical circuit that you will plug in your product,
should be suitable for the legislations. The faults are in your
responsibility which are occurred by your electrical circuit. Please
call the authorized service to have more information about the
subjects that you have doubts or misunderstand. We wish you to
have the best performance from the product. You will be charged
when you want service next to you about this product.
3. DESCRIPTION AND PURPOSE OF THE PRODUCT
The device is produced to make and serve filtered coffee which is used
in the industrial kitchen services (collective food services, restaurants,
touristic places, buffets and etc.)

4. SAFETY DETAILS
• The device works with 220-230 Volt ~ 50-60 Hz electricity.
• If the electrical cable is damaged please contact with the service.
• The device should be switched off before plugged into the electricity.
• The all flammable solid and liquid materials (cloth, alcohol kinds, petrochemical
materials, wooden materials, plastic materials and curtain) should be removed
from the area that the device is operated.
• Do not clean the product under flowed and pressured water.
• The device can be used together with our other products in the same product serie.
There has to be at least 30 cm between the each product.
• The device should be located and operated in a suitable for legislation
and well aired place. Please check the instructions before locating and
operating the device.
• The device is produced to use for industrial purposes and should be used by the
well educated person.
• Noone should try to fix the device except the producer and the authorized service.
• If any flame occurs next to the devicein the close location, please shut down
the gas valves and the circuit breaker with out any panic. Use fire extinguisher.
Never use water to extinguish the flame.
• The device should be plugged into the grounded socket out. Be sure that
you have grounded line in your electricity circuit.
• All user should read the user manual.
• Keep away from the children.
• Do not use the device out its main purpose.
• Do not close the air flow holes of the device.
• The device should be located on a non-flammable surface.
• Do not operate it next to the hot machines.
• It has to be operated in a well aired place.
• Do not operate it under the sunlight directly.
• Do not operate the device with out any water. Otherwise the device becomes out
of warranty.
• The lime on the resistance should be cleaned. Otherwise the device gets cracked
and becomes out of warranty. Only use vinegar or lemon salt to clean the lime.
• Do not carry the device when it has hot water in it.
• Do not insert any conductive or insulation material inside of the device.
• Do not fill the tank with water more than the requirement.
• Please use heat resistant glove against its hot surfaces.

5. USING THE DEVICE
5.1. FIRST USE:
• Unpack the device from its box and check if it is damaged or not.
Do not operate it if it is damaged..
• Take out the protection bands if there is.
• Clean well and carefully the parts of the device which touch directly to the food.
• Clean the device with dish detergent and dry it. do not let the water touches
to the electrical parts.
• Do not clean the device in a dish washer.
5.2. USAGE:
• Plug in the device to the electricity socket out. Be sure the switch is turned off.
• Fill the water tank with the required amount off water.
• Fix the filter in to the device correctly. The pipe part should be fixed inside of
the resistance.
• Fill the coffee as requried amount. Turn on the switch.
• The coffee will be filtered from the filter when the water gets boiled. The coffee
will be ready to be served at the end of the filtration.
• Always there has to be water in the water tank. Otherwise the device should
be damaged.
• Please turn off the switch after the service ends.
• Please plug out the device from the electricity.
• The filter should be empty and cleaned.
• Please plug out the device from the electricity when the device is out of use.
• Operate the device on a flat surface.
5.3. CLEANING:
• Plug out the device from the electricity socket before cleaning.
• The food tank should be cleaned very well after every use.
• Do not flow water to the elecrical parts. Clean the main body with a wet cloth.
• Do not clean the main body under flow water
• The filter should be cleaned very well.
• Clean the lime on the resistance using via vinegar or lemon salt. If you use
any chemical cleaner the device will be damaged and out of warranty.
If the lime is not be cleaned the device will be out of warranty.
5.4. CARRYING AND MOVING
• Plug out the device from the electricity socket before cleaning.
• It can be carried by human power.
• Do not bump or drop the device while you carry it.

5.5. MONTAGE:
• The under set desk should be parralel with the ground and have adjustable legs
when the device is use on it.
• The electricity circuit should be checked by authorized person and has to be
connected to the circuit breaker that located at least 170 cm height.
• The electricity circuit should have a leakage current breaker as 30 mA.
• The device should be used with grounded electricity circuit.
5.6. EFFICIENCY USE
• Switch off the device when it is out of use.
• Allways keep the device clean.
• Please obey the directives written in the user manual.
• At 24 °C, you can have the best performance from the device.
• The device can work between -5 and +40 °C.
6. CLEANING AND MAINTENANCE
6.1. CLEANING:
• Clean the out surface with a sponge via using dish detergent and dry it out
after every end of service beginning the first use.
• Do not use nitric acid or any kind of CHEMICAL MATERIALS to clean the device.
• Clean the lime on the resistance using via vinegar or lemon salt. If you use
any chemical cleaner the device will be damaged and out of warranty.
Allways clean the lime.
6.2. MAINTENANCE:
• Before any maintenance plug out the device from the electricity socket.
• Worn off parts should be replaced with the original exparts.
• The periodical maintenance should be done by the user.
• We recommend to maintenance for about per every 2 months according
to the using frequency.
• It will be charged to user for maintenance even the device is warranty.
6.3. LIFE OF THE DEVICE
The life of the device is about 10 years if it is used according to the
recommendations in the user manual.

6.4. FAULTS AND FAULT SOLUTIONS
1- The device is connected to the electricity socket out but it is not working!
• Check the main circuit breaker,
• Check the electric cable of the device,
• Check the thermostat,
• If the problem still continuous please call the authorized service.
Do not struggle to fix it by your self.
6.5. SERVICE AND EXPART POINT
REMTA MAKİNA İTH. İHR. SAN. ve TİC. LTD. ŞTİ.
Adres: Akçaburgaz Mah. 4. Cad. 153. Sok. No:23 Esenyurt / İstanbul
Tel: [phone]
ser[email protected] • www.remta.com.tr
You can find all coomunication information about our services in the link below.
www.remta.com.tr/yetkili-servisler

FİLTRE KAHVE OTOMATI
REMTA MAKİNA • AKÇABURGAZ MH. 4.CD 153.SK. NO:23
ESENYURT / İSTANBUL / TURKEY • TEL: [phone]
MADE IN TURKEY
SERİ NO:
www.remta.com.tr
220 - 230 V 50-60 Hz
11 A
2400W
I / IP 20
4 KG
355x315x445 mm
ÜRÜN KODU: R50 (9 lt)
MODEL: 80 FİNCAN / 80 CUPS FILTER COFFEE AUTOMAT
VOLTAJ / Voltage
AKIM / Nominal Current
GÜÇ / Power
ÜRÜN SINIFI / Product Class
AĞIRLIK / Weight
EBAT / Dimensions
...........................................:
................................:
..................................................:
.......................:
..........................................:
........................................:
7. TECHNICAL PROPERTIES AND THE LABELS
WARNING! GROUNDED ELECTRICITY CIRCUIT

8. PARÇALARIN TANIMI
HANDLE HANDLE
TOP COVER TOP INNER COVER STICK SHAFT COVER WITH FILTER STICK MAIN BODY TAP SET AND LEVEL INDICATOR THERMOSTAT SIGNAL LAMBS RESISTANCE
THERMOSTAT STICK
ELECTRICAL CABLE
LIMITED THERMOSTAT RESISTANCE
BOTTOM CASE
BOTTOM COVER SHEET