Renesas RTE7701202CBG304T000J User manual

User’s Manual
R20UT2989EJ0100 Rev. 1.00 Page 1 of 4
Sep. 05, 2014
RTE7701202CBG304T000J
Exchange Adapter for Connecting RH850/E1x Series
in 304-pin 0.8-mm-pitch BGA
1. Outline
The RTE7701202CBG304T000J is an exchange adapter (EA) for
connecting the RTE7701202EPA00000J emulator pod for the RH850/E1x
(subsequently referred to as the pod) to pad patterns for a 304-pin 0.8-mm-pitch
BGA (PRBG0304GB-A).
2. Package Components
Check to see if the RTE7701202CBG304T000J package has all the following
contents with reference to Contents of the Package included in the package after
purchasing this product.
(1)
RTE7701202CBG304T000J exchange adapter
1 pc.
(2)
Table of Toxic and Hazardous Substance and Elements 1 sh.
3. Specifications
Table 1 Specifications
Applicable package PRBG0304GB-A
(304-pin 0.8-mm-pitch BGA)
Insertion/removal
iterations of connector 100 times guaranteed
4. Usage (See Figure 2)
The RTE7701202CBG304T000J can be used for debugging and on-board
evaluation in common by mounting the TC on the target system.
(1) For debugging
Mount the TC on the pad pattern for the MCU on the target
system board. In addition, connect the RTE7701202CBG304T000J to the pod,
and then attach the RTE7701202CBG304T000J above the TC.
The height of the socket is adjustable by inserting the SA1 or SA2 between
the TC and RTE7701202CBG304T000J if this is desired.
(2) For on-board evaluation
The TC on the user system is used to attach the MA after it has been fitted
with an MCU that has flash ROM or a one-time PROM.
Before using the RTE7701202CBG304T000J, be sure to read the precautions
on page 3.
* BSSOCKET, CSSOCKET, and LSPACK are the trademarks of Tokyo Eletech Corporation.
R20UT2989EJ0100
Rev. 1.00
Sep. 05, 2014
Figure 1 External View of the RTE7701202CBG304T000J
Figure 2 Usage of the RTE7701202CBG304T000J
SA1: Space adapter (sold separately, product of Tokyo Eletech
Corporation)
Model Name: CSSOCKET304A2219RE03
SA2: Space adapter (sold separately, product of Tokyo Eletech
Corporation)
Model Name: CSSOCKET304A2219RE04
TC: Target connector (sold separately, product of Tokyo Eletech
Corporation)
Model name: BSSOCKET304A2219RE21N
MA: Mounting adapter (sold separately, product of Tokyo Eletech
Corporation)
Model name: LSPACK304A2219RE01
RTE7701202CBG304T000J exchange adapter
●In the figure indicates an example of the location of the pin that governs
alignment. Be sure to align the pin one positions of the pad pattern on the board
and other parts.
Flash memory MCU and etc.
(MA: Inserted into the
LSPACK)
TC: BSSOCKET
(2) For on-board evaluation
(1) For debugging
R
ENESAS
RTE7701202EPAxR
SA1:CSSOCKETxxRE03
or
SA2:CSSOCKETxxRE04
MA: LSPACK
RTE7701202CBG304T000J
Pod for RTE7701202EPA00000J (sold separately)
304-pin 0.8-mm-pitch
(PRBG0304GB-A) pad patterns

RTE7701202CBG304T000J User’s Manual
R20UT2989EJ0100 Rev. 1.00 Page 2 of 4
Sep. 05, 2014
5. Connection Procedure (See Figure 3)
The procedure for connecting the RTE7701202CBG304T000J is shown below.
(1) Mount the TC on the user system.
(2) Attach the RTE7701202CBG304T000J to the pod.
(3) Attach the RTE7701202CBG304T000J to the TC.
Confirm that there are neither cracks nor bends on the contact pins of the
RTE7701202CBG304T000J at the time it is attached.
Adjusting the height of the socket
The height of the socket is adjustable by inserting an SA1 or SA2 between
the TC and the RTE7701202CBG304T000J.
For more information on the SA1 and SA2, contact Tokyo Eletech
Corporation.
6. Drawing of the Socket Assembly, Drawing with Dimensions, and Pad Pattern for
Reference
xxMHz
9.6
BSSOCKET
RTE7701202CBG304T000J
Pod
Unit [mm]
55.0
Figure 4Drawing of the Socket Assembly
(1)
(3)
●In the figure indicates an example of the location of the pin that governs
alignment. Be sure to align the pin one positions of the pad pattern on the
board and other parts.
R
ENESAS
RTE7701202EPAxR
(2)
SA1:CSSOCKETxxRE03
or
SA2:CSSOCKETxxRE04
TC:BSSOCKET
Figure 3 Procedure for Connecting the
RTE7701202CBG304T000J
SA1: Space adapter (sold separately, product of Tokyo Eletech
Corporation)
Model Name: CSSOCKET304A2219RE03
SA2: Space adapter (sold separately, product of Tokyo Eletech
Corporation)
Model Name: CSSOCKET304A2219RE04
TC: Target connector (sold separately, product of Tokyo Eletech
Corporation)
Model name: BSSOCKET304A2219RE21N
MA: Mounting adapter (sold separately, product of Tokyo Eletech
Corporation)
Model name: LSPACK304A2219RE01
Pod for RTE7701202EPA00000J (sold separately)
RTE7701202CBG304T000J
304-pin 0.8-mm-pitch
(PRBG0304GB-A) pad patterns

RTE7701202CBG304T000J User’s Manual
R20UT2989EJ0100 Rev. 1.00 Page 3 of 4
Sep. 05, 2014
Unit [mm]
*This dimension is increased by 3.2 mm if CSSOCKET304A2219RE03 or
CSSOCKET304A2219RE04 is used to adjust the height of the socket.
0.8 × 21 = 16.8
0.8 × 21 = 16.8
0.8 × 5 = 4.0
0.8 × 5 = 4.0
0.8
40.0
55.0
2
RTE7701202CBG304T000J
CN1 CN2 CN3
60 62
159 61 119
260 62 120
159 61 119
119 61 59 1
120 62 60 2
120
MADE IN JAPAN
9.0
9.0
5.0
16.5
16.5
8.1*
Figure 5Drawing with Dimensions and a Pad Pattern for Reference
7. Precautions and WEEE Directive
CAUTION
Cautions to be Taken for This Product:
Inquiries regarding the combination of CSSOCKET304A2219RE03 and CSSOCKET304A2219RE04 used for adjusting the height
of the assembly, please send an email to the address below.
Tokyo Eletech Corporation http://www.tetc.co.jp/e_index.htm
IMPORTANT
Note on This Product:
This product is not reparable.
Inquiries regarding the purchase of BSSOCKET304A2219RE21N, CSSOCKET304A2219RE03, CSSOCKET304A2219RE04,
and LSPACK304A2219RE01, please send an email to the address below.
Tokyo Eletech Corporation http://www.tetc.co.jp/e_index.htm
Disposal Instruction (This is only valid in the European Union.):
Renesas development tools and products are directly covered by the European Union's Waste Electrical and Electronic
Equipment, (WEEE), Directive 2002/96/EC. As a result, this equipment, including all accessories, must not be disposed of as
household waste but through your locally recognised recycling or disposal schemes. As part of our commitment to environmental
responsibility Renesas also offers to take back the equipment and has implemented a Tools Product Recycling Program for
customers in Europe. This allows you to return equipment to Renesas for disposal through our approved Producer Compliance
Scheme. To register for the program, click here “http://www.renesas.com/weee".

Notice
1. Descriptions of circuits, software and other related information in this documentare provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits,software,and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
2. Renesas Electronics has used reasonable care in preparing the information included in this document, butRenesas Electronics does not warrantthat such information is error free. Renesas Electronics
assumes no liability whatsoever for any damagesincurred by you resulting from errorsin or omissions from the information included herein.
3. Renesas Electronics does not assume any liability for infringement ofpatents,copyrights, orother intellectual property rights ofthird parties by or arising fromthe use of Renesas Electronics products or
technical information described in this document. No license, express,implied or otherwise, is granted hereby underany patents,copyrights or other intellectual property rights ofRenesas Electronics or
others.
4. You should not alter, modify,copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or
third parties arising from such alteration, modification, copyor otherwise misappropriation of Renesas Electronics product.
5. Renesas Electronics products are classified according to the following two quality grades:"Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on
the product's quality grade,as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neitherintended norauthorized foruse in products or systems thatmay pose a directthreatto human life or bodily injury (artificial life supportdevices or systems, surgical
implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You mustcheck the quality grade of each Renesas Electronics product before using it
in a particular application. You may notuse any Renesas Electronics product forany application forwhich it is not intended. Renesas Electronics shall not be in any way liable forany damages or losses
incurred by you orthird parties arising from the use ofany Renesas Electronics productfor which the product is not intended by Renesas Electronics.
6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respectto the maximumrating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability ofits products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further,Renesas Electronics productsare notsubject to radiation resistance design. Please be sure to implement safetymeasures to guard them againstthe
possibility ofphysical injury,and injury or damage caused byfire in the event ofthe failure of a Renesas Electronics product,such as safety design for hardware and software including but not limited to
redundancy,fire control and malfunction prevention, appropriate treatment for aging degradation or any otherappropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety ofthe final products or systems manufactured by you.
8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility ofeach Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations thatregulate the inclusion or use of controlled substances,including withoutlimitation, the EU RoHS Directive. Renesas Electronics assumes
no liability fordamages or losses occurring as a result ofyour noncompliance with applicable laws and regulations.
9. Renesas Electronics products and technology may notbe used for or incorporated into any products or systems whose manufacture, use,or sale is prohibited under any applicable domestic or foreign laws or
regulations. You should not use Renesas Electronics products or technology described in this documentfor any purpose relating to military applications or use by the military, including but not limited to the
development ofweapons ofmass destruction. When exporting the Renesas Electronics productsor technology described in this document, you should comply with the applicable exportcontrol laws and
regulations and follow the procedures required by such laws and regulations.
10. Itis the responsibility ofthe buyer ordistributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party,to notify such third party in advance of the
contents and conditions set forth in this document, Renesas Electronics assumes no responsibility forany losses incurred by you orthird parties as a result of unauthorized use of Renesas Electronics
products.
11. This document may not be reproduced orduplicated in any form, in whole or in part,without prior written consent ofRenesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document orRenesas Electronics products, orif you have any otherinquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
http://www.renesas.com
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics America Inc.
2801 Scott Boulevard Santa Clara, CA 95050-2549, U.S.A.
Tel: [phone], Fax: [phone]
Renesas Electronics Canada Limited
1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada
Tel: [phone], Fax: [phone]
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: [phone], Fax: [phone]
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: [phone], Fax: [phone]
Renesas Electronics (China) Co., Ltd.
Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China
Tel: [phone], Fax: [phone]
Renesas Electronics (Shanghai) Co., Ltd.
Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333
Tel: [phone], Fax: [phone]
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: [phone], Fax: [phone]
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan
Tel: [phone], Fax: [phone]
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: [phone], Fax: [phone]
Renesas Electronics Malaysia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: [phone], Fax: [phone]
Renesas Electronics Korea Co., Ltd.
12F., 234 Teheran-ro, Gangnam-Ku, Seoul, 135-920, Korea
Tel: [phone], Fax: [phone]
SALES OFFICES
© 2014 Renesas Electronics Corporation. All rights reserved.
Colophon 4.0
© 2014 Renesas Electronics Corporation and Renesas Solutions Corp.
Colophon 4.0
Renesas Tools Website http://www.renesas.com/tools
All trademarks and registered trademarks are the property
of their respective owners.
If the requirements shown in the "CAUTION"
sentences are ignored,
the equipment may cause
personal injury or damage to the products.