Renesas SLG46621V User manual

SLG46621V GreenPAK DIP Adapter
Quick Start Guide
Revision 1.1
18-Mar-2022
1 of 1
© 2022 Renesas Electronics Corporation
1. Description
The GreenPAK DIP Adapter is a smallPCB that lets youadapt
STQFN packages into a DIP footprint. This board can speed
up your design prototyping and testing. This small board
0.43x1.03 inch uses 20 pins DIP footprint with 0.3 inch width.
You can also use this adapter for prototyping by making
STQFN package compatible with solder free breadboards.
2. Features
•Low cost
•Simplifies prototyping of SMT IC’s
•Optional VDD LED indicator
•Decoupling capacitor included
Note 1 All sizes in inches.
3. Top View
PIN1 (VDD1) PIN20 (GPIO)
PIN2 (GPI)
PIN3 (GPIO)
PIN4 (GPIO)
PIN5 (GPIO)
PIN6 (GPIO)
PIN7 (GPIO)
PIN8 (GPIO)
PIN9 (GPIO)
PIN10 (GPIO)
PIN19 (GPIO)
PIN18 (GPIO)
PIN17 (GPIO)
PIN16 (GPIO)
PIN15 (GPIO)
PIN14 (VDD2)
PIN13 (GPIO)
PIN12 (GPIO)
PIN11 (GND)
VDD1 Chip decoupling capacitor
LED current limit resistor (optional) Chip package type
VDD LED indicator (optional)
Chip part number
GreenPAK chip
Pins Pins
4. Bottom View
PIN20 (GPIO)
PIN19 (GPIO)
PIN18 (GPIO)
PIN17 (GPIO)
PIN16 (GPIO)
PIN15 (GPIO)
PIN14 (VDD2)
PIN13 (GPIO)
PIN12 (GPIO)
PIN11 (GND)
Pins
PIN1 (VDD1)
PIN5 (GPIO)
PIN6 (GPIO)
PIN7 (GPIO)
PIN2 (GPI)
PIN10 (GPIO)
PIN8 (GPIO
PIN9 (GPIO)
PIN3 (GPIO)
PIN4 (GPIO)
Pins
Chip pin number
VDD2 Chip decoupling capacitor
(optional)
5. Board Schematic

Corporate Headquarters
TOYOSU FORESIA, 3-2-24 Toyosu,
Koto-ku, Tokyo 135-0061, Japan
www.renesas.com
Contact Information
For further information on a product, technology, the most
up-to-date version of a document, or your nearest sales
office, please visit:
www.renesas.com/contact/
Trademarks
Renesas and the Renesas logo are trademarks of Renesas
Electronics Corporation. All trademarks and registered
trademarks are the property of their respective owners.
IMPORTANT NOTICE AND DISCLAIMER
RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL
SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING
REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND
OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible
for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3)
ensuring your application meets applicable standards, and any other safety, security, or other requirements. These
resources are subject to change without notice. Renesas grants you permission to use these resources only for
development of an application that uses Renesas products. Other reproduction or use of these resources is strictly
prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property.
Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims,
damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject
to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources
expands or otherwise alters any applicable warranties or warranty disclaimers for these products.
(Rev.1.0 Mar 2020)
© 2021 Renesas Electronics Corporation. All rights reserved.