Renesas HA17458 Series User manual

Rev.1.00 Jun 15, 2005 page 1 of 8
HA17458 Series
Dual Operational Amplifier REJ03D0680-0100
(Previous: ADE-204-040)
Rev.1.00
Jun 15, 2005
Description
HA17458 is dual operational amplifiers which provides internal phase compensation and high performance. It can be
applied widely to measuring control equipment and to general use.
Features
•High voltage gain: 100dB (Typ)
•Wide output amplitude: ±13V (Typ) [at RL≥2kΩ]
•Protected from output shortcircuit
•Internal phase compensation
Ordering Information
Type No. Application Package Code (Previous Code)
HA17485FP Industrial use PRSP0008DE-B (FP-8DGV)
HA17458F Commercial use PRSP0008DE-B (FP-8DGV)
HA17458 Commercial use PRDP0008AF-A (DP-8B)
HA17458PS Industrial use PRDP0008AF-A (DP-8B)

HA17458 Series
Rev.1.00 Jun 15, 2005 page 2 of 8
Pin Arrangement
1
2
3
4
8
7
6
5
Vout1
Vin(−)1
Vin(+)1
VEE
VCC
Vout2
Vin(−)2
Vin(+)2
(Top View)
−++−
12
Circuit Schematic (1/2)
to V
CC
Vin(+)
Vin(−)
to V
EE
to V
CC
V
CC
V
EE
Vout

HA17458 Series
Rev.1.00 Jun 15, 2005 page 3 of 8
Absolute Maximum Ratings
(Ta = 25°C)
Ratings
Item Symbol
HA17458 HA17458PS HA17458F HA17458FP Unit
Supply voltage VCC +18 +18 +18 +18 V
V
EE –18 –18 –18 –18 V
Intput voltage VIN*3±15 ±15 ±15 ±15 V
Differential input voltage VIN(diff) ±30 ±30 ±30 ±30 V
Power dissipation PT670*1670*1385*2385*2mW
Operating temperature Topr –20 to +75 –20 to +75 –20 to +75 –20 to +75 °C
Storage temperature Tstg –55 to +125 –55 to +125 –55 to +125 –55 to +125 °C
Notes: 1. These are the allowable values up to Ta = 45 °C. Derate by 8.3mW/°C above that temperature.
2. These are the allowable values up to Ta = 31 °C mounting on 30% wiring density glass epoxy board. Derate
by 7.14mW/°C above that temperature.
3. If the supply voltage is less than ±15V, input voltage should be less than supply voltage.
Electrical Characteristics 1
(VCC = –VEE = 15V, Ta = 25°C)
Item Symbol Min Typ Max Unit Test conditions
Input offset voltage VIO — 2.0 6.0 mV RS≤10kΩ
Input offset current IIO — 6 200 nA
Input bias current IIB — 30 500 nA
Line regulation ∆VIO/∆VCC — 30 150 µV/V RS≤10kΩ
∆VIO/∆VEE — 30 150 µV/V RS≤10kΩ
Voltage gain AVD 86 100 — dB RL≥2kΩ, Vout = ±10V
Common mode rejection ratio CMR 70 90 — dB RS≤10kΩ
Common mode input voltage range VCM ±12 ±13 — V
Peak-to-peak output voltage Vop-p ±12 ±14 — V RL= 10kΩ
Power dissipation Pd— 90 200 mW No load, 2 channel
Slew rate SR — 0.6 — V/µs AVD = 1
Input resistance Rin 0.3 1.0 — MΩ
Input capacitance Cin — 6.0 — pF
Output resistance Rout — 75 — Ω
Electrical Characteristics 2
(VCC = –VEE = 15V, Ta = –20 to +75°C)
Item Symbol Min Typ Max Unit Test conditions
Input offset voltage VIO — — 9.0 mV RS≤10kΩ
Input offset current IIO — — 400 nA
Input bias current IIB — — 1100 nA
Voltage gain AVD 80 — — dB RL≥2kΩ, Vout = ±10V
Peak-to-peak output voltage Vop-p ±10 ±13 — V RL= 2kΩ

HA17458 Series
Rev.1.00 Jun 15, 2005 page 4 of 8
Characteristic Curves
Input Offset Voltage
vs. Ambient Temperature
5
4
3
2
1
0
Input Offset Voltage VIO (mV)
−200 20406080
Ambient Temperature Ta (°C)
VCC = + 15 V
VEE = −15 V
RS10 kΩ
<
=
Input Bias Current
vs. Ambient Temperature
100
−20 Ambient Temperature Ta (°C)
80
60
40
20
0
Input Bias Current IIB (nA)
020406080
VCC = + 15 V
VEE = −15 V
Input Offset Current
vs. Ambient Temperature
20
Input Offset Current IIO (nA)
−20 Ambient Temperature Ta (°C)
16
12
8
4
00 20406080
VCC = + 15 V
VEE = −15 V
Power Dissipation
vs. Ambient Temperature
200
−20 Ambient Temperature Ta (°C)
Power Dissipation Pd (mW)
0 20406080
100
0
VCC = + 15 V
VEE = −15 V
No Load
Both Amplifiers

HA17458 Series
Rev.1.00 Jun 15, 2005 page 5 of 8
Voltage Gain
vs. Ambient Temperature
120
− 20 Ambient Temperature Ta (
° C)
110
100
90
80
70
Voltage Gain A
VD
(dB)
0 20406080
VCC = + 15 V
VEE = −15 V
RL= 2 kΩ
Output Short Current
vs. Ambient Temperature
50
Output Short Current IOS (mA)
−20 Ambient Temperature Ta (°C)
40
30
20
10
00 20406080
VCC = + 15 V
VEE = −15 V
VOP-P = 0 V
Source
Sink
Ta = 25°C
No Load
Both Amplifiers
Power Dissipation
vs. Supply Voltage
Power Dissipation Pd (mW)
Supply Voltage VCC, VEE (V)
200
150
100
50
0±3 ±6 ±9 ±12 ±15 ±18
Maximum Output Voltage Swing
vs. Supply Voltage
Ta = 25°C
RL= 2 kΩ
Maximum Output Voltage Swing VOP-P (V)
Supply Voltage VCC, VEE (V)
20
16
12
8
4
0±3 ±6 ±9 ±12 ±15 ±18
+V
OP-P
ÐV
OP-P

HA17458 Series
Rev.1.00 Jun 15, 2005 page 6 of 8
Voltage Gain vs. Frequency
Voltage Gain AVD (dB)
120
100
80
60
40
20
0
VCC = +15 V
VEE = −15 V
Ta = 25°C
RL= 2 kΩ
10 30 100 300 1 k 3 k 10 k 30 k 100 k 300 k 1M
Frequency (Hz)
Phase Angle vs. Frequency
Phase Angle (deg)
Frequency (Hz)
100 300 1 k 3 k 10 k 30 k 100 k 300 k 1 M 3 M
0
−40
−80
−120
−160
VCC = +15 V
VEE = −15 V
Ta = 25°C
RL= 2 kΩ

HA17458 Series
Rev.1.00 Jun 15, 2005 page 7 of 8
28
24
20
16
12
8
4
0
100 1k 10k 100k500 5k 50k 500k
VCC = +15 V
VEE = −15 V
Ta = 25°C
RL= 10 kΩ
Maximum Output Voltage Swing
vs. Frequency
Maximum Output Voltage Swing Vop-p (V)
Frequency f (Hz)
16
12
8
4
0
−4
−8
−12
−16
200 1k 10k500 5k
VCC = +15 V
VEE = −15 V
Ta = 25°C
Maximum Output Voltage Swing
vs. Load Resistance
Maximum Output Voltage Swing Vop-p (V)
Load Resistance RL(Ω)
Voltage Follower Large
Signal Pulse Response
10
0
−10 0 20406080
Input and Output Voltage (V)
Time (µs)
Output
Input
VCC = +15 V
VEE = −15 V
RL= 2 kΩ
CL= 100 pF
Ta = 25°C

HA17458 Series
Rev.1.00 Jun 15, 2005 page 8 of 8
Package Dimensions
7.62
DP-8B
RENESAS CodeJEITA Package Code Previous Code
MaxNomMin
Dimension in Millimeters
Symbol
Reference
9.6
6.3
5.06
MASS[Typ.]
0.51g
A
Z
b
D
E
A
b
c
θ
e
L
1
1
p
3
e
0.5
0.58
1.3
0.20 0.25 0.35
2.29 2.54 2.79
0
° 15 °
PRDP0008AF-AP-DIP8-6.3x9.6-2.54
10.6
7.4
0.38 0.48
1.27
2.54
1
p
1
3
14
85
0.89
c
Z
e
LA
A
b
b
E
D
e
θ
PRSP0008DE-BP-SOP8-4.4x4.85-1.27
A
L
e
c
b
D
E
A
b
c
θ
x
y
H
Z
L
2
1
1
E
1
MASS[Typ.]
0.1g
4.85
1.05
0.12
0
° 8 °
6.5
0.15 0.20 0.25
0.45
0.00 0.1 0.20
4.4
0.42 0.60 0.85
2.03
Reference
Symbol
Dimension in Millimeters
Min Nom Max
Previous CodeJEITA Package Code RENESAS Code FP-8DGV
5.25
1
A
p
0.35 0.4
6.756.35
1.27
0.15
0.75
58
4
F
*1
*2
*3p
Mx
y
1
Index mark
E
A
Zb
E
H
D
p
Terminal cross section
( Ni/Pd/Au plating )
c
b
1
1
Detail F
A
L
L
θ
NOTE)
1. DIMENSIONS"*1 (Nom)"AND"*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION"*3"DOES NOT
INCLUDE TRIM OFFSET.
e

Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits,
(ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
http://www.renesas.com
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> [phone], Fax: <1> [phone]
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
RENESAS SALES OFFICES
© 2005. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon 2.0