Republic Design House Laurin Daybed User manual

Laurin Daybed Assembly Instructions
R Depublic esign ouseH

NOTE: Unbox and place all parts on a clean and smooth surface (rug, carpet) to
avoid the parts from being scratched.
NOTE: Follow assembly instructions step by step.
NOTE: This bed comes in 3 boxes .
R Depublic esign ouseH
Laurin Daybed Assembly Instructions

PART LIST:
1 Back 1pc 3 Drawer Units 1pc
R Depublic esign ouseH
2 Arms 2pcs
Platform Drawer Bed Assembly Instructions
4 Siderail 1pc Inside Deck Board 2pcs
D1 D2
4
D3
5D6
Assembly
Video Available
www.republicdesignhouse.com
Connecting Rod 4pcs

R Depublic esign ouseH
Platform Drawer Bed Assembly Instructions
7 Legs 4pcs Support Legs 5pcs
78
HARDWARE LIST:
LABEL PICTURE DESCRIPTION QTY LABEL PICTURE DESCRIPTION QTY
4 SMALL BOLT
ALLEN
WRENCH
1 SML FLAT
WASHER 4
B
CAA
AD
PART LIST:
LONG BOLT
ALLEN
WRENCH
B
B E LRG FLAT
WASHER 6 LOCK
WASHER 6
AF
MEDIUM BOLT
G
8
6

R Depublic esign ouseH
using the A- long bolts
and D- washers.
(See below diagram)
STEP 2: Next, screw on the 8- support
legs to the underside of each
drawer unit, 5 legs per unit
(see diagram)
8
8
8
3
8
8
4
7
BAD
2
Laurin Daybed Assembly Instructions
of both the upholstered arms
STEP 1: Attach the 4 legs to the bottom

From there attach the left and right arms using G-bolts ,E- flat washer and F-lock washer.
3
4
B
C
R Depublic esign ouseH
STEP 3: After the support legs are securely fastened, place a side rail, face down,
on a clean surface, then carefully place a drawer unit, face down, in
the opening of the side rail, aligning the attachment holes. Using the C-small
bolts and allen wrench, attach the drawer unit to the side rail.
(See below diagram)
5
www.republicdesignhouse.com
1
BGFE
2
2
2
1
S
(See below diagram)
Laurin Daybed Assembly Instructions
TEP 4:Remove the velcro corner on both sides of the top of the back,exposing the attachment holes.
Assebly

R Depublic esign ouseH
FIG.1
attachment
bolts
Hooks
1
2
6
Assembly
Video Available
www.republicdesignhouse.com
(standing on the support legs), attach the left arm and right arm using the hook
attachments (please note: the attachment bolts on either end of the left arm
and right arm can be loosened and tightened with the allen wrench FIG.1).
Loosen the attachment bolts enough to fit the hooks in (FIG.1),aligning the
side rails to the left arm and right arm, once all hooks are in place,tighten
the attachment bolts, securing the two corners of the bed.
(See below diagram)
3
Laurin Daybed Assembly Instructions
STEP 5: After both arms have been attached to the back, place the drawer unit upright

STEP 6: Once the two corners are
securely tightened and
and back in the middle with the 4-
connecting rods. (see diagram)
R Depublic esign ouseH
2
2
1
4
7
Assembly
Video Available
www.republicdesignhouse.com
3
6
6
66
6
5
5
Laurin Daybed Assembly Instructions
connected, link drawer unit
your bed is complete!
STEP 7: Lay the deck boards atop the bed,