Revolv JARVIS1 User manual
REVOLV INC. HUB
Version B
PRODUCT REQUIREMENTS
• Smart phone running iOS . or greater.
• DSL/cable modem, or LAN-based, high-speed Internet con-
nection.
• WiFi access point.
• If you currently have a cable or DSL modem connected directly
to your computer, you should install a WiFi router between your
modem and your computer to share the Internet connection
with the and other devices. If you do not have a router, you
should purchase and install one before proceeding.
IMPORTANT SAFETY INFORMATION
• Read, keep, heed and follow all instructions.
• Warning: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. Do not use this appa-
ratus near water or in wet locations. e.g. bathrooms or outdoors.
• Clean only with dry soft cloth. Household cleaners or solvents
can damage the finish.
• Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus that produce heat.
• Protect the power cable from being walked on or pinched, par-
ticularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
• Only use attachments/accessories specified by the manufac-
turer.
• Unplug this apparatus during lightning storms or when unused
for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cable or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
• The plug should be readily available to disconnect the equip-
ment.
• Do not expose apparatus to dripping or splashing and do not
place objects filled with liquids, such as vases, on the apparatus.
• This device is not as a toy for usage by children.
• This device is not for use in safety-critical applications (such as
life support) where a failure of the product would reasonably be
expected to cause severe personal injury or death.
SETUP AND INSTALLATION GUIDE
• Place the Hub in a central location to achieve the best wireless
coverage for the entire home.
• Plug the power adaptor into the Hub and a wall socket.
• Download the smart phone application from the Apple App
Store.
• Follow App’s on-screen instructions.
TROUBLESHOOTING GUIDE
Please go to help.revolv.com to learn more about troubleshooting
the Hub.
POWER SPECIFICATION
.V DC .A.
Use only the supplied and approved power supply.
WIRELESS SPECIFICATION
Wireless RF mode frequency bands
. MHz
MHz
. . MHz
ENVIRONMENTAL SPECIFICATION
Operation temperature: C to C
Storage temperature: C to C
Relative humidity: to non-condensing
RECYCLING INFORMATION
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. Instead please de-
liver it to the applicable collection point for the recycling of electrical
and electronic equipment. By recycling this product correctly, you
will help conserve natural resources and prevent potential negative
environmental consequences. For more detailed information about
recycling of this product, please contact your local city oce, your
household waste disposal service or the shop where you purchased
the product.
REGULATORY INFORMATION
Any changes or modifications not expressly approved by the manu-
facturer may void the user’s authority to operate the equipment under
FCC rules.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any inter-
ference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC’s and IC’s RF radiation exposure
limits set forth for an uncontrolled environment under the following
conditions:
• This equipment should be installed and operated such that a
minimum separation distance of 20 cm is maintained between
the radiator (antenna) & user’s/nearby person’s body at all
times.
• This transmitter must not be co-located or operating in con-
junction with any other antenna or transmitter.
This manual suits for next models
1
Table of contents
