RHINO 7600A User manual

© 2005Alamo Group Inc.
RHINO®
1020 S. SangamonAve.
Gibson City, IL60936
800-446-5158
Email: [email protected]
PART'S MANUAL
An Operator's Manual was shipped with the equipment in the
Manual Canister. This Operator's Manual is an integral part of
the safe operation of this machine and must be maintained
with the unit at all times. READ, UNDERSTAND, and FOLLOW
the Safety and Operation Instructions contained in this manual
before operating the equipment. If the Operator's Manual is
not with the equipment, contact your dealer or Servis-Rhino
(800-446-5158) to obtain a Free copy before operating the
equipment.
7600A
Snow Blower
Pub 06-05
Part No. 5047P

TO THE OWNER/OPERATOR/DEALER
Allimplementswithmovingpartsare potentiallyhazardous. Thereisno substituteforacautious, safe-mindedoperatorwho
recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to
be used with all its safety equipment properly attached to minimize the chance of accidents.
BEFOREYOUSTART!! Read the safety messages on the implement and shown in your manual.
Observe the rules of safety and common sense!
WARRANTY INFORMATION:
Readand understand the complete Warranty Statementfound inthis Manual. Fill outthe WarrantyRegistration Form
in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card
andontheWarrantyFormthatyouretain.Theuseof"will-fit"partswillvoidyourwarrantyandcancausecatastrophic
failure with possible injury or death.

PARTS
SECTION
Parts Section – 1

Parts Section – 2
©2005 Alamo Group Inc.
Formaximumsafetyandtoguaranteeoptimumproductreliability,alwaysuse
genuineServis-RhinoParts. Theuseofinferiorreplacementpartsmaycause
prematureorcatastrophicfailurewhichcouldresultinseriousinjuryordeath.
Directanyquestionsregardingparts to:
Thefollowinginstructionsareofferedtohelpeliminateneedlessdelayanderrorinprocessing
purchaseordersfor the equipmentinthissection.
1. ThePartsSectionispreparedinlogicalsequenceandgroupingofpartsthatbelongtothe
basic machine featured in this manual. Part Numbers and Descriptions are given to help
locatethepartsand quantities required.
2. The Purchase Order must include the name and address of the person or organization
orderingtheparts,whoshouldbecharged,andifpossible,theserialnumberofthemachine
forwhichtheparts are ordered.
3. ThePurchaseOrdermustclearlylistthequantityofeachpart,thecompleteandcorrectpart
number (be sure to include all periods), and the basic name of the part.
4. TheManufacturerreservestherighttosubstitutepartswhereapplicable.
5. Somepartsareunlisteditemswhicharespecialproductionitemsnotnormallystockedand
are subject to special handling. Request a quotation for such parts before sending a
PurchaseOrder.
6. TheManufacturer reservestherighttochangepriceswithoutpriornotice.
NOTE: PleaserefertoTheSafetySectioninthefrontof this Manual for the proper
PartNumberwhenorderingReplacementSafetyDecals.
PARTS ORDERING GUIDE
RHINO®
1020 S. Sangamon Ave.
Gibson City, IL 60936
800-446-5158
Email: [email protected]

PART NAME INDEX
CABLE ASSEMBLY................................................................................................................................................................ 6
CATEGORY 2 & 3 QUICK HITCH ASSEMBLY................................................................................................................... 13
CATEGORY 2 QUICK HITCH ASSEMBLY.......................................................................................................................... 11
CHAIN IDLER ASSEMBLY..................................................................................................................................................... 9
DRIVELINE ASSEMBLY (OPTIONAL) - 00784015 ............................................................................................................. 16
DRIVELINE ASSEMBLY (OPTIONAL) - 00784016 ............................................................................................................. 17
FAN DRIVE ASSEMBLY........................................................................................................................................................ 4
HYDRAULIC CYLINDER & HOSE KIT (OPTIONAL)........................................................................................................... 15
INTERNAL DRIVE ASSEMBLY.............................................................................................................................................. 8
OIL TANK PARTS .................................................................................................................................................................. 7
STANDARD CATEGORY 2 & 3 WITHOUT QUICK HITCH ASSEMBLY............................................................................ 12
STANDARD CATEGORY 3 HITCH WITHOUT QUICK HITCH ASSEMBLY....................................................................... 14
3-POINT HITCH ASSEMBLY............................................................................................................................................... 10
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 3

FAN DRIVE ASSEMBLY
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 4

FAN DRIVE ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
1 00784674 1 FAN -CW
2 00784695 4 INNER BUSHING
3 00783596 2 1 15/16" BEARING, FLANGED
4 00783720 2 SPROCKET
5 00783737 2 # 80 ROLLER CHAIN
6 7D5118 1 CONNECTOR LINK #80
7 00783051 2 FAN SHAFT
8 00783105 2 CAP
9 00784547 2 SHEAR BOLT
10 00001200 4 1/2-UNC NUT
11 00035900 4 HHCS 5/16-18UNC 3/4 PL5
12 00011700 4 LOCKWASHER 5/16 PL STD
13 00001200 16 NUT,HEX 1/2 NC PL
14 00725073 2 SQ KEY, 1/2 X 2-1/2
15 00784702 2 SPACER, FAN UHMW
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 5

CABLE ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
1 00992000 35 CABLE, 1/4 X 35 -1/2FT
1/2’
2 60042 6 WIRE ROPE CLAMP 1/4
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 6

OIL TANK PARTS
ITEM PART NO. QTY. DESCRIPTION
1 00783029 1 COVER, CHAIN CASE
2 00783037 1 DIPSTICK
3 00011400 6 HHCS 3/8 NC 1 PL5
4 00784028 1 1" MAGNETIC DRAIN PLUG
5 00783692 14’ 3/8" X 1" OIL BATH SEALER 15’
6 03101646 6 LOCKWASHER,3/8,MEDIUM-ZP
7 00011100 6 FLATWASHER 3/8 PL STD
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 7

INTERNAL DRIVE ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
1 00783050 1 DRIVE SHAFT
2 00783596 5 FLANGE BEARING 1-5/16"
3 00783720 4 SPROCKET X 21 TOOTH
4 00783598 1 PILLOW BLOCK BEARING, 1-5/16"
5 00750952 2 HEXB,5/8NC X 2-1/2,ZP,GRD5
6 00001400 2 FLATWASHER 5/8 PL STD
7 33007C 4 HEX NUT 5/8-11
8 00001200 40 NUT,HEX 1/2 NC PL
9 40662.75 2 KEY, 1/2 X 1/2 X 2-1/4
10 00784566 1 SHIELD, SAFETY DRIVE
11 00784565 1 PLATE, REINFORCEMENT
12 00002700 4 FLATWASHER 1/2 PL
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 8

CHAIN IDLER ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
1 00784038 2 BOLT, CHAIN IDLER
2 00002701 8 FLATWASHER,3/4,TYPE AW,ZP
3 6D5557 2 3/4 SET COLLAR
4 1436356 2 IDLER SPROCKET
5 03100104 2 FLATWASHER 3/4 X 1-1/4 X 14GA
6 00000200 4 NUT 3/4 NC HEX PL
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 9

3-POINT HITCH ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
1 00784030 1 UPPER 3PT HITCH PIN
2 00784031 2 LOWER CAT III HITCH PIN
3 00784032 2 LOWER CAT II HITCH PIN
4 00784033 1 BUSHING, UPPER HITCH PIN
5 00784034 2 BUSHING, LOWER INNER HITCH PIN
6 00784035 2 BUSHING, LOWER OUTER HITCH PIN
7 0838404 5 KLICK PIN 7/16 X 2
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 10

CATEGORY 2 QUICK HITCH ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
1 00784030 1 UPPER 3PT HITCH PIN
2 00784031 2 LOWER CAT III HITCH PIN
3 00784033 1 BUSHING, UPPER HITCH PIN
4 0838404 3 KLICK PIN 7/16 X 2
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 11

STANDARD CATEGORY 2 & 3 WITHOUT QUICK HITCH ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
1 00784030 1 UPPER 3PT HITCH PIN
2 00784032 2 LOWER CAT II HITCH PIN
3 00784034 2 BUSHING, LOWER INNER HITCH PIN
4 00784035 2 BUSHING, LOWER OUTER HITCH PIN
5 0838404 3 KLICK PIN 7/16 X 2
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 12

CATEGORY 2 & 3 QUICK HITCH ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
1 00784030 1 UPPER 3PT HITCH PIN
2 00784031 2 LOWER CAT III HITCH PIN
3 00784033 1 BUSHING, UPPER HITCH PIN
4 0838404 3 KLICK PIN 7/16 X 2
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 13

STANDARD CATEGORY 3 HITCH WITHOUT QUICK HITCH ASSEMBLY
ITEM PART NO. QTY. DESCRIPTION
1 00784030 1 UPPER 3PT HITCH PIN
2 00784031 2 CAT III HITCH PIN
3 00784033 1 BUSHING, UPPER HITCH PIN
4 00784035 2 BUSHING, LOWER OUTER HITCH PIN
5 0838404 3 KLICK PIN 7/16 X 2
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 14

HYDRAULIC CYLINDER & HOSE KIT (OPTIONAL)
ITEM PART NO. QTY. DESCRIPTION
2457104 1 CYLINDER,HYDRAULIC 3 X 8
1 2417158 1 CAP,CYLINDER CLEVIS
2 2417157 1 CAP,CYLINDER ROD
3 2417160 1 PISTON,CYLINDER
4 00774737 1 ROD CYL 1.25-08-1.00-1.25-A
5 00774748 1 TUBE CYL 3.00-08.00
6 00774742 4 TIE ROD 1/2-08
7 3047104 2 PIN, 1
8 492110 4 HAIRPIN CLIP 7/8
10 ----------- 4 END CAP O-RING
11 ----------- 1 ROD WIPER SEAL
13 ----------- 1 ROD DUST SEAL
14 ----------- 1 PISTON SEAL
15 ----------- 2 PISTON WEAR RING
16 3047117 1 THREAD LOCK
17 1917140 1 ROD CLEVIS
18 0116000 1 SHSS 3/8 NC 1/2
20 33005H5C 8 NUT,HEX 1/2-13 UNC GR.5 PLT
25 5JRC16140 1 LOCKNUT 1 -14 TLDT GC ZP
27 1917132 1 SCKT HD O-RNG PLUG,3/4-16 UNF,
40 ---------- 2 END CAP BACKUP WASHERS
41 1937156 1* ADAPTER, ELBOW-W/RESTRICTOR -8MB -6MJ
42 03200588 1* ADAPTER, ELBOW- 8MB -6MJ
43 00784528 2* ASY, HOSE # 6 X 120 LG.
44 02975530 1* SEAL KIT (NOT SHOWN)
* 00784087 INCLUDED IN HOSE KIT
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 15

DRIVELINE ASSEMBLY (OPTIONAL) - 00784015
ITEM PART NO. QTY. DESCRIPTION
1 2716820 1 REPAIR KIT-SAFETY SLIDE LOCK Y
2 0136416 1 SLIDE LOCK YOKE-1 3/8-21 SPL,5
3 W507 2 CTR CROSS KIT
4 00784049 1 YOKE & SHAFT
5 00780376 2 NYLON BEARING & KEEPER
6 00756005 1 DECAL-ROTATING DRIVELINE
9 00756004 1 DECAL-SHIELD MISSING
10 00784050 1 YOKE, TUBE & SLIP SLEEVE
11 00784051 1 YOKE
12 00784046 1 SET, SHIELD GUARD
13 00784047 1 ASY, JOINT & TUBE 1/2 W/ GUARD (NOT SHOWN)
14 00784048 1 ASY, JOINT & SHAFT 1/2 W/ GUARD (NOT SHOWN)
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 16

DRIVELINE ASSEMBLY (OPTIONAL) - 00784016
ITEM PART NO. QTY. DESCRIPTION
1 00724738 1 KIT-SLIDE COLLAR REPAIR
2 00725126 1 YOKE SLIDE LOCK 1-3/4-20 SPL.
3 W507 2 CTR CROSS KIT
4 00784049 1 YOKE & SHAFT
5 00780376 2 NYLON BEARING & KEEPER
6 00756005 1 DECAL-ROTATING DRIVELINE
9 00756004 1 DECAL-SHIELD MISSING (NOT SHOWN)
10 00784050 1 YOKE, TUBE & SLIP SLEEVE
11 00784051 1 YOKE
12 00784046 1 SET, SHIELD GUARD (NOT SHOWN)
13 00784047 1 ASY, JOINT & TUBE 1/2 W/ GUARD (NOT SHOWN)
14 00784052 1 ASY, JOINT & SHAFT 1/2 W/ GUARD (NOT SHOWN)
7600A Snowblower (June-05) -Current
©2005 Alamo Group Inc. Parts Section – 17