Riello LMV3 User manual

0214190 - 01/2022
Code Model
Multi-Function Burner Display
Burner control
Installation, use and instructionsInstallation, use and instructions
20179829 MFBD 7" TOUCHSCREEN KIT - LMV5
20167984 MFBD 4.3" TOUCHSCREEN KIT - LMV5
20107665 MFBD 4.3" TOUCHSCREEN KIT - LMV3

10214190 - 01/2022
Index
Multi-Function Burner Display
1 Information And General Warnings 3
1.1 General Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
1.2 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
1.3 Other Relevant Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2  SystemAndHardwareConguration 4
2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2.2 Burner Touchscreen Kits Bom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2.2.1 4.3" Touch Screen Kit (Lmv3) - 20107665. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2.2.2 4.3" Touch Screen Kit (Lmv5) - 20167984. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2.2.3 7" Touch Screen Kit (Lmv5) - 201798294 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.2.4 Optional Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.3 Factory Integrated Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2.4 Standard Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2.5 Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.5.1 Touch Screen Communication For Burner Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.5.2 External Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.6 System Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.6.1 Solo & Piccolo System Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.6.1 Solo - Lmv3/5 Burner 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.6.2 Piccolo Burner 1- Burner 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.6.3 Massimo System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.6.3 Burner 1, Burner 2, Burner 3 And Burner 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.6.3 Massimo Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.7 Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
2.7.1 Solo Wiring: Lmv3x, 4.3" Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
2.7.2 Solo Wiring: Lmv5x, 4.3"/ 7" Touchscreen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
2.7.3 Piccolo Wiring: Lmv3x, 4.3" Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
2.7.3 Piccolo Wiring: Lmv5x, 4.3"/7" Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
2.7.4 Massimo Wiring: Lmv5x, 4.3" Touchscreen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
2.7.5 Massimo Wiring: Lmv5x, 7" Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
3 User Interface 13
3.1 Burner View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
3.2 Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
3.3 Burner Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
3.4 SystemConguration(MainMenu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
3.5 Media/ Units Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
3.6 InputsInfoAndConguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
3.7 Remote Setpoint Source & Remote Modulation Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
3.8 HotStandbyConguration&ColdStartConguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
3.9 Pump/ValveConguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3.10 Night Setback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
3.11 EthernetConguration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
3.12 CommsCong. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
3.13 General Setup Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
3.14 System Setup Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
3.15 Alarms & Warnings Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
3.16 Burner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

2
0214190 - 01/2022
Index
4  SettingUpControlMode 22
4.1 Setting Up Solo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4.2 Setting Up Piccolo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Step 1: Selecting Piccolo Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Step 2: Selecting Boiler Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
 Step3:PiccoloCongurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Step 4: Setting Up Other Burner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.2 Setting Up Massimo Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Step 1: Selecting Massimo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Step 2: Selecting Boiler Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Step 3: Finishing Setup Of The Massimo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5 Remote Monitoring - Vnc Viewer 26
5.1 Hardwire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5.2 Setting Up Vnc Viewer Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6 Multi-Function Display Version Update 27
6.1 Unpacking The Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.2 Burner Hmi Update 27
7 Points List 29
7.1 Panel Points List: Modbus Rtu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7.2 Gateway Point List: Bacnet Ms/Tp, Bacnet/Ip, Modbus Tcp, Metasys N2, Ethernet/Ip, Lonworks . . . . . . . . . . . 30

30214190 - 01/2022
Information and general warnings
Ensure adequate work space before attemptingEnsure adequate work space before attempting
installationinstallation
All accessory kits must be inspected for con-tentsAll accessory kits must be inspected for con-tents
and integrity. If any components appear damagedand integrity. If any components appear damaged
DO NOT attempt installation; contact your supplierDO NOT attempt installation; contact your supplier
After all operations are completed in compliance withAfter all operations are completed in compliance with
these instructions; remount the cover and reconnectthese instructions; remount the cover and reconnect
all safety devices before operatingall safety devices before operating
Failure to follows these instruction could result inFailure to follows these instruction could result in
unsafe operation.unsafe operation.
Installation must only be conducted by qualied andInstallation must only be conducted by qualied and
skilled personnel in compliance with these instruc-skilled personnel in compliance with these instruc-
tions and all local and national codestions and all local and national codes
Disconnect all power supplies before attempting
installation
Please note, this manual is only for burner display control.
See Massimo Boiler Control manual for panel control
system.
The multi-function display for LMV3x/5x is a common
component for 3 systems: Solo, Piccolo and Massimo.
The Solo is a system that provides easy access to
operators and BMS systems and burner functions. The
burner is equipped with high denition 4.3" color HMI
screen, delivering a modern and clean overview of the
system in a snapshot.
The Piccolo is a 2 boiler lead/lag system that only needs
the burners to be equipped with the multi-function displays
and includes many functions already present in Solo.
The Massimo is a full boiler room control system and any
burner equipped with a multi-function display can commu-
nicate with it and participate on the up to 8 boilers lead/lag
system.
1 Information and general warnings
1.1 General warnings
1.2 General information
1.3 Other relevant documents
Massimo Boiler Control System manual (Main control panel
for Massimo).
Please note that in manual contains fhe following legend to
help navigate what functionality is compatible with the 4
modes of control:
The Mulit-Function Burner Display Control is not a safety
control. It does not interfere with any safety limitation set on
the burner and boiler.
This manual may be updated without notice of change.
Massimo
Piccolo
Solo
Remote Modulation

4
0214190 - 01/2022
System and hardware configuration
2.2 Burner touch screen kits BOM
2  Systemandhardwareconguration
The Multi-Function Burner Display is included in kits de-
ned in section 2.2 that can selected as 4.3" or 7" displays
with LMV3 and LMV5 controls.
2.1 Introduction
4.3" kit (20107665) Components list
# Description Part Number
1 DB9 to wire 20143749
2 4.3" touch screen 20180445 - done
3Wire (beldon,white, red
, green, black)
4 Display bracket, 20115121
5 Display bracket 20110020
6120AC/24 VDC power
supply 20138550
7 Din rail C5311121
8OCI412.10 C5360140
9Light and Light button
10 M6 Threaded rivet 20143688
2.2.1 4.3"touchscreenkit(LMV3)-20107665
7" kit (20167984) Components list
# Description Part Number
1 DB9 to wire 20143749
2 4.3" touch screen 20138548
3Wire (beldon,white, red
, green, black)
4 Display bracket, 20115121
5 Display bracket 20110020
6120AC/24 VDC power
supply 20138550
7 Din rail C5311121
8OCI412.10 C5360140
9Light and Light button
10 M6 Threaded rivet 20143688
11 RJ45 - RJ12 cable 20146748
12 PLC: CO-11ARE-D 20138547
2.2.2 4.3"touchscreenkit(LMV5)-20167984
Massimo
Piccolo
Solo

50214190 - 01/2022
System and hardware configuration
Optional parts
9a Gateway (5 protocol) - 1
per 8 burners 20141213
9b Gateway (Lonworks)- 1
per 8 burners 20141214
7" kit (20179829) Components list
# Description Part Number
1 DB9 to wire 20143749
2 7" touch screen 20164159
3Wire (beldon,white, red
, green, black)
4120AC/24 VDC power
supply 20138550
5 Din rail C5311121
6OCI412.10 C5360140
7Light and Light button
8M6 Threaded rivet 20143688
9RJ45 - RJ12 cable 20146748
10 PLC: CO-11ARE-D 20138547
2.2.3 7"touchscreenkit(LMV5)-20179829
2.2.4 Optionalparts
7" kit mounting case kit
# Description Part Number
1
Mounting Case and
components - Only
to be used on larger
power burners. Please
contact local area
representative for more
details.
20076792
Massimo
Piccolo
Solo

6
0214190 - 01/2022
System and hardware configuration
2.3 Factory integrated components
Burner integration kit installed and tested.
►4.3” HMI (LMV3/LMV5)
►7.0” HMI (LMV5)
Protocol gateway (optional)
2.4 Standardfeatures
In order to handle a wide variety of systems, the touch-
screeniscongurable.Pleasenotethatmostofthese
features will not appear in certain modes. The following
option are available:
System output type:
►Steam
►Hot water
Monitoring of burner/boiler & system:
►PV, statuses, ring rate, communication
Setpoint selection:
►Local (selectable/night/weekend setpoint)
►BMS (network/hardwire via analog signal 4-20ma or
0-10Vdc) - note this is not available for Solo or Piccolo LMV5
Night/weekend setback
►Individual days selection
►Individual time and setpoint selection
Hot Standby
►Selectable temperature/pressure target
►Choice of rst lag boiler or all lag boilers
Cold start
►Individual start and stop of setpoint selection
►Maximum time selection
Pumps setup
►Boiler circulator pump o delay
►Boiler isolation valve closed delay
Modbus RTU connection for BMS connection to software
points.
Modbus TCP connection for BMS in Solo mode
Remote viewing
Piccolo
►Start and stop for lag boiler
►Start and stop delay for lag boiler
►Boiler automatic setpoint correction function
►Lead boiler rotation interval
Massimo: Touchscreens congurable to work in conjunction
with Massimo Panel

70214190 - 01/2022
System and hardware configuration
2.6 System overview
2.5 Communication
The burner touchscreen utilizes Modbus/TCP for commu-
nications to 1 other burner (Piccolo option) or to Massimo
panel (Massimo option).
The burner touchscreen utilizes Modbus RTU, RS485 for
communications to the burner controls including LMV3,
temperature controller.
For an LMV5, the AZL module communicates using Mod-For an LMV5, the AZL module communicates using Mod-
bus RTU over RS232.bus RTU over RS232.
For remote connection to Massimo, see Massimo manual.For remote connection to Massimo, see Massimo manual.
2.5.2 External communication
BMS communication is available via Modbus RTU for SoloBMS communication is available via Modbus RTU for Solo
and Piccolo and Modbus TCP from Solo.and Piccolo and Modbus TCP from Solo.
An optional gateway can be included in the burner withAn optional gateway can be included in the burner with
other protocols (BACnet IP or BACnet/MSTP, Modbus TCP,other protocols (BACnet IP or BACnet/MSTP, Modbus TCP,
Ethernet/IP, Metasys N2, Lonworks).Ethernet/IP, Metasys N2, Lonworks).
2.5.1 Touch screen communication for burner control
Points list is protocol dependant, consult section 6.Points list is protocol dependant, consult section 6.
Solo-LMV3/5(2.6.1) Piccolo(2.6.2)
Supply
Temp./
Pressure
PID Control
HMI
Belly
Temp.
Return
Temp.
BMS
Mobus RTU
E-
Remote
Viewer
BMS
Modbus
TCP
Supply
Temp./
Pressure
PID Control
HMI
Belly
Temp.
Return
Temp.
BMS
Mobus RTU
Supply
Temp./
Pressure
PID Control
HMI
Belly
Temp.
Return
Temp.
Burner 1 Burner 1 Burner 2
Header
Temp.
2.6.1 & 2.6.2 Solo & Piccolo system overview
OR OR OR
For LMV5:
►PLC is added to interface between LMV5 and touch-
screen
For LMV5:
►PLC is added to interface between LMV5 and touch-
screen

8
0214190 - 01/2022
System and hardware configuration
Massimo
Supply
Temp./
Pressure
PID Control
HMI
Belly
Temp.
Return
Temp.
Supply
Temp./
Pressure
PID Control
HMI
Belly
Temp.
Return
Temp.
Supply
Temp./
Pressure
PID Control
HMI
Belly
Temp.
Return
Temp.
Supply
Temp./
Pressure
PID Control
HMI
Belly
Temp.
Return
Temp.
Burner 1 Burner 2 Burner 3 Burner4
Massimo Panel
........ up to 8 burners can be connected to the Massimo panel........ up to 8 burners can be connected to the Massimo panel
Modbus TCPModbus TCP
Modbus TCPModbus TCP
Modbus TCPModbus TCPModbus TCPModbus TCP
2.6.3 Massimo system overview
OR OR OR OR

90214190 - 01/2022
System and hardware configuration
2.7 Navigation
BURNER
INFO
ERROR
HISTORY
ALARM &
WARNINGS
PICCO-
LO MODE
LEAD/LAG
LEAD/LAG
CONFIG 2
SYSTEM
OVERVIEW
CONTROL
PAGE
DISPLAY
CONFIG.
COMMS
CONFIG
GENEAL
SETUP
GUIDE
SYSTEM
SETUP
EXAMPLES
REMOTE
MOD.
SOURCE
MEDIA/
UNITS SE-
LECTION
INPUTS
INFO AND
CONFIG
REMOTE
SETPOINT
SOURCE
HOT
STANDBY
CONFIG
PUMP/
VALVE
CONFIG
LEAD/LAG
CONFIG 3
NIGHT
SETBACK
ETHERNET
CONFIG
COLD
START
CONFIG
LEAD/LAG
CONFIG4
LEAD/LAG
CONFIG 1
Please note, some of the above menu options will not bePlease note, some of the above menu options will not be
available in certain modes as they may not apply. See sec-available in certain modes as they may not apply. See sec-
tion 3 for more details.tion 3 for more details.
Lead/LagInfo(PiccoloConguration)
Main Menu