Rigel LU8090 User manual

INSTRUCTION MANUAL
LU8090
Undercounter Lavatory
R
27.07.2022

The instructions contained herein are for the safe and correct use, care and maintenance of the
product, to minimize the risk of injury and damage to yourself, other persons, or property.
Please read the following safety information thoroughly and retain this document for future use
and reference.
IMPORTANT SAFETY, INSTALLATION AND OPERATING INSTRUCTIONS
Please read this manual and ensure that you understand the instructions and procedures stated
within before installing or operating the product.
Rigel products have been designed and tested to be safe and risk-free when installed, operated
and maintained in good working order, in accordance with the instructions and
recommendations found i this document.
There are no user-serviceable parts in this product. Please contact a qualified and licensed
trades person should the product require dismantling and/or repairs.
Supervision should be given to any persons who may have difficulty understanding or operating
the controls of the product. Extra consideration should be given to the young, infirm, elderly, or
any person inexperienced in the correct operation of the product's controls.
While every effort has been made to ensure that the information contained within this document
was accurate and complete at the time of printing, Rigel Technology (S) Pte Ltd shall not be
held responsible for any errors, omissions or inaccuracies. By installing or using the product,
the user agrees that no responsibility for the consequences resulting from any misinformation
shall be incurred on Rigel Technology (S) Pte Ltd. Rigel Technology (S) Pte Ltd reserves the
right to change the specifications and functions of the product described herein at any time
without prior notice.
No part of this guide may be reproduced, stored in a retrieval system, or trans-mitted, in any
form or by any means, electronic, mechanical, recording, or otherwise, without the prior written
permission of Rigel Technology (S) Pte Ltd.
Instructions accompanied by this symbol could lead to death
or serious injury if they are ignored or followed improperly.
IMPORTANT SAFETY INFORMATION
1.
CUSTOMER SUPPORT
VIETNAM
RIGEL TECHNOLOGY (INDOCHINA) LLC | Office & Showroom
Address : No. 207-209 Phan Dang Luu Road, Ward 1, Phu Nhuan District, Ho Chi Minh City, Vietnam
Tel Number : (84) 28 3600 3700
Fax : [phone]
E-mail : [email protected]
Website : www.rigel.com.vn
CHINA
RIGEL SANITARY SHANGHAI CO., LTD 锐佳洁具（上海）有限公司 | Sales & Marketing Office
Address : 7th floor, Building 1 of Hongqiao Hub, 818 Shenchang Road, Shanghai，201107
E-mail : [email protected]
Website : www.rigel.com.cn
NINGBO RIGEL BATHROOM MARKETING CO., LTD (宁波锐佳卫浴销售有限责任公司) |
Sales & Marketing Office
Address : No. 11th, Meishan Avenue Business Centre, Room Nos. 3726, Beilun District, 315832,
Zhejiang, China
Tel Number : (86) 574 5626 1876
Fax : [phone]
E-mail : [email protected]
Website : www.rigel.com.cn
RIGEL TECHNOLOGY (NINGBO) CO., LTD ( 锐佳科技宁波有限公司 ) | Manufacturing Plant
Address : No. 6, Chuangye Road 3, Ningbo Beilun Free Trade West Zone, 315800 Ningbo, Zhejiang
China
Tel Number : (86) 574 5626 1688
Fax : [phone]
E-mail : [email protected]
Website : www.rigel.com.cn
RIGEL TECHNOLOGY CERAMICS (SICHUAN) CO., LTD 锐佳科技陶瓷工业（四川）有限公司 |
Manufacturing Plant
Address : No. 18, Shuanghechang, Anfu Town, Naxi District, 646300 Luzhou City 3 Sichuan, China
Tel Number : 86) 830 4270 028
Fax : [phone]
E-mail : [email protected]
Website : www.rigel.com.cn

CUSTOMER SUPPORT
AFTER SALES SERVICE
Rigel's Customer Support Team can provide you with service visits, sale of spare parts, and general product
help and advise.
SPARE PARTS
Spare parts for all Rigel products are available for up to 10 years after the product's date of final manufacture.
You should only purchase spare parts directly from our Customer Support Department, or from Rigel's
approved stockists or merchants to ensure authenticity and to maintain validity of your warranty.
NOTE: As a safety precaution, spare parts that require exposure to voltage from the power grid mains will only
be send to qualified personnel.
SERVICE GUARANTEE
All servicing provided by Rigel will be performed by a trained technician or agent, with genuine spare parts,
and will come with a 6-month warranty on the repair. Servicing outside of the product's warranty will be
charged at a reasonable cost
SINGAPORE (HQ)
RIGEL TECHNOLOGY (S) PTE LTD | Headquarters & Showroom
Address : RIGEL INNOVATION CENTRE | No. 20 Changi Business Park Central 2 Singapore 486031
Tel Number : (65) 6812 6288
Fax : [phone]
E-mail : [email protected]
Website : www.rigel.com.sg
MALAYSIA
RIGEL TECHNOLOGY (M) SDN BHD | Office & Showroom
Address : Wisma Rigel, No. 16 & 18, Jalan 3/33B, MWE Commercial Park, 6 ½ Miles, Off Jalan Kepong,
52000 Kuala Lumpur, Malaysia
Tel Number : (603) 6258 6016
Fax : [phone]
E-mail : [email protected]
Website : www.rigel.com.my
INDONESIA
PT. RIGEL MARKETING INDONESIA | Office & Showroom
Address : Jl. Sultan Iskandar Muda No. 99B, Arteri Pondok Indah, Gandaria Jakarta Selatan 12240,
Indonesia
Tel Number : (62) 21 2277 1188
Fax : [phone]
E-mail : [email protected]
Website : www.rigel.id
PART LIST & ILLUSTRATIONS
2.
NO. DESCRIPTION QTY
1
3
4
2
BOTTLE TRAP-UPVC, 1-1/4'' X 1-1/2'' (40MM)
L SHAPE BRACKET FOR UNDERCOUNTER BASIN
UNDERCOUNTER LAVATORY
BASIN WASTE, FIXED, 1-1/4'' 1
1
1 SET
1
1
2
3
4

WARRANTY
Please read the following warranty information thoroughly and retain this document for future use and
reference.
Rigel Technology (S) Pte Ltd ("Rigel") warranties the products against any defect of materials or
workmanship for a period of 1 year from the date of purchase.
Within the warranty period, all defective parts will be repaired and/or replaced free of charge.
To be eligible for free repair and/or replacement, any service work on the product must be undertaken
by Rigel or our approved agents.
Service under this warranty will not affect the warranty expiry date, and any warranty on exchanged
parts or products will end when the warranty expires.
This warranty is only applicable for products properly installed and operated in accordance to the
operating procedures stated in the instruction manual.
This warranty does not extend to washroom accessories or other peripheral items.
Rigel's responsibility under this warranty does not apply to damage/defects caused by:
·Misuse, negligence, or accidents.
·Public abuse or vandalism.
·Repairs or alterations not authorized by or performed without consultation from Rigel.
·Repairs or alterations that do not comply with Rigel's installation instruction.
·Repairs or alterations that were not performed with genuine parts supplied by Rigel.
Rigel will not be held liable for any incidental or consequential damages, including loss of profits or
savings, arising from the use or misuse of the products.
The terms in this warranty are only valid after:
·Full payment has been made.
·The official Warranty Card is completely and correctly filled out in ink and returned to Rigel within
14 days of purchase. Loss or misplacement of the Warranty Card, or unauthorized amendments
to the Warranty Card, shall render the warranty null and void.
This warranty is in addition to your statutory and other legal rights.
8.3.
()Denotes recommended value.
All dimension are in mm.
PRODUCT DIMENSIONS & INSTALLATION DIAGRAM
Depth. 135
Countertop. 840
Bracket. 400
Finished wall
(160)
Outlet. (505±25)
Water supply. (565) 83
(25)
200
Depends on countertop height.
Front view Side view
FFL
Ø17
(520)
505
440
475
550
Ø45
Top view
Ø35
(40)
Cut-out template
Finished Wall

INSTALLATION GUIDE
1.
2.
4.
·Items shown are for illustrations purpose only, and therefore may not reflect actual model supplied.
·Please read the instructions carefully before doing any installations.
Clean underside of the sealing
rim and fitting face of basin that
comes into contact with the
countertop to ensure both are
free of dust, dirt and grease.
Apply acetic cured silicone
sealant around the fitting face of
the basin.
Bed the basin into the countertop.
PRODUCT CARE & CLEANING
Guide
The instructions contained herein are for the proper care and maintenance of the product, to
ensure optimal function.
Please read the following care and cleaning information thoroughly and retain this document
for future use and reference.
CARE AND CLEANING INSTRUCTIONS
Before commencing on the cleaning of your Rigel product with any cleaning agents, please
read the directions on the cleaning agent to ensure that it is safe for use with the materials on
your Rigel product.
Always test any new cleaning agents on a small, inconspicuous spot on your Rigel product
before applying it on the entire surface.
Recommended Cleaning Agents Instructions
Routine cleaning - Soap
- Mild detergent
- Warm water
Sponge along the polish
lines and rinse with clean
water. Wipe dry.
Fingerprint stains - Soap
- Warm water
- Organic solvents (e.g. acetone,
alcohol, methylated spirits)
Sponge the stains following
the polish lines and rinse
with clean water. Wipe dry.
Stubborn stains or
discolouration
- Mild abrasive cleaning products
- Specialty stainless steel cleaning
products
Use a rag, sponge or soft
brush to apply the cleaning
agent, rubbing or brushing
along the polish lines. Rinse
well with clean water and
wipe dry.
NOTE : Avoid the use of harsh chemicals and/or abrasive materials to clean your Rigel
product as they may void your warranty.
PRODUCT CARE & CLEANING GUIDE
7.
1.
H
Template
A
CB
Outlet
Water supply
Please refer to pg.3 installation
diagram for the opening holes
on wall for water supply (B),
waste outlet (C) and
recommended height (H) of the
countertop.
Position 1:1 template over
countertop.
Attach template cut-out guide to
countertop with adhesive tape
or otherwise transfer cut-out line
to countertop. Minimum distance
(A) required.
Cut along the "cut-out template"
line.
Open a tap hole size as
required. (Only apply to basin
without tap hole but using
deck-mounted tap.)
Countertop
SILICONE
Countertop
Basin

3.
INSTALLATION GUIDE
5.
·Items shown are for illustrations purpose only, and therefore may not reflect actual model supplied.
·Please read the instructions carefully before doing any installations.
4.
GENERAL SPECIFICATIONS
Dimensions 550(L) X 505(W) X 200(H)mm
Material Vitreous China
TROUBLE SHOOTING GUIDE
OUT-OF-BOX FAILURE
If the product does not function as specified or reasonably expected upon first use after installation, please contact
your contractor or trades person to check if the installation and commissioning are performed satisfactorily and in
accordance with the instructions in the Installation Manual. You or your installer may contact Rigel for any advise
and we will be glad to be of assistance. Should this still not resolve the issue, please contact our Customer Support
Department and we will arrange for a visit by a Rigel service technician if necessary.
PERFORMANCE DECLINE
If the product is exhibiting a noticeable decline in performance after substantial use, please refer to the Product
Care and Cleaning section of this Manual to check if simple home maintenance is required.
Should product performance not improve after simple home maintenance is performed as per the instructions in the
Product Care and Cleaning section, please contact our Customer Support Department to discuss the issue you are
facing, and to request for service under warranty if applicable.
6.
Bottle trap
Waste
L-brackets
Use bracket clips underneath
the counter / request a helper
to hold on the basin while
preparing to place the
L-brackets.
Place the L-brackets below
the basin, drill holes and
tighten them with the screws.
L-brackets mounting location
and height refer to the pg.3
installation diagram.
Connect waste assembly to
the trap and all necessary
fittings.
Apply a layer of acetic cured silicone
sealant around the sealing rim
underneath the countertop.
Clean excess of silicone sealant
around basin.
SILICONE