RIUKOE RGBWA+UV User manual

9x12W Battery Wireless Par
(RGBWA+UV)
User Manual
Please read this user manual before using this product.

2
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
INDEX
STATEMENT......................................................................................................... 3
ACCESSORIES.....................................................................................................4
SAFETY INSTRUCTION......................................................................................5
UNDERSTANDING DMX.................................................................................... 8
TECHNICAL SPECIFICATION........................................................................ 12
CONTROL SYSTEM.......................................................................................... 13
CLEANING AND MAINTENANCE.................................................................. 17

3
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
STATEMENT
The product has well capability and intact packing when leave
factory. All of the user should comply with warning item and manual, any
misuse cause of the damages are not included in our guarantee, and
also cannot be responsible for any malfunction & problem owing to
ignore the manual.
IP65 RATED
An IP rated lighting fixture is one, which is commonly installed in outdoor
environments and has been designed with an enclosure that effectively
protects the ingress (entry) of external foreign objects such as dust and water.
The International Protection (IP) rating system is commonly expressed as
"IP" (Ingress Protection) followed by two numbers (i.e. IP65) where the
numbers define the degree of protection. The first digit (Foreign Bodies
Protection) indicates the extent of protection against particles entering the
fixture and the second digit (Water Protection) indicates the extent of protection
against water entering the fixture. An IP65 rated lighting fixture is one, which
has been designed and tested to protect against the ingress of dust (6) and
high-pressure water jets from any direction (5).
M A R I N E / C O A S T A L E N V I R O N M E N T I N S T A L L A T I O N S !
Please note although this fixture is IP rated, the fixture is NOT suitable for
marine and/or coastal environment installations. Installing this fixture in
a marine and/or coastal environment may cause corrosion and/or
excessive wear to the interior and/or exterior components of the fixture.
Damages and/or performance issues resulting from installation in a

4
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
marine and/or coastal environment will void the manufactures warranty
and will NOT be subject to any warranty claims and/or repairs.
Ensure ALL connections and end caps are properly sealed with a
non-conductive dielectric grease (available at most electrical suppliers)
to prevent water ingress/condensation and/or corrosion.
UNPACKING
Every par light has been thoroughly tested and has been shipped in perfect
operating condition. Carefully check the shipping carton for damage that may
have occurred during shipping. If the carton appears to be damaged, carefully
inspect your unit for damage and be sure all accessories necessary to operate
the unit have arrived intact. In the event damage has been found or parts are
missing, please contact our customer support team for further instructions.
Please do not discard the shipping carton in the trash. Please recycle
whenever possible.
ACCESSORIES
These items ar e packed together with the pr oduct:
Name
Quantity
Unit
Remar k
USER MANUAL
1
PCS
DMX CABLE
1
PCS
POWER CABLE
1
PCS

5
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
SAFETY INSTRUCTION
For proper operation, follow the Installation guidelines described in this
manual. Only qualified and certified personnel should perform installation
of this fixture and only the original rigging parts (brackets) included with
this fixture should be used for installation. Any modifications will void the
original manufactures warranty and increase the risk of damage and/or
personal injury.
Never look directly into the light source of this fixture to prevent risk of
injury to your retina, which may induce blindness. Those suffering from
EPILEPSY should avoid looking directly into the light source of this unit at
all times.
Always disconnect from main power source before performing any type of

6
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
service and/or cleaning procedure. Only handle the power cord by the
plug end, never pull out the plug by tugging the wire portion of the cord.
Do not operate this fixture if the power cord has become frayed, crimped
and/or damaged. If the power cord is damaged, replace it immediately
with a new one of similar power rating.
N E V E R O P E N T H I S F I X T U R E W H I L E I N U S E !
Ensure ALL connections and end caps are properly sealed with a
dielectric grease (available at most electrical suppliers) to prevent
water corrosion and/or electrical short circuit.
During the initial operation of this fixture, a light smoke or smell may emit from
the interior of the fixture. This is a normal process and is caused by excess
paint in the interior of the casing burning off from the heat associated with the
lamp and will decrease gradually over time.
Please make sure there are NO FLAMMABLE MATERIALS close to the
fixture while operating, to prevent any fire hazard.
Minimum distance of inflammable materials from the surface 1.6 feet
(0.5m).
DO NOT attempt installation and/or operation without knowledge how to
do so.
DO NOT allow operation by persons who are not qualified to operate this
type of fixture. Most damages are the result of operations by
nonprofessionals.
Consistent operational breaks may ensure the fixture will function properly
for many years to come.
DO NOT shake fixture, avoid brute force when installing and/or operating
fixture.
Always install the fixture with an appropriate safety cable. When installing
the fixture in a suspended environment, always use mounting hardware
that is no less than M10 x 25 mm, also be sure the hardware is insert in
the pre-arranged screw holes in the bracket of the fixture.

7
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
Use the original packaging and materials to transport the fixture in for
service.
DO NOT TOUCH the housing bare-hand during its operation. Turn OFF
the power and allow approximately 15 minutes for the fixture to cool down
before replacing or serving.
INSTALLATION:
C A U T I O N S
For added protection, mount the fixture in areas outside walking paths,
seating areas, or in areas were unauthorized personnel might reach the
fixture.
Min/Max ambient operating temperature for this fixture is 5°F to 113°F
(-15°C to 45°C). Do not use the fixture under or above this temperature.
Before mounting the fixture to any surface, make sure the installation
area can hold a minimum point load of 10 times the weight of the fixture.
210 lbs / 95 kg)
Fixture installation must always be secured with a secondary safety
attachment, such as an appropriate safety cable.
Never stand directly below the device when mounting, removing or
servicing.
Ensure ALL connections and end caps are properly sealed with a
dielectric grease (available at most electrical suppliers) to prevent

8
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
water corrosion and/or electrical short circuit.
POWER LINKING
Max number of units that can be power linked is 4 units @110V-@240V.
CLAMP MOUNTING
When mounting this fixture to truss be sure to secure an appropriately rated
clamp using an M10 screw fitted through the center hole of the Dual Yoke /
Floor Stand.
SECURING
Regardless of the rigging option you choose for your par light always be sure to
secure your fixture with a safety cable.
MOUNTING POINTS
Overhead mounting requires extensive experience, including amongst others
calculating working load limits, installation material being used, and periodic
safety inspection of all installation material and the device. If you lack these
qualifications, do not attempt the installation yourself. Improper installation can
result in bodily injury.
SAFETY CABLE
Always use a Safety Cable whenever installing this fixture in a suspended
environment to ensure the fixture will not drop if the clamp fails.
UNDERSTANDING DMX
DMX-512
DMX is short for Digital Multiplex. This is a universal protocol used by most

9
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
lighting and controller manufactures as a form of communication between
intelligent fixtures and controllers. DMX allows all makes and models of
different manufactures to be linked together and operate from a single
controller. This is possible as long as all the fixtures and the controller are DMX
compliant. A DMX controller sends the DMX data instructions to the fixture
allowing the user to control the different aspects of an intelligent light. DMX
data is sent out as serial data that travels from fixture to fixture via data “IN”
and data “OUT” XLR terminals located on the fixtures (most controllers will only
have output jacks).
DMX LINKING
To ensure proper DMX data transmission, always use the IP rated DMX cables
listed in the ACCESSORIES section coming along with the par light. When
using several DMX fixtures try to use the shortest cable path possible. Never
split a DMX line with a “Y” style connector. The order in which the fixtures are
connected in a DMX line does not influence the DMX addressing. For example;
a fixture assigned a starting DMX address of 1 may be placed anywhere in the
DMX chain, at the beginning, at the end, or anywhere in the middle. The DMX
controller knows to send data assigned to address 1 to that fixture no matter
where it is located in the DMX chain. The par light can be controlled via
DMX-512 protocol and the DMX address is set via the control menu.
DATA CABLE (DMX Cable) REQUIREMENTS (For DMX and
Master/Slave Operation)
Your fixture and your DMX controller require a standard 3pin connector for
data input and data output. Also, remember that a DMX line must be daisy
chained and cannot be split.
DMX-512 WIRELESS CONTROLLER CONNECTION
Wireless Dmx512 transmitter works by transferring standard dmx512 data

10
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
wirelessly, also between devices to devices. This product has completely
solved the data wireless transfer between console and lights, lights to lights,
get rid of the long relied twisted wires and achieve no delay, real-time in the
data transferring. 7 groups of ID codes are settable; the user can use seven
groups of separated wireless networks in one place without any interference.
The ID codes could be set on the OLED display located on the back of the
fixture.
There is status lamp on transmitter, it have 7 colors, corresponding to 7
wireless dmx channels in light.
CH1>>RED, CH2>>GREEN, CH3>>RED+GREEN,
CH4>>BLUE CH5>>RED+BLUE CH6>>BLUE+GREEN
CH7>>RED+BLUE+GREEN
DMX ADDRESSING

11
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
All fixtures should be given a DMX starting address when using a DMX
controller, so the correct fixture responds to the correct control signal. This
digital starting address is the channel number from which the fixture starts to
“listen” to the digital control information sent out from the DMX controller. The
allocation of this starting DMX address is achieved by setting the correct DMX
address on the OLED display located on the back of the fixture.
You can set the same starting address for all fixtures or a group of fixtures, or
set different address for each individual fixture. Be advised that setting all
fixtures to the same DMX address will subsequently control all fixtures in the
same fashion, in other words, changing the settings of one channel will affect
all the fixtures simultaneously.
If you set each fixture to a different DMX address, each unit will start to “listen”
to the channel number you have set, based on the quantity of control channels
(DMX channels) of each fixture. That means changing the settings of one
channel will only affect the selected fixture.
In the case of the par light, when in the 11 Channel Mode you should set the
starting DMX address of the first unit to 1, the second unit to 12 (1 + 11), the
third unit to 23 (12 + 11), and so on.
Battery
It need to charge a times for each two months, and 50% battery power at
least, if for a long time without using. Please charging as soon as possible
when get lights, also more than 6 hours for first time.
DON’T CHARGE THE LIGHTS WHILE USING, IT WILL AFFECT THE
BATTERY LIFE.

12
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
TECHNICAL SPECIFICATION
Electronic
Power supply: Electronic auto-ranging
Input voltage range: supply 100-240V, 50/60Hz
Light Sources
LED: TYANSHINE 9*12W RGBWAP 6in1 LED
LED life: 50000 hrs
Beam Angle: 25° (Option : 40°)
Battery
Battery capacity：14Ah
Charge time: 7.5 hrs
Using time: 4.5 hrs (Full power)
Battery cycle life: 500 times
Packing
Net Weight: 5.5Kgs
Carton packing size: 54*54*35cm(4pcs in 1 case)
Weight: 24KG (4pcs in 1case)
Control
DMX Channel: 7/11 Channel
Control Modes: DMX and Wireless
Construction
Display: OLED Display
Data In/Out socket: 3-pin XLR sockets

13
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
Power Socket: Powercon in/out
Protection Rating: IP65
Wireless
126 frequency band without interference automatically selected to ensure
communication reliability.
7 groups of ID codes are settable, the user can use seven groups of separated
wireless networks in one place without any interference.
Communication distance Diameter: 500M (open area)
Working frequency: 2.4G ISM, 126 full-band
Maximum transmit power: 20dBm
Receiver sensitivity: -94dBm
Features
Option for change LED Power (Eco, Medium, High power)
Battery Charging Information and Wireless Channel change in Display
Emergency Mode (enable / disable)
DMX hold （on/off）in display
Please Note: Specifications and improvements in the design of this unit and this manual are subject to
change without any prior written notice
CONTROL SYSTEM
OLED DISPLAY:
[ESC]：
MENU

14
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
MENU To select the programming
functions
UP To go forward in the
selected functions
DOWN To go backward in the
selected functions
ENTER To confirm the selected
functions
OPERATING INSTRUCTION
1. Press " Menu" to "Set DMX Address", and press " ENTER" keys to enter
into
2. Show "Set DMX Address DMX Address:001",Press the "UP and DOWN"
keys to amended
3. Press " ENTER" keys to save and Exit, Press the "MENU" Keys does not
save and Exit
4. Turn on operation: when in charging or turn off, press "MENU" for more t
han 4s, then screen will display clients' logo and model of products,
there are "MENU","UP"."DOWN" for your selection to choose the function,
press" ENTER" to confirmed and enter the next menu,press "MENU" coul
d back to the last menu.
When turn on , press" MENU" for more than 4s,the screen will display " P
ower Off",and will close LED output by then. If charger connect with elect
ricity,the screen will display charging icon and percentage of battery pow
er. Or will be turn off directly,and the battery powered will be totally cut off
5. When using Master-Slave model, apart from the first one as Master
without setting, the others need to set as Slave.
6. When using DMX512 controller, all the lights need to set as DMX model.
[UP]：
+
[DOWN]：
_
[ENTER]：
CONFIRM

15
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
FIXTURE MENU:
SYSTEM MENU
Specifications are subject to change without any prior written notice.
Choose Patter n
Static Color
Static Color
Show Mode
Sound model
User Colors
User Run
RGBWA UV (0-255) Strobe( 0-255)
001-016
AUTO / FADE / SNAP / STRO(RGBA)
Sound ( 1-3) outdoor no the function
RGBWA UV ( 000-255) Bank: 1/16
1. Static Color
2. Auto Mode
User setting
Channel
DMX512 Address
Slave Mode
7CH / 11CH
001-512
System setting
White balance
Show Battery
Display sleep
Dimmer option
RF 2.4 setting
RF 2.4 FREQ
Power Setting
Emergency Lamp
DMX Hold
RGBWA UV ( 0-255)
Yes / No?
Open/5Sec/10Sec/15Sec
Normal - lowest
Yes/No
1CH-7CH
High / Medium / Low
Yes / No
Yes / No
Infor mation
Led Temp:
Work Hours:
Software Version
Hardware version
30℃-70℃
000H-999H
V.1.02

16
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
DMX Channel Values / Functions (7Channel)
No.
Value
Function
1
0~255
Red dimmer
2
0~255
Green dimmer
3
0~255
Blue dimmer
4
0~255
White dimmer
5
0~255
Amber dimmer
6
0~255
UV dimmer
7
0~19
Normal model
20~39
Dimmer curve （slow )
40~59
Dimmer curve （slower )
60~255
Dimmer curve （slowest ）
DMX Channel Values / Functions (11Channel)
No.
Value
Function
1
0~255
Total dimmer for CH11 (0~9)
2
0~9
Strobe off
10~255
Strobe：10 lowest，255 fastest
3
0~255
Red，the max depend on total dimmer
4
0~255
Green，the max depend on total dimmer
5
0~255
Blue，the max depend on total dimmer
6
0~255
White，the max depend on total dimmer
7
0~255
Amber the max depend on total dimmer
8
0~255
UV the max depend on total dimmer
9
0~9
Dimmer model
10~29
Color choose ：CH10
30~49
Jump variable effect ：CH10 control the speed
50~69
gradual variable effect ：CH10 control the speed
70~89
mutation effect：CH10 control the speed

17
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
90~109
Red + strobe:CH10 control the speed
110~129
Green + strobe:CH10 control the speed
130~149
Blue + strobe:CH10 control the speed
150~169
Total strobe: CH10 control the speed
170~209
Sounds control the jump variable effect
210~229
Sounds control the jump variable effect + gradual
variable effect
230~255
Sounds control the strobe
10
0~255
This channel’s function are depending on the value of
CH7：
When the value is 10~29，then the function is colors
choose.
When the value is 30~189，then the function is speed
control: 0 is the lowest,255 is the fastest.
11
0~19
Normal model
20~39
Dimmer curve （slow )
40~59
Dimmer curve （slower )
60~255
Dimmer curve （slowest ）
CLEANING AND MAINTENANCE

18
www.riukoe.com PL-WT0096-IP65 9x12W Battery Wireless Par User Manual
CLEANING
Frequent cleaning is recommended to insure proper function, optimized light
output, and an extended life. The frequency of cleaning depends on the
environment in which the fixture operates: damp, smoky or particularly dirty
environments can cause greater accumulation of dirt on the fixture’s optics.
Clean the external lens surface at least every 20 days with a soft cloth to
avoid dirt/debris accumulation. Never use alcohol, solvents, or ammonia
based cleaners.
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life.
There are no user serviceable parts inside this fixture, please refer all other
service issues to our service technician. Should you need any spare parts, please
order genuine parts from your dealer.
Please refer to the following points during routine inspections:
A detailed electric check by an approved electrical engineer every 3 months,
to make sure the circuit contacts are in good condition and prevent
overheating.
Be sure all screws and fasteners are securely tightened at all times. Lose
screws may fall out during normal operation resulting in damage or injury.
Check for any deformations on the housing, color lenses, rigging hardware
and rigging points (ceiling, suspension, trussing). Deformations in the
housing could allow for dust to enter into the fixture. Damaged rigging points
or unsecured rigging could cause the fixture to fall and seriously injure a
person(s).
Inspect all moving parts and make sure there are no signs of wear and
rotate/move without imbalances.
Electric power supply cables must not show any damage, material fatigue or
sediments. Never remove the ground prong from the power cable.