Riva re1000 User manual

1
www.rivatech.de
RE1000
RE1000RE1000
RE1000
Installation Guide
Installation GuideInstallation Guide
Installation Guide

2
www.rivatech.de
INFORMATION TO USER
INFORMATION TO USERINFORMATION TO USER
INFORMATION TO USER
CAUTION
RISK OF ELECTRIC SHOCK,
O NOT OPEN
CAUTION: TO RE UCE THE RISK OF ELECTRIC SHOCK,
O NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSI E.
REFER SERVICING TO QUALIFIE SEERIVCE PERSONEL.
This symbol is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
!
!

3
www.rivatech.de
Table of Contents
Table of ContentsTable of Contents
Table of Contents
1.
1. 1.
1. FEATURES
FEATURESFEATURES
FEATURES ................................
................................................................
................................................................
................................................................
.............................................
..........................
............. 4
44
4
2.
2.2.
2. PACKAGE CONTENTS
PACKAGE CONTENTSPACKAGE CONTENTS
PACKAGE CONTENTS ................................
................................................................
...............................................................
..............................................................
............................... 5
55
5
3.
3.3.
3. PART
PARTPART
PART NAMES
NAMESNAMES
NAMES ................................
................................................................
................................................................
................................................................
.........................................
..................
......... 6
66
6
3.1. Front Panel ................................................................................... 6
3.2. Back Panel ................................................................................... 7
4.
4.4.
4. CONNECTIONS
CONNECTIONSCONNECTIONS
CONNECTIONS ................................
................................................................
................................................................
................................................................
........................................
................
........ 9
99
9
4.1.Connectors .................................................................................... 9
5.
5.5.
5. CONFIGURATION
CONFIGURATIONCONFIGURATION
CONFIGURATION ................................
................................................................
................................................................
................................................................
...................................
......
... 12
1212
12
5.1. Set up network environment .......................................................... 12
5.2. View video on web page ................................................................ 13
5.2.1. View video using IPAdmin Tool .................................................. 13
5.2.2. View video using IP address ..................................................... 14
5.3. Reset ........................................................................................ 15
5.4. Factory efault ............................................................................ 15
6.
6.6.
6. WALL
WALLWALL
WALL-
--
-MOUNTING
MOUNTINGMOUNTING
MOUNTING ................................
................................................................
................................................................
................................................................
.................................
..
. 16
1616
16
APPEN IX (A): SPECIFICATIONS
APPEN IX (A): SPECIFICATIONSAPPEN IX (A): SPECIFICATIONS
APPEN IX (A): SPECIFICATIONS ................................
................................................................
...................................................
......................................
................... 17
1717
17
Summary .......................................................................................... 17
Electrical Characteristics ...................................................................... 18
Environment Condition ......................................................................... 18
APPEN
APPENAPPEN
APPEN IX (B): POWER OVER ETHERNET
IX (B): POWER OVER ETHERNETIX (B): POWER OVER ETHERNET
IX (B): POWER OVER ETHERNET ................................
................................................................
.......................................
..............
....... 19
1919
19
PoE compatibility................................................................................. 19
Power classification............................................................................. 20
APPEN I
APPEN IAPPEN I
APPEN IX (
X (X (
X (C
CC
C): IMENSIONS
): IMENSIONS): IMENSIONS
): IMENSIONS ................................
................................................................
........................................................
................................................
........................ 21
2121
21
APPEN IX (
APPEN IX (APPEN IX (
APPEN IX ( ): H
): H): H
): HEXA ECIMAL
EXA ECIMALEXA ECIMAL
EXA ECIMAL-
--
- ECIMAL
ECIMALECIMAL
ECIMAL C
CC
CONVERSION
ONVERSIONONVERSION
ONVERSION T
TT
TABLE
ABLEABLE
ABLE ............
........................
............ 22
2222
22
REVISION HISTORY
REVISION HISTORYREVISION HISTORY
REVISION HISTORY ................................
................................................................
................................................................
................................................................
....................................
........
.... 23
2323
23

4
www.rivatech.de
1
11
1.
. .
. FEATURES
FEATURESFEATURES
FEATURES
Streaming
StreamingStreaming
Streaming
•ual streaming mode (such as different codec/resolution/bit rate and so on.)
•e-interlacing on SP
•Burnt-in text supported
•Unicast/Multicast supported
Video/
Video/Video/
Video/Audio
AudioAudio
Audio
•Video compression: H.264/MPEG/MJPEG, 25/30FPS@ 1(PAL/NTSC)
•Audio compression: G.711(µLaw, aLaw)/PCM
•Analog video out for external monitors
•Video Motion etection supported
•Two-way mono audio supported
Network
NetworkNetwork
Network
•RTSP/ HTTP protocol supported
•10/100 Base-T Ethernet
Additional Features
Additional FeaturesAdditional Features
Additional Features
•RS-232, RS-485 supported
•USB 2.0 supported (Local storage, Wireless LAN)
•S memory card supported
•PoE supported
•Built-in Video Content Analysis
•S K (Software evelopment Kit) provided
VCA (Video Content Analysis)
VCA (Video Content Analysis)VCA (Video Content Analysis)
VCA (Video Content Analysis)
•VCA Presence (Included as basic)
•VCA Surveillance (Optional)

5
www.rivatech.de
2
22
2.
..
. PACKAGE
PACKAGE PACKAGE
PACKAGE CONTENTS
CONTENTSCONTENTS
CONTENTS
Unpack carefully and handle the equipment with care. The packaging contains:
Encoder
EncoderEncoder
Encoder
C power adaptor
C power adaptorC power adaptor
C power adaptor
Mounting bracket
Mounting bracketMounting bracket
Mounting bracket
s
ss
s
9
99
9
Pin terminal block
Pin terminal blockPin terminal block
Pin terminal block
s
ss
s
Screws and anchor
Screws and anchorScrews and anchor
Screws and anchor
blocks
blocksblocks
blocks
Quick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
The above contents are subject to change without prior notice.
Note
i

6
www.rivatech.de
3
33
3.
..
. PART
PARTPART
PART NAMES
NAMESNAMES
NAMES
3
33
3.
..
.1
11
1. Front P
. Front P. Front P
. Front Panel
anelanel
anel
1.
1.1.
1. System Status LE s
System Status LE s System Status LE s
System Status LE s
The LE s are located on the left side of the front panel and they indicate certain
system information.
Status
StatusStatus
Status This LE lights up as orange and turns green when the encoder is powered on.
ata
ataata
ata This LE lights up when the host system is turned on with a connection is made.
(The color of LE s is subject to change according to the firmware version. To
change its setting, refer to the section 4.5.11. LE Setting
4.5.11. LE Setting4.5.11. LE Setting
4.5.11. LE Setting of the RE Web
RE Web RE Web
RE Web
Page User’s Manual.
Page User’s Manual.Page User’s Manual.
Page User’s Manual.
)
2.
2.2.
2. Video
Video Video
Video Input BNC connector
Input BNC connectorInput BNC connector
Input BNC connector
As a video input connector, connect to the camera.
3.
3.3.
3. S memory card slot
S memory card slotS memory card slot
S memory card slot
Insert a S memory card for local storage.
Status
Data Vin Vout
1CH Encoder
SD
1
2
3
4

7
www.rivatech.de
4.
4.4.
4. Loop out
Loop outLoop out
Loop out BNC connector
BNC connectorBNC connector
BNC connector
As a loop out connector, connect to a device such as a VCR or monitor.
3
33
3.
..
.2
22
2. Back Panel
. Back Panel. Back Panel
. Back Panel
5.
5.5.
5. USB 2.0 port
USB 2.0 portUSB 2.0 port
USB 2.0 port
Insert a USB storage device or Wi-Fi devices. (Ralink RT73 or RT3070 chipset based
wireless device is available.)
6.
6.6.
6. LAN connector
LAN connectorLAN connector
LAN connector
Use the RJ45 LAN connector for 10/100 Base-T Ethernet.
7.
7.7.
7. Audio IN/OUT
Audio IN/OUTAudio IN/OUT
Audio IN/OUT
The encoder has one channel mono audio input/output. As the output power for the
audio is low, an amplifier speaker is needed.
8.
8.8.
8. I/ O
I/ OI/ O
I/ O
The encoder supports two channels for each of I and O. Refer to the section
“4
44
4.
..
.1
11
1.Connectors
.Connectors.Connectors
.Connectors”
””
” for more specific information.
USB
DC12V
Ethernet Reset
DI
2 Rx Tx1 RS-232
Ain
CRS-485DO
21
Aout
1
1
5
6
7
8
9
10
11

8
www.rivatech.de
9.
9.9.
9. RS
RSRS
RS-
--
-232/RS
232/RS232/RS
232/RS-
--
-485
485485
485
RS-232C Terminal Block is used for some devices such as POS terminal block. RS-
485 is used for PTZ controls.
10.
10.10.
10. Reset
Reset Reset
Reset
Reboot the device system or reset the device to its Factory default settings. Refer to
the section “5
55
5.
..
.3
33
3. Reset
. Reset. Reset
. Reset”
””
” for more specific information.
11.
11.11.
11. Power connect
Power connectPower connect
Power connecto
oo
or
rr
r
Connect the power adaptor for power supply. C 12V 1A adaptor is needed.

9
www.rivatech.de
4
44
4.
..
. CONNECTIONS
CONNECTIONSCONNECTIONS
CONNECTIONS
4
44
4.
..
.1
11
1.Connectors
.Connectors.Connectors
.Connectors
Video
Video Video
Video connection
connectionconnection
connection
Connect the camera to the Video input connectors
Video input connectorsVideo input connectors
Video input connectors on the back panel using 75 ohm
video coaxial cables with a BNC connector. Each video channel input among these
connections can be looped to other equipments as CRT monitor through External
External External
External
Video output connector
Video output connectorVideo output connector
Video output connector.
Make sure to connect the analog video
input before you turn on the
encoder. Otherwise, the device must be rebooted to see the
normal display if the camera is NTSC, because the encoder default
setting is PAL without a video connection.
Audio connection
Audio connectionAudio connection
Audio connection
Connect to the audio input device such as a Mic.
Audio input range: 0.01/3.3 (Min/Max)
Note
i
Mic
Ain
Speake
Aou

10
www.rivatech.de
Sensor Input ( /I)
Sensor Input ( /I)Sensor Input ( /I)
Sensor Input ( /I)
There are two sensor interface types – Voltage Type and Relay Type. The interface
type can be controlled by the software. Before connecting sensors, check driving
voltage and output signal type of the sensor. Since the connection is different
according to sensor type, be careful to connect the sensor.
Input voltage range: 0 V C minimum to 24 V C maximum
Input voltage threshold: 1 V
Signal
escription
COM Connect (-) cable of electronic power source for sensors to this port
as shown in the circuit above.
1~ 2 Connect output of sensors for each port as shown in the circuit
above.
o not exceed the maximum input voltage or relay rate.
o not use voltage and relay type sensor together.
Caution
!
+5V
+5V
I 1
I 2
COM
I 1
I 2
COM
+
-
Relay Type Voltage Type
+5V C~+24V C
+
-
+-
Output of
Sensor 1
Output of
Sensor 2
Output of
Sensor 2
Output
of
Sensor 1
Internal Internal
+
+
-
-