RMS Marley Canopy User manual

Marley Canopy
Installation Guidelines
 Do not put items on the canopy when open or folded.
 Do not apply excessive force when opening and closing the canopy.
 Regularly inspect the canopy and mounts for damage and security.
 Remove Canopy before folding the Marley buggy.
 3mm allen key and 8mm spanner.
Fitting Instructions
 Attach the mounting brackets Ato the mounting holes at the rear of the Marley
back rest using the screws and nuts Bprovided.
 Insert the canopy locating arms into the mounting brackets untill tab Cclicks into place
 Check alingment and angle of the canopy is as required.
 To remove depress the centre tab Con the locating arm and carefully lift upwards.
A
B
B
C

Slip top of rain cover over
the canopy and pull around
canopy.
Secure the
hook and
loop straps
around the
top of the
rear frame
leg.
Bottom of rain cover slips
over the footrest.
Marley Rain Cover
Installation Guidelines
Thompson House, Unit 10 Styles Close,
Sittingbourne, Kent, ME10 3BF
Tel: [phone] Fax: [phone]
E-mail address: [e-mail]
www.ineedawheelchair.co.uk
Dec 2021
MARCAN-IFU-2021-rev1