Roadstar PCD-435CD/BK User manual

NOTICE
MARQUE: ROADSTAR
REFERENCE: PCD-435CD/BK
CODIC: 4157591

PCD-435CD
SLIM PORTABLE CD PLAYER WITH LCD
DISPLAY
Instruction manual
Bedienungsanleitung
English Page 1
Deutsch Seite 7
INDEX
• Ihr neues Gerät wurde unter Beachtung der strengen
ROADSTAR-Qualitätsvorschriften gefertigt.
WirdankenIhnenfürdenKaufunseresProduktesund
wünschenIhnenoptimalenHörgenuss.BittelesenSie
diese Bedienungsanleitung durch, und heben Sie sie
auf, um jederzeit darin nachschlagen zu können.
• Your new unit was manufactured and assembled un-
der strict ROADSTAR quality control.
Thank-you for purchasing our product for your music
enjoyment.
Before operating the unit, please read this instruction
manual carefully. Keep it also handy for further future
references.
(10)
(9)
(12)
(11)
(7)
(6)
(5)
(2)
(8)
(3/4)
(1)
Battery Compartment
www.roadstar.com
Roadstar management SA, via Passeggiata 7 CH 6883 Novazzano (Switzerland)

EnglishEnglish
1 2
The exclamation point within the triangle is a warning sign alert-
ing the user of important instructions accompanying the
product.
The lightening flash with arrowhead symbol within the triangle
is a warning sign alerting the user of “dangerous voltage” inside
the unit.
To reduce the risk of electric shock, do not remove the cover. No
user serviceable parts inside the unit. Refer all servicing to
qualified personnel.
This unit employs a laser. Only a qualified service person should
remove the cover or attempt to service this device, due to
possible eye injury.
Invisible laser radiation when the unit is opened or interlocks
defeated. Avoid exposure to laser beam. Use of controls,
adjustments or procedures other than those specified herein
may result in hazardous radiation exposure.
This unit must not be exposed to moisture or rain.
Do not expose this unit to direct sunlight or heat radiatingsources.
Make sure all batteries are inserted according to the proper
polarity. Do not mix old batteries with new ones.
If the unit is not used for a long period of time (more than 1
month), remove all batteries from their compartment to avoid
possible leaking.
WARNINGS PCD-1900
Portable Audio CD with LCD display.
TABLE OF CONTENTS
• Functions and Controls
• PowerSupply
• Connections
• Earphones
• CDPlayback
• Locating a Particular Track or Point of the Track
• RepeatPlayback
• Introplay
• Randomplay
• ProgrammedPlayback
• AutoPower Off
• Maintenance
• Specifications
FUNCTIONS AND CONTROLS
1. PROGRAMbutton
2. MODEbutton
3. SKIP/SEARCHbackwardbutton
4. SKIP/SEARCHforwardbutton
5. STOP button (Auto Power Off)
6. PLAY/PAUSEbutton(AutoPowerOn)
7. CD DOOR
8. CD Door Open button
9. DC4,5VEXTERNALINPUT
10. VOLUMEcontrolknob
11. HEADPHONEsocket
12. BATTERYcompartment
POWER SUPPLY
Use with regular batteries
1. Openthebatterycompartmentdoor(12),locatedinthedisccompartment.(Donotremove
thebatterydoor).
2. Insert2x1.5V/UM-3/AAsizealkalinebatteries,followingthecorrectpolarity,asindicatedin
ATTENTION!
Extended listening at high volumes can cause damages to hearing.

EnglishEnglish
3 4
thebattery compartment.
3. Close the battery compartment door.
Note: Ifthesymbol“ “flashesinthedisplay,batteriesareweakandoughttobereplaced.
EARPHONES
Connect the stereo earphones (included) to the Phones jack (11).
CDPLAYBACK
1. Connect theearphones (included) oroptional headphones into thePhones jack.
2. Press the Door Open button (8) to open the CD compartment door.
3. Insert a disc with the label side facing up.
4. Close the CD compartment door until a click is heard.
5. Set the VOLUMEcontrol (10) to minimum.
6. PressthePLAY/PAUSE( >II ) button(6),theunitpowerwill turnonautomaticallyandstart
playback.
The total number of tracks and total playing time appear on thedisplay. Playback starts.
During playback, the actual track and the elapsed time appear.
7. AdjusttheVOLUMEcontroltoyourdesiredlisteninglevel.
8. Tostopplaybacktemporarily,pressthePLAY/PAUSE(>II)button(6)once.Theelapsedtime
and track number will flash on the display. Press the PLAY/PAUSE ( >II ) button again to
resumeplayback.
9. To stop playback, press the STOP (5) button once.
10. To turn the unit off, press the STOP (5) twice.
Notes:
• WhentheCDdoorisaccidentallyopenedduringplayback," "willappearonthe
display.
• Wait until the disc is fully stopped before pressing the OPEN button.
• This unit can play 3" (8cm) single CDs without an adaptor.
LOCATING A PARTICULAR TRACK OR POINT OF THE TRACK
1. Press the - SKIP/SEARCH () (3) button once to go back to the beginning of the current
track.
2. Press the - SKIP/SEARCH () (3) button repeatedly to go back to previous tracks.
3. Press the +SKIP/SEARCH () (4) button repeatedly to go to next tracks.
4. Press and hold either +SKIP/SEARCH () or - SKIP/SEARCH () button to search
backwards or forwards, at highspeed, a particular point of track.
Note: Lowlevelaudiowillbeheardduringthesearchprocesstoassistinlocatingthecorrect
pointin the track.
REPEATPLAYBACK
1. PressthePLAY/PAUSEbutton(6).
2. Torepeatthesametrack,presstheMODE button(2)once.The” 1”indicatorwillappear
on the display. The CD will start single repeat playback until STOP button (5) is pressed.
3. To repeat the entire disc, press the MODE button (2) twice. The “ ALL” indicator will
appearonthedisplay.
INTROPLAY
1. Press the PLAY/PAUSE button (6) and after 5 seconds the STOP button (5).
2. Press the MODE button (2) three times to enter the Intro mode, 'INTRO' appears on the
display.
3. Press the PLAY/PAUSE button, CD will play the first 10 seconds of each track on the CD.
4. Press MODE button (2) once more to cancel Intro playback and resume normal playback.
5. Power is turned off automatically after 30 seconds, when all tracks havebeen played.
RANDOMPLAY
1. Press the PLAY/PAUSE button (6) and after 5 seconds the STOP button (5).
2. Press the MODE button (2) to enter the Random mode. “RND” flashes on the display
3. Press PLAY/PAUSEbutton (6) to start playback in Random order.
4. Press SKIP Forward () button (4) to go to next Random track.
5. Press the MODE button once more to return to the Normal Playback mode.
PROGRAMMEDPLAYBACK
1. Press the PLAY/PAUSE button (6) and after 5 seconds the STOP button (5).
2. PressthePROGRAMbutton(1).Thetracknumberandtheprogramnumberwillappearand
“PROG” will flash on the displayindicating the first selection.
3. Press- SKIP/SEARCH()or+SKIP/SEARCH()buttontoselectthedesiredtrack tobe
programmed. The track number which will be programmed will appears on the display.
4. Press once the PROGRAM button (1) to enter the track into memory.

EnglishEnglish
5 6
5. Repeat the steps 3 and 4 to program up to 20 tracks.
6. Press PLAY/PAUSE (>II) button (6) once to start programmedplayback.
7. To cancel programmed playback, press the STOP button (5) twice.
Note: Programming can set only in Stop mode.
Duringprogramplayback,ifyouwishtorepeattheentireprogrammedplayback,press
the MODEbutton (2) repeatedlyuntil the “ ALL” indicatorappears on thedisplay.
AUTO POWER OFF
When the unit is stopped (standby mode) for approximately 30 seconds, the Auto Power Off
functionwillactivatedandturntheunit off automatically.
MAINTENANCE
Cleaning the unit
Wipe the outside surface of the unit with a soft cloth moistened with water and mild soap.
Handling CDs
YourCDplayerhasbeenespeciallydesignedforthereproductionofcompactdiscsbearingthe
CD mark. No other discs should be loaded into the player.
Always place the disc in tray with the label facing up.
Although compact discs are impervious to wear during play, damage to the surface of a disc
throughimproperhandlingwillresultinplaybackirregularities.
To preserve your compact discs, please handle them with care.
Althoughminutedustparticlesandfingerprintsshouldhavenoeffectonplayback,youshouldkeep
the serfaceof the recordedside of your discs cleanby wiping thedisc with a clean,dry, lint-free
soft cloth with straight movements from the centre outwards.
Neveruserecordcleaners,recordsprays,antistaticsprays,liquidsnorchemicalbasedliquids to
clean the surface of a disc. They may in fact irreparably damage the disc's plastic surface.
Alwaysreturnthedisctoitsprotectiveplasticcasewhennotusingit.Avoidexposingdiscstodirect
sunlight, excessive temperaturesor high humidity forextended periods of time. Do not write on
the label side of the disc with a ball/point pen as this may scratch the disc.
IMPORTANT
Since movement of the CD mechanism and the sensitive circuitry may cause interference to a
radio tuner nearby switch this unit off while operating other radio devices.
This productutilizes a laser
Danger- Invisible laser radiation when opened andinterlock failed or defeated.Avoid direct
exposure to the beam.
Caution- Use of controls, adjustments, or procedures not listed in this manual may result in
hazardous radiation exposure.
SPECIFICATIONS
Audio
D/Aconversion 1-bit DAC , 8 times oversampling
Frequencyresponse 20-20,000Hz
Wow andflutter Below measurable limits
No. of channels 2 channels (stereo)
Headphone: 20mW (32Ohm)
General
Power requirements -2 xLR6 /UM-3 / “AA” alkaline battery
Power consumption 0.8W (DC 3V)
Dimension Approx.135(W) X24(H)X 148(D)
Weight 245g.
Specifications and thedesign are subject to possible modifications without notice.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should not be
disposedwithotherhouseholdwastesattheendofitsworkinglife.Topreventpossible
harm to the environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,
or their local government office, for details of where and howthey can take this item
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial
wastes for disposal.
Concerning Compact Discs
Only compact discs identified with this mark can be used with this
player.