Robic M367 User manual

Robic M367 Digital Tally Counter Operating Instructions
THANK YOU for buying the M367 Digital Tally Counter. Your purchase brings
you a World-Class Tally Counter that provides Counting functions which are applicable
to numerous sports and everyday activities.
Your Digital Tally Counter was developed to provide Count Up or Countdown
tallies, silently or with a beep confirmation, and includes a lock function so that it cannot
be accidentally reset. In order to ensure that you receive the maximum enjoyment from
your Tally Counter, BEFORE USING, PLEASE TAKE A MOMENT TO REVIEW
THIS OPERATION GUIDE TO FULLY UNDERSTAND HOW YOUR COUNTER
WORKS.
Counts up or down to/from 99,999.
Operates with beep confirmation or silently.
You may “lock” a value in so it cannot be accidentally reset.
ASET ►◄BRESET
“C”
CADVANCE
Middle Black Pusher ◄DLOCK
Pusher A: “+/- SET”
Pusher B: “RESET”
Pusher C: Counter (Middle Black Pusher)
Pusher D: LOCK
Press and Hold both A and B to select beep tone--((●))—or silent operation.
Press A to select count up (+ appears above the digits) or Count down (- appears). The
M367 will not Count down to less than zero.
To Count, Press C each time to increase or decrease the count by one.

To Reset to all zeros, Press and Hold B for > 3 seconds.
You may lock the Count at any time by pressing and holding D. The Lock icon appears.
The value cannot be changed when locked.
To preset (enter) a value from which to count up or down, press and hold A for > 3
seconds. The digits on the far right appear flashing. Advance the digits by pressing C.
Press A again to select each successive value (tens, hundreds, thousands and ten
thousands). Press D to exit setting mode.
You may also select Up (+) or Down (-) anytime the M367 is not locked.
LIMITED WARRANTY
OUR BASIC POLICY
Marshall –Browning International Corporation (MBI Corp.) warrants to the original
owner, this Tally Counter (excluding battery, less, band or strap) for the period of one
year from the original purchase date. This limited warranty is given by MBI Corp. and
not by the dealer from whom the timepiece was purchased.
______________________________________________________________________
THE WARRANTY PROCESS – WHAT IS COVERED BY THE WARRANTY
If the timepiece develops a manufacturing defect within the one year limited warranty
period, it will be either repaired or replaced (at MBI Corp.’s option) with a timepiece of
equal value, providing the original owner submits the following:
1. Proof of purchase, i.e. a validated store receipt showing date of purchase.
2. A check or money order (no cash, please) in the amount of $7.50 to cover the cost of
shipping and handling
WHAT IS NOT COVERED BY THE WARRANTY
A. MBI Corp. will not repair defects of damages caused by or showing evidence of:
1. Improper or unauthorized service.
2. Misuse, tampering, abuse or mistreatment of the timepiece.
3. Damage to the case or viable cracking of the lens.
4. Moisture damage, if the product is a non-water-resistant timepiece.
B. If we find that the battery is the cause of the defect, MBI Corp. reserves the right to
charge your ($7.50) for a new replacement.
MBI Corp. is not liable for incidental or consequential damages. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above
limitation may not apply to you.
YOUR RIGHTS UNDER IMPLIED WARRANTIES AND STATE LAW.
MBI Corp. limits the duration of any warrant implied by state law, including the implied
warrant of merchantability, to one year from the date of original purchase. Some states
do not allow limitations on how long an implied warranty lasts, so the above limitation
may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.

CARING FOR YOUR TALLY COUNTER
Proper care of your Tally Counter will provide many years of enjoyment. We recommend that:
1The battery be replaced at once when it becomes depleted. Please ask your local
retailer to replace the battery for you using LR44 or equivalent.
2. The lens be replaced immediately if it becomes damaged, as contamination from dust,
moisture, and other foreign substances will damage the module.
3. If the Tally Counter is not marked “water-resistant,” avoid immersing or exposing it
to water, steam, or other forms of moisture.
WHEN YOU REQUIRE SERVICE
If your Tally Counter ever requires factory servicing, you can send it directly to:
MBI CORP, 353 CHRISTIAN STREET # 3, OXFORD, CT 06478
We strongly recommend that when sending it through the mail, you send the product
insured, return receipt requested, so that if a problem in shipping arises, you can trace it
through the originating post office. You will be billed for all services deemed out of
warranty; and since we reserve the right to substitute with a replacement product of equal
or greater value, NEVER include a personal item, such as a watchband, with the repair
request.
Robic…Timers & Tally Counters for champions at every level! Please call (203) 264-
2702 for a free catalog. www.RobicTimers.com
MBI Corp. c/o Frazier Sports 6600 Broad Avenue Waco TX 76712