ROCK FABRIK EFFECTS KUEK User manual

KUEK!
USER MANUAL!
w
a
y
s
p
e
e
d
d
e
p
t
h
d
e
c
a
y
r
a
i
d
t
o
u
c
h
D
u
t
y
c
y
c
l
e
v
o
l
u
m
e
w
a
v
e
f
o
r
m
touch sensitive dynamic tremolo
9v in
out
tap on
x2
x3
x1

KUEK/Touch Sensitive Dynamic Tremolo
All things in our"universe"are constantly in vibrating. Even objects that appear to be stationary are
in fact vibrating, oscillating, resonating, at various frequencies. Everything from subatomic particle
to giant planets is oscillating. Even our thoughts are vibration of energy. KUEK is the another door
to enter this universe. KUEK will help you to conquer the vibration universe with your fingers.
Make KUEK’s acquaintance and then dominate the vibrance. !
Description
KUEK is digitally controlled analog tremolo/vibrato unit. Even though LFO and controls digital,
whole signal path is analog. So we can say it’s a marriage of digital control and vintage analog
sound. Also it’s much more than conventional tremolo/vibratos. Besides modern features like tap
tempo, multi waveforms, It has many more unique features like duty cycle, dynamic speed which
depends on your playing. Detection circuit takes sample of input signal without make any
differences of main audio signal to control dynamic features. How your fingers will effect dynamic
features is completely controllable with bunch of potentiometers. Even every single motion of your
finger can be detected. !
Controls
Pots;
DUTY CYCLE : Sets fraction of one period in which a signal is active.!
DEPTH : Determines intensity of tremolo effects. !
SPEED : Sets first value of dynamic speed. !
WAY : Sets last value of dynamic speed. Also controls direction of dynamic speed. It’s speed up
region till way pot is half and speed down region from half to full. To fix speed keep it half. !
WAVEFORM : Selects waveform from Sawtooth- Square- Triange- Sine-!
Rectified Sine respectively. !
DECAY : Controls the time it takes for the speed to go from the maximum level to minimum level
which you set. !
RAID : Controls the time it takes for the speed to reach the maximum level which you set.!
TOUCH : Adjusts sensitivity of your touch. When it’s all the way down, speed sets by way and
speed pots together or tap tempo switch. !
VOLUME : Controls output signal level. !

Switches;!
TAP DIVISION TOGGLE : Marked as x1,x2,x3. Selects between no division(x1), half notes(x2) or
triplet(x3). !
TAP TEMPO FOOTSWITCH : Measures the time between two presses of a switch, and uses this
time to set the LFO’s basic tempo. Tap led indicates to between two presses. For this feature
touch pot must be all the way down. !
ON FOOTSWITCH : Press switch to engage pedal. !
Tips;
-For using as a conventional tremolo, turn the touch pot all the way down, so speed will be not
affect from your playing.!
-When using as a conventional tremolo, sets speed with way and speed pots together. They are
interdependent in this situation. !
-To use tap tempo switch effectively, touch sensitivity shouldn’t be active.!
-For usual tremolo sounds, keep duty cycle pot on half. !
Specifications
Input impedance : 1M!
Output impedance : 150 ohm!
Current draw: 75mA!
Power supply: 9V negative center(100mA recommended)!
Min LFO frequency: 0.1 Hertz!
Max LFO frequency: 40 Hertz!
Attack time : 20ms-3s!
Decay time: 20ms-3s!
Relay True Bypass!
Dimmension: 120x100x50mm!
!
!
COPYRIGHTS © 2019 ROCKFABRIK EFFECTS | ALL RIGHTS RESERVED. PRODUCT
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.