Rockwell Automation 9300-USBE Series User manual

QUICK START GUIDE
9300-USBE - USB TO ETHERNET ADAPTOR
KIT
CONTENTS
Connections
USB Cable
USB
Cable
Ethernet
Cable
Ethernet
Cable
Ethernet
Switch
Cable Bag
CD USBE
Crossover
Ethernet
Cable
To Begin Install:
Plug the units USB cable into an open USB port on the computer.
Place the CD into the computer’s CD disc drive. 9300-USBEL units
also function as a USB Flashdrive. On these units the device drivers
are factory installed within the units memory
USB
Cable
Crossover
Ethernet
Cable
A

New Hardware izard
B
RSLinx
For more information go to: www.rockwellautomation.com
GMSC10-QS005A-EN-P April 2010
C
D
Power
10BaseT Speed
100BaseT Speed
Ethernet Activity
Note:
Units MAC ID
located on lable
9300-USBES - 2GB storage
9300-USBEL - 8GB storage
PN-65251