Rockwell Automation PlantPAx 7477-ISVS100 User manual

Quick Start
PlantPAx Process Automation System
Catalog Numbers 7477-ISVS100, 7477-ISVS250, 7477-IC2VC
Click Next to enter the Windows Setup Wizard.
Read and accept the End User License Agreement (EULA).
Gather this information and complete the Windows Setup Wizard.
When the Windows Setup Wizard is complete, the computer will restart automatically.
The new Windows desktop may take a few minutes to load.
Regional and Language Settings
Name
Organization
Server Licensing Mode (For Windows Server bundles only) 5 CALS
Computer Name
Windows Administrator Password
Network configuration: Workgroup or Domain
Workgroup/Domain Name
Attach hardware if mounting
is required. Connect peripherals. Connect power and
turn on the computer.
123
The computer will boot to a
Windows Setup Wizard.
4
5
6

Publication 7477-QS001A-EN-P - June 2009 2PN-40859
Copyright © 2009 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Log in to Windows using the administrator password set in step 6.
The computer is now setup. To begin configuration of your Process System, see the PlantPAx Server and Workstation user manual, located in the
PlantPAx documentation folder on your desktop.
Additional Resources
For additional information refer to these publications.
You can view or download publications at http://literature.rockwellautomation.com.
Installation Assistance
If you experience a problem within the first 24 hours of installation, please review the information in this document. You can also contact a special
Customer Support number for initial help in getting your product up and running.
Publication Number Description
PlantPAx Server and Workstation user manual,
publication 7477-UM001.
Provides information for configuring software on the Process
Automation System Server and Operator Workstation.
United States 1.440.646.3434
Monday – Friday, 8am – 5pm EST
Outside United States Please contact your local Rockwell Automation representative for any technical support issues.
7