Rogers 410353 User manual

Product Information Packet
Product Name: Portable Goal Post
Product Part Number: 410353

1
Table of Contents
Introduction……………………………………………………………………………….……..……………….…
General Safety Rules…………………………………………………………………….…..……………….…..
Symbols……………………………………………………………………………………..…………………...…
Technical Specifications………………………………………………………………..………………………...
Assembly Instructions…………………………………………………………………………………………..
Maintenance…………………………………………………………………………..……………………….…..
Customer Service Information………………………………………………………..………….……...……….
Introduction
The Rogers Athletic Portable Goal Post has been designed and manufactured with safety, performance and
dependability as top priorities, making it easy to operate and maintain.
The care you give your Portable Goal Post will greatly determine your satisfaction with its performance and
service life. Careful study of this manual is encouraged to obtain a thorough understanding of your new
Portable Goal Post and its functions.
If your manual is lost or destroyed, Rogers Athletic will gladly provide you with a new copy. Should you require
additional information or assistance, please feel free to contact us at 800-457-5337.
BECAUSE ROGERS ATHLETIC MAINTAINS AN ONGOING PROGRAM OF
PRODUCT DEVELOPMENT AND IMPROVEMENT, WE RESERVE THE RIGHT
TO MAKE IMPROVEMENTS IN DESIGN OR CHANGES IN SPECIFICATIONS
WITHOUT INCURRING ANY OBLIGATIONS TO INSTALL THEM ON UNITS
PREVIOUSLY SOLD.
1
2
3
4
5
9
9

2
General Safety Rules
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below may result in serious personal
injury.
SAVE THESE INSTRUCTIONS
Use field equipment in a supervised environment with proper gear.
Keep body and clothing free from and clear of all moving parts
Inspect equipment prior to use. DO NOT use if it appears damaged or inoperable.
Disassemble / store Portable Goal Post when winds above 40mph are expected.
Save these instructions. Refer to them frequently and use them to instruct others who may use the
Portable Goal Post. If you loan someone your Portable Goal Post, loan them these instructions also.
Read the Product Information Packet. Failure to read the information packet is considered a misuse
of this equipment.
Become familiar with all caution and warning decals affixed to the field equipment before use.
Never cover or deface caution/warning labels.

3
Symbols
Read the Operator’s Manual: To reduce risk of injury,
user must read and understand operator’s manual before
using this product.
Do Not Climb Symbol: Climbing on or playing around
equipment may result in personal injury.
Safety Alert: Precautions that involve your safety.
For Off-Road Use Only Warning Label: Field equipment
is not intended or designated for roadway travel

4
Rogers Athletic Field Equipment Specifications
Portable Goal Post
Drive Sled Construction, Finish, and Hardware
- Constructed of ASTM specified steel.
- Baked-on powder coat finish..
- Zinc-plated hardware.
Weight: 18’6” = 1170 lbs
23’4” = 1200 lbs
Height: 18’6” = 29’9”
23’4” = 35’10”
Length: Both = 24’6”
Width: 18’6” = 19’2”
23’4” = 23’10”
- Heavy duty winch facilitates raising and
lowering the crossbar
- Allows easy two-person set-up, take down and
transportation to accommodate many fields.

5
NOTE: Two people are needed for Portable Goal Post Assembly and set-up.
Slide hitch assembly into frame assembly. Insert (2) ½” bolts and nuts.
Bolt Wheel Assemblies onto frame assembly using (4) ½” nuts and bolts per side.
2
1

6
Slide Goal Crossbar into base assembly. Insert (2) 5/8” Bolts and Nuts as shown.
With steamer attached, place upright onto crossbar. Insert (2) ½” bolts and nuts per side.
3
4

7
Pull Fas-pins in rear stabilizer legs, slide out to extended position. Re-insert Fas-pins. Crank both jacks
down so the Portable Goal Post is level. Also crank the front jack to be level with the rear.
Pull fas-pin from the Goal Post Lock. Pull Goal Post Lock.
6
5

8
7
Turn winch handle to raise goal post.
Re-insert Goal Post Lock, and Fas-pin into Goal Post Lock.
8

9
Maintenance
WARNING!
READ AND UNDERSTAND ALL MAINTENANCE PROCEDURES.
Failure to follow all procedures listed below may cause serious injury and/or
decrease equipment functionality.
Frequently check to see that all bolts are securely fastened.
Touch up paint may be used to cover scratches or blemishes sustained through use.
Field equipment should be washed periodically with soapy water to maintain original surface
finish.
Replace any damaged equipment with genuine Rogers Athletic parts. Failure to do so may result
in unsafe equipment and/or personal injury.
Customer Service
For parts or service contact Rogers Athletic Company. When ordering parts be sure to provide all relevant
information available including the name and part number of the equipment purchased. This information is
located on the cover of this product information package. Customer service hours are Monday through Friday
from 8:00 a.m. to 5:00 p.m. Eastern Standard Time. Customers can phone [phone] or toll free at (800)
457-5337. Fax toll free at [phone] or mail to:
Rogers Athletic Company
3760 W. Ludington Drive
Farwell, MI 48622

10
Rogers Athletic Company
3760 N. Ludington Drive
Farwell, MI 48622
www.rogersathletic.com
[phone]
[phone]
Fax toll free [phone]
PIP410353