HOW TO USE YOUR HAIRDRYER
1. Always ensure the switch is set to OFF position before plugging the unit into the power
outlet.
2. Use the high setting for drying hair and use low setting for styling.
3. If the hair dryer stops for any reason, turn it off at once and let it cool down.
4. Switch control
1=Low: low speed 1=Low: low warm temperature.
2=Middle: middle speed 2=Middle: middle hot temperature
3=High: high speed 3=High: high hot temperature
5. The concentrator & diffuser can be used on or without.
6. Switch off when finish using, and then remove the plug from the socket.
7. Slide the Power Button once to turn on the dryer. When turning the dryer on for the first
time, it will start at the lowest heat and speed setting. To turn off the dryer, slide the Power
Button once again.
NOTE: Each time you turn the dryer on, it will start on your last set temperature and speed.
8. To alternate between high and low speed settings, press the Speed Button once.
9. To change the temperature, press the Heat Button to reach the desired heat setting.
10. To activate cool shot function, press and release the Button A once. To deactivate it
press the button again.
ION FUNCTION
1．Protection Hair: Keeping the hair moisten, avoiding electrostatics and making the hair
easy to be dressed.
2. Sterilizing: Generated ion together with tiny ozone killing various viruses and bacteria.
3. Eliminating dust and smoke: Ion neutralize molecules of the dust or powder in the air
and protection them.
4．Promotes blood circulation faster, better for hair growth.
CLEANING AND MAINTENANCE
1. Make sure that the inlet and outlet grills are clear of dust and lint for proper operating
performance.
2. Your hair dryer is virtually maintenance free. No lubrication is needed.
3. Always remove the plug from the outlet and allow the dryer to cool before cleaning.
4. Twist (Figure 1) the filter cap anticlockwise to release it from the air intake of the dryer
body and take down horizontal (Figure 2). Use a soft cloth or a small brush to remove
dust and lint (Figure 3) that may have accumulated on the metal mesh. (You may clean
the filter every 15 days).
5. The hair dryer exterior may be wiped clean with a damp cloth.
6. Ready to use after reinstalling the removable black cover.
7. CAUTION: Never allow the power supply cord to be pulled, twisted or severely bent.
Never wrap the cord tightly around the dryer. Damage will occur at the high flex point of
entry into the hair dryer, causing it to rupture and short. Inspect the cord frequently for
damage. Stop use immediately if damage is visible, if the unit stops or if it operates
intermittently.
8. If the cord or the hair dryer is damaged or does not operate properly, please contact
