Rointe K series User manual

5. Checking the programming
04
V. Other information
By repeatedly pressing you can see the programming that is saved in the
radiator for each day. Pressing only once shows day one, twice shows day two and so on.
indicates that the radiator is working.
together for 3 seconds to lock the keypad.
Press &
together for 15 seconds to perform a factory reset & clear programming
Press &
Pressing for 3 seconds while in manual mode will take you to the LCDT contrast
and decrease it by pressing
You can increase the contrast by pressing
Press to scroll between the three modes.
For comfort mode the icon will appear and two dots will flash.
For Anti-frost mode the icon will appear and the dot will appear to bounce.
for how to to select Anti-frost or off as default.) Repeat this process for each hour you wish to
program. To finish the programming press or leave the radiator for 30 seconds
without pressing any buttons.
Use or to move to the first hour you wish to program.
I. Front panel buttons………………………………………………………………….……….01
II. Setting the time & day….…………………………………………………….…………….02
III. Manual operation: Setting the temperature.…..…..………....…………………..02
IV. Automatic operation: 1. The modes: Anti-frost, Economy & Comfort…....02
2. Setting the temperature for Comfort & Economy modes……………………...03
3. Selecting the days for programming…………..….…………………………………..03
4. Selecting the hours…………………………………………………………………………..03
5. Checking the programming……………………………………………………………....04
V. Other information…………………….………………………………………………….......04
I. Front panel buttons
ON/OFF
Menu
Increase temp. / day / time
Decrease temp. / day / time
Manual / Automatic mode
01
K SERIES QUICK PROGRAMMING GUIDE
K SERIES QUICK PROGRAMMING GUIDE
screen. The letters LCdt will appear.
For Economy mode the icon will appear and one dot will flash.
For the radiator to be off no icon will appear and the dot will appear to bounce. (See step 4

K SERIES QUICK PROGRAMMING GUIDE
02
II. Setting the time & day
for 3 seconds.
Press
The clock starts at midnight, represented by 00:00 (24 hour clock).
Day indicators (Mon to Sun)
Press and use the or to move to the correct minute
Press and use the or to move to the correct day
Press to finish
Use or to move to the correct hour
Ensure that the function indicator displays If once. is visible press
Use or to select the desired temperature
The mode will change automatically depending on the temperature you select.
1. The modes: Anti-frost, Economy & Comfort
To use Anti-frost mode whenever the radiator is not functioning in Comfort or Economy
Ensure that the function indicator displays
Anti-frost mode 8º
Comfort mode 20º to 30º
Economy mode 15º to 19.5º
mode press To de-actívate anti-frost mode press
The radiators have three temperature modes. If once. is visible press
03
the day indicators will start flashing and the display will flash SEL 1.
4. Setting the hours
Ensure that the function indicator displays
for 3 seconds Press
The Comfort mode indicator will flash
once. Press
Use or to move to the desired temperature. This will be the temperature
whenever you choose Comfort mode in the programming.
The Economy mode indicator will flash
Use or to move to the desired temperature. This will be the temperature
whenever you choose Economy mode in the programming.
Press
SEL 1, SEL 2, SEL 3…..SEL,7.
to select a day. Its icon will stop flashing. More than one day can be selected. Press
Use or to move across to the relevant day and to select it.
Once you have selected all the days that will share a common program you are ready to
set the mode for each hour that you want the radiator to heat.
You can move through the days by using or and the text will change
The clock starts at midnight, represented by 0 (24h clock).
Press
3. Selecting the days for programming
2. Setting the temperature for Eco & Comfort mode
Steps 2, 3 & 4 must be completed consecutively. If you exit programming mode
during the process begin again at step 2.
II. Manual operation: Setting the temperature
IV. Automatic operation