Roland S-4000S User manual

801 West Orchard Drive, Suite 3
Bellingham, WA 98225
WWW.ROLANDSYSTEMSGROUP.COM
TOLL FREE: 800.380.2580 • FAX: [phone]
Architects & Engineers Specication
The digital audio transmission system
(Digital Snake) shall be a modular system
that can be congured in groups of 8
channels up to a maximum of 40 channels
per transmission cable. The system shall
consist of one Input or Stage Box Module,
with XLR or AES/EBU inputs, as well as
the option for multiple line-level “returns” or
Outputs. It will also consist of at least one
Output or Front-of-House (FOH) Module
that will have line level outputs as well as
the option for some line level inputs or
returns.
The modularity shall allow for different
congurations of the Input Module or Stage
Box including 40 inputs and 0 outputs, 32
inputs and 8 outputs, or 24 inputs and 16
outputs. The transmission cable between
the Input or Stage Box Module and the
Output or FOH Module(s) shall be a Cat5e
or Cat6 cable.
The inputs shall be of very high quality
and accept both line and microphone level
inputs with individually selectable phantom
power. The input gains or trims for the
inputs as well as their phantom power
settings, shall be remotely controllable from
the Stage or FOH Module using either a
hardware remote control unit or a computer.
The gain level shall be controllable in 1 dB
steps. The system shall also offer at least 10
preset memories of different congurations
of the input gain and phantom power
settings.
The audio protocol for a 40-channel system
shall have a 96 kHz sampling rate, provide
24-bit audio, and have a protocol latency of
375 microseconds from the stage unit to the
FOH unit. The system shall have redundant
Ethernet ports allowing the connection of
two Cat5e or Cat6 cables from the Input
unit to the FOH unit. The system shall be
designed to switch automatically from one
cable to the other in the case of damage to
one of the cables. The system shall allow
the user to copy or “split” the input sources
to several Output Modules using a fast
gigabit Ethernet switching hub.
The system shall be the Roland S-4000S
Digital Snake System.
S-4000S-3208 Stage Unit Dimensions
440
434.6
482
465
336265.4
57.176.257.1
266.4
440
434.6
365.8
386.7
482
465
132.5
57
133.8
S-4000H FOH Unit Dimensions
S-4000R Remote Control Dimensions
60.9
54.3
89.2
54.6
215
87.8
S-4000S Digital Snake System

801 West Orchard Drive, Suite 3
Bellingham, WA 98225
WWW.ROLANDSYSTEMSGROUP.COM
TOLL FREE: 800.380.2580 • FAX: [phone]
Architects & Engineers Speci cation
Accessories
32 in 8 out
Sample Rate: 96.0 kHz
Signal Processing: 24 bit
-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
110 dB
-80 dB
0.05 % or less
(Pad: On, Input Gain: +4 dBu, 22 to 20000 Hz)
-65 to -10 dBu (PAD: Off) -45 to +10 dBu (PAD: On)
(1 dB step, Max. +28 dBu)
Number of Channels
AD Conversion
DA Conversion
Frequency Response
Total Harmonic
Distortion + Noise
Dynamic Range
Cross Talk
PAD
Input Impedance
Nominal Output Level
Output Impedance
Network Latency
Equivalent Input
Noise Level (E.I.N.)
Residual Noise Level
(IHF-A, typ.)
Recommended Load
Impedance
20 dB On/Off
20 k ohms
+4 dBu, Max. +22 dBu
150 ohms
375 microseconds when using REAC cable only
(AD - REAC - DA Latency: about 1.2 ms)
-128 dB
-90 dBu
10 k ohms or greater
Number of Channels
Connectors
8 in 32 out
Frequency Response
AD Conversion
DA Conversion
-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Sample Rate: 96.0 kHz
Signal Processing: 24 bit
Sample Rate: 96.0 kHz
Signal Processing: 24 bit
Dynamic Range
Cross Talk
Nominal Input Level
Input Impedance
Nominal Output Level
Output Impedance
Recommended Load
Impedance
Residual Noise Level
(IHF-A, typ.)
Network Latency
Total Harmonic
Distortion + Noise
110 dB
-80 dB
+4 dBu, Max. +22 dBu
30 k ohms
+4 dBu, Max. +22 dBu
600 ohms
375 microseconds when using REAC cable only
(AD - REAC - DA Latency: about 1.2 ms)
10 k ohms or greater
-90 dBu
0.05 % or less (Input Gain: +4 dBu, 22 to 20000 Hz)
Input: 1 (DB-25 type, balanced, 8 channels)
Output: 4 (DB-25 type, balanced, 32 channels each)
REAC: MAIN, BACKUP (RJ-45 EtherCon type)
Remote Connector: 1 (RS-232C, DB-9 type)
MIDI Connectors: IN, OUT (5-pin DIN type)
Indicators
AC Power Supply
DC Power Supply
Power Consumption
Dimensions
Accessories
Operation Temperature
Weight
(for an optional external
power supply unit;
Model S-240P)
Current Draw
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
+24 V (from optional external power supply unit : S-240P):
70 W
Power Cord, REAC Connector Covers, Ferrite Cores,
Connector Guard, Screws for Connector Guard
Installation Manual
0 to +40 degrees Celsius
+32 to +104 degrees Fahrenheit
9.4 kg, 20 lbs 12 oz
482.0 (W) x 386.7 (D) x 133.0 (H) mm
19 (W) x 15-1/4 (D) x 5-1/4 (H) inches
6 A
Nominal Input Level
Sample Rate: 96.0 kHz
Signal Processing: 24 bit
Connectors
Indicator
EXT Indicator (External Power Supply Unit)
INT Indicator
REAC Indicator
CTRL Indicator
ALARM Indicator
MUTE ALL OUTPUTS Indicator
Power Cord, REAC cable (10 m, Cat5e crossover cable)
Adhesive-backed number label sheets, REAC Connector Covers
Ferrite Cores, Owner's Manual
AC Power Supply
DC Power Supply
Power Consumption
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
+24 V (from optional external power supply unit : S-240P):
130 W
Phantom Power
Dimensions
+48 V / 14 mA (each input on SI-AD4, remote controlled)
482.0 (W) x 336.0 (D) x 266.4 (H) mm
19 (W) x 13-1/4 (D) x 10-1/2 (H) inches
Weight
Operation Temperature
17.0 kg, 37 lbs 8 oz
0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit
6 A
Input: 32 (XLR type, balanced, phantom power, 4 ch input module x 8)
Output: 8 (XLR type, balanced, 4 ch output module x 2)
REAC: MAIN, BACKUP (RJ-45 EtherCon type)
Remote Connector: 1 (RS-232C, DB-9 type)
MIDI Connectors: IN, OUT (5-pin DIN type)
Current Draw
(for an optional external
power supply unit;
Model S-240P)
EXT Indicator (External Power Supply Unit)
INT Indicator
REAC Indicator
CTRL Indicator
ALARM Indicator
MUTE ALL OUTPUTS Indicator
* 0 dBu = 0.775 Vrms
* 0 dBu = 0.775 Vrms
S-4000S-3208 40CH I/O MODULAR RACK
S-4000H 8X32 FOH UNIT
Connector
Indicators
Power Supply
Dimensions
Weight
Operation Temperature
Accessories
Remote Connector: 1 (RS-232C, DB-9 type)
Supplied from connected device. (S-4000S, S-4000H; through the remote cable)
215.0 (W) x 87.0 (D) x 54.6 (H) mm, 8-1/2 (W) x 3-7/16 (D) x 2-3/16 (H) inches
0.8 kg, 1 lb 13 oz
0 to +40 degrees celsius, +32 to +104 degrees Fahrenheit
Remote Cable (3 m), Rack Mount Brackets, Installation Manual
CLIP Indicators, SIG Indicators, POWER Indicator, REAC Indicator, CTRL Indicator, Level Meter
S-4000R REMOTE CONTROL UNIT
S-4000 Digital Snake System Main Specifications
S-4000S Digital Snake System