Rollei Security Cam Mini User manual

Überwachungskamera Mini
Kurzanleitung
Security Cam Mini
Quick Start Guidewww.rollei.com

FRONT OF THE CAMERA
BACK OF THE CAMERA
Light Sensor
microSD Slot
Reset Button
Speaker
Power Supply
via USB Port
Lens
Power LED
Microphone
14

SET UP OF THE CAMERA
1. To set up the camera, please download the free application
”Rollei SafetyCam“ from the App Store or the Google Play Store
first and install it on your smartphone / tablet (Fig.1). Open the
app. In the next step, choose your camera model (Rollei Security
Cam Mini) and click on the top right on „Next“ (Fig.2).
« Fig. 1
Fig. 2 »
15

SET UP OF THE CAMERA
2. Set up the Security Camera Mini first, select the function „Regis-
ter“ and create a new user account. After registration, the setup
Wizard opens (Fig. 3). Follow the instructions of the next 4 steps
that appear on your smartphone / tablet:
1. Preparation
2. Wireless
3. Cloud
4. Complete
• Preparation: Connect the
smartphone / tablet via Wi-Fi
with the camera network
(CamSetup).
• Wireless: Enter the data of your
home network.
• Cloud: Connect the smartphone / tablet again with your home
network.
• Complete: Wait until the camera setup is completed.
Once these 4 steps have been completed, you have direct access to
your Rollei Security Cam Mini. You can access by smartphone / tablet
via the app on the camera, or from any computer, by going to the
page www.Rollei-Cloud.com.
Fig. 3 »
16

SET UP OF THE CAMERA
Log in with the user account that you have created during the in-
stallation. You get all the installed cameras displayed (Fig. 4) and can
individually select up to 4 cameras simultaneously and open these in
the split-screen view (Fig. 5), or select a camera individually (Fig. 6).
« Fig. 4
Fig. 5
« Fig. 6
17

TECHNICAL DATA
Image sensor
Focal-length
Min. illumination
Lens
Viewing angle
Video
Video format
Supported protocols
Supports OS
WIFI standard
WIFI security
Dimensions
Power supply
Operating temperature
Operating humidity
Memory card
¼“ Color CMOS sensor, 1280x720P
F: 2.5 | f: 2.8 mm
0.5 Lux
Glass lens
110°
1280x720p (25 fps), 640x480,
320x240
FLV (H.264)
HTTP/DHCP/TCP/UDP/FTP/SMTP/
DDNS/UPnP
iOS 7.x or higher,
Android 2.3 or higher
IEEE 802.11 b/g/n
WEP, WPA, WPA2
57 x 67 x 112 mm
DC 5V, 2.0 A
0° – 55° C
20% – 85% (non-condensing!)
microSD cards up to 32GB
18

POTENTIAL LEGAL INFRINGEMENTS
Observe the following information for using the IP surveillance
camera:
Copyright
Generally every person owns his/her own image. According to the
copyright law, images may only be published without the consent of
the respective person if the person appears only as a person embel-
lishment to a landscape image, or a location as a public place. The
answer to the question of whether a person is embellished depends
on the individual circumstances. For reasons of legal certainty per-
sons should be informed in all cases in which images are taken with
the IP surveillance camera from which persons can be identified (see
also section “Duty of notification”).
Protection of privacy
Shown images may not infringe the privacy of others. Do not point
camera onto the garden or entrance door of your neighbour, even if
these locations are visible from your known home or public locations.
This does not entitle you to publish respective photos or videos.
Personal determinability
Personal determinability exists, where it can be determined that a
certain person was at a certain place at a certain time. The person can
also be identified by a personal identifier such as a vehicle registra-
tion plate. Personal determinability of persons must be absolutely
avoided.
19

POTENTIAL LEGAL INFRINGEMENTS
Surveillance cameras at the place of work
Surveillance of workplaces is subject to particular strict regulations.
Employers should not use surveillance cameras at the place of work
unless potential legal infringements can be fully excluded. Please
inform yourself about the applicable laws in your country.
Traffic surveillance cameras
When using surveillance cameras facing traffic, it is recommended
to configure the location and view of the camera in such a way
that road users are identifiable from any images through a vehicle
registration plate. Road users could also be determined from lettering
on vehicles.
Duty of notification
Where a personal identification of persons cannot be excluded, a
clearly visible notice concerning the surveillance camera must be
erected at all accesses to the monitored area. Passers-by must also
be informed that by entering the monitored area they give their
permission to pictures/videos being taken so that if they do not wish
to give their consent they can avoid the picture/video being taken by
not accessing the area. The voluntary nature of the declaration must
be observed. If the camera trap is located at a point persons have to
pass to reach their destination (e.g. entrance of a sight), no consent is
deemed to have been given as no voluntary nature applies.
20

LICENSE INFORMATION
License- and Sourcecode information: The product includes
software components, which have been licensed by the rights holders
as free software or open source software. You’ll find the copyright
notes and license texts here: http://gpl.rollei.com
You can obtain the source code of these software components on a
data carrier from us by sending a request to our customer support
department at the address below within three years after sale of the
product and for at least as long as we offer support and spare parts
for the product:
Rollei Service Germany
Denisstraße 28a, D-67663 Kaiserslautern
(or by e-mail to: [e-mail])
Subject: “Source code, Security Cam Mini”
To the extent the product includes proprietary software components,
which stem from us and are linked with a library under the GNU
Reader or Library General Public License, we allow the reengineering
of these proprietary software components for debugging of changes
and for making changes for your own use. Passing on changes of pro-
prietary software components, on the other hand, is not permitted.
Liability and warranty information of the rights holders:
”This program comes with ABSOLUTELY NO WARRANTY; for details
see Sec. 11 and 12 of the GNU General Public License, Version 2.“
”This program comes with ABSOLUTELY NO WARRANTY; for details
see Sec. 15 and 16 of the GNU General Public License, Version 3.“
”This program comes with ABSOLUTELY NO WARRANTY; for details
see Sec. 15 and 16 of the GNU Lesser General Public License, Version
2.1.“
21

CONFORMITY
The Manufacturer hereby declares that the CE marking was applied
to the Product Rollei Security Cam Mini in accordance with the basic
requirements and other relevant provisions of the following CE
Directives:
2011/65/EC RoHs Guideline
2004/108/EC Low Voltage Directive
1999/5/EG R&TTE Guideline
The EC Declaration of Conformity can be requested from the address
specified on the Warranty card.
Correct disposal of product:
The adjacent symbol indicates that electrical and elec-
tronic equipment may not be disposed of in domestic
waste in the EU. Please use the returns and collection
points of your local council or contact your dealer you
purchased the product from.
This prevents potentially harmful effects on the en-
vironment and health as a result of incorrect disposal.
For further information contact the respective
department of your local council.
DISPOSAL
22

WARRANTY AND SERVICE
Our service outlets will be happy to assist you in case of problems
with the operation of the device or with any queries and problems.
The device comes with a 2-year manufacturer’s warranty. Please see
the enclosed Warranty Card for details.
Please contact our hotline prior to returning a defective device.
Manufacturer: Rollei GmbH & Co. KG
Tarpen 40/Gebäude 7b, D-22419 Hamburg
Service Hotline [phone]
Return Service: Rollei Service Germany
Denisstraße 28a, D-67663 Kaiserslautern
23

Distribution:
Rollei GmbH & Co. KG
Tarpen 40/Gebäude 7b
D-22419 Hamburg
Service Hotline:
[phone]
Return Service:
Rollei Service Deutschland
Denisstraße 28a
D-67663 Kaiserslautern
www.rollei.com
www.rollei.de/social
www.rollei.com/social