RollMAN MP 8015 E User manual

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 1/32
ROLLMAN
USER MANUAL
CLOTHES IRONING MACHINE WITH ROLLER ’’ROLLMAN’’ MP 8015 E
MODEL-80151000012 E

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 2/32
ROLLMAN
IMPORTANT INSTRUCTIONS FOR HANDLING, MAINTENANCE AND SAFETY
Before first use of the machine for ironing clothes with a roller (hereinafter
referred to as ironing machine) please read these instructions for use and
maintenance in order to avoid accidents, injuries and damage to your device.
Table of Contents:
Important instructions for equipment safety 3
The main parts of the machine for ironing 7
Control board of the ironing machine 8
Moving the ironing machine 8
Assembly and disassembly of the ironing machine 9
Safety lever 9
Before the first use of ironing machine 10
Power supply cable 10
Protecting roller from dust 11
Preparing the operating zone (Workspace) 11
Preparation of materials for ironing 12
Moisture of the material for ironing 12
Sorting 13
Ironing 14
Turning on and off the machine for ironing 14
Setting the temperature for ironing 14
Selection of rotational speed of the roller 15
The process of ironing material 16
Adding materials for ironing 17
Removing the inductor of material for ironing 17
Holder for ironed material 18
General tips for ironing 18
After ironing the material 18
Turning off the machine for ironing 18
Disposal of ironing machine longer period 19
Tips for ironing different materials 19
Tablecloths 19

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 3/32
ROLLMAN
Napkins, hand towels 20
Sheets and blankets 20
Pillowcases 20
Quilt sheets 20
Shirts 21
Trousers 23
Skirts 23
Cleaning and maintenance of machine for ironing 24
Cleaning ironing element (heating plate) 24
Clean the body of machine for ironing 24
Cleaning and replacing the roller envelope 24
Replacing the roller envelope 25
Frequently Asked Questions 27
Post sales support 28
“Rollman” support 28
Connection to electricity 29
Technical data of machine for ironing 30
Help protect the environment 30
Packaging disposal 30
Disposal of old, out of use machine for ironing 31
Identification label 31
IMPORTANT INSTRUCTIONS FOR EQUIPMENT SAFETY
Purpose of the machine for clothes/laundry ironing
•The main purpose of ironing machine is for domestic use, and if required by
users, it can also be used in other conditions in accordance with these instructions.
Ironing machine is designed for ironing fabrics.
•Ironing machine is to be used only for predicted purpose and as described in
this manual.
•People who do not have adequate physical, nervous and mental ability or
relevant experience in the use of the machine should be using the machine only
under the supervision and instructions of trained and experienced persons.

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 4/32
ROLLMAN
Technical safety
•It is not envisaged for any person to perform alterations, repairs or any
service intervention on the machine for ironing. These activities can be implemented
only by the authorized service company ''Rollman'', in accordance with national and
local regulations for safety and security and the instructions of the company
''Rollman'' on the work of technical service for inspection, repair and adjustment of
the device.
•Repairs and other work on the machine for ironing by unauthorized persons
may lead to the occurrence of dangerous events, injuries and losing the
manufacturer's warranty.
•After unpacking the machine for ironing check the machine for any visible
damage.
•Damaged machine for ironing is not to be used, since using such equipment
may lead to hazardous events and injuries. In this case, do not insert the power
supply cable to the socket on the wall, but immediately contact the authorized
service company ''ROLLMAN''.
•In case the power supply cable is damaged contact the authorized service
center ''Rollman'' - to carry out replacement of the cable.
•This ironing machine must be connected to a grounded outlet in order to
guarantee electrical safety, because only thus one can provide high-quality
grounding. If you have any doubts on this matter contact the authorized electrician
who can check your electrical installations.
•Before connecting the machine for ironing make sure that data on the
identification label (located on the bottom cover of workbench) are compliant to
your electrical network. If any doubt, contact the authorized electrician.
•Do not use extension cords to connect the machine for ironing laundry to
electricity. Extension cords do not guarantee a secure power supply of the machine
for ironing!
•Damaged parts of the machine for ironing must be replaced only with
original spare parts of company ''ROLLMAN''.
•Only if original parts have been incorporated by qualified personnel, the
manufacturer guarantees the security and functionality of machine for ironing
''Rollman''. During warranty period repairs can be done only by a qualified service
technician.

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 5/32
ROLLMAN
•Machine for laundy ironing is completely sepatated from electrical grid:
When the switch on the control board is off;
When the power supply cable is unplugged;
When the appropriate fuse is removed from the grid.
•For proper operation of equipment for ironing one should not damage,
remove or bypass the safety and / or control elements of machine for laundry ironing
''ROLLMAN''.
•Do not use the machine for ironing when the casing and envelopes are
damaged or dismantled, and there is the opportunity to come into contact with parts
under voltage and moving parts which can cause injury.
•This machine for laundry ironing is not intended for use in vehicles, ships,
aircraft, road vehicles or vehicles for recreation and other purposes. However, under
certain conditions, it is possible to install these devices into the said transportation
means. For these specific requirements, please contact the technical service of
company ''ROLLMAN''.
Use of the laundry ironing machine
•CHILDREN AGED 8 YEARS AND OLDER, PERSONS WITH REDUCED PHYSICAL,
MOTOR OR MENTAL CAPABILITIES, PEOPLE WITH LACK OF EXPERIENCE AND LACK OF
TRAINING COULD USE SUCH DEVICES IF THEIR SUPERVISION IS PROVIDED OR THEY
WERE GIVEN INSTRUCTIONS RELATING TO THE SAFE USE OF THE MACHINE AND
ADVISED HAZARDS ARISING FROM IT. CHILDREN MUST NOT PLAY WITH THIS TYPE OF
DEVICE. THEY MUST NOT BE CLEANED AND BE SUBJECTED TO USER MAINTENANCE
BY CHILDREN, WITHOUT PROPER SUPERVISION.
•The operator on ironing machine must have appropriate clothing. Using the
device with clothes with stripes, comfortable clothes with wide sleeves, apron, etc.
can be dangerous. Such clothing may be caught by a roller and in this case it may
result in injury. Therefore, when using the device, avoid the aforementioned
clothing.
•Before first ironing, remove the jewelry (necklaces, pendant earrings, etc.)
and firmly fasten long hair in a ponytail.
•Do not allow children to play with the machine for laundry ironing, to stay in
its vicinity or use it.

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 6/32
ROLLMAN
•In case of power failure during ironing the material for ironing, pull back
the lever on the left side of the workbench in the side cover. Ironing element
(heating plate) will automatically rise from the roller so that you can remove the
material being ironed from the roller, in order to avoid overheat and damage or
ignition due to prolonged contact with the hot plate.
•When the ironing element is heated, there is a risk of burns:
When touching the ironing element;
When you foot press the board of the stand of ironing machine for
approaching of ironing element to the roller and the roller starts operating, you
must not find your fingers between the raised ironing element and the roller.
•When using the machine for laundry ironing, avoid putting things over
theironing element, i.e. the heating plate cover.
•Never leave things over the hot ironing element i.e. ironing element cover
because there is a risk of pre-heating and ultimately of fire.
•Pressed materials can temporarily be put over the holder for ironed material,
fit for this purpose. Put the holder back to its original position after use. Be careful
not to overload the holder with large amount of pressed material since it may cause
instability of the device.
•Unplug the ironing machine on the switch before removing the power supply
cable from the wall outlet. When disconnecting the power cable, pull the plug rather
than the cord.
•Do not place the power cord over the cover of hot ironing element because it
may damage the cable, and then cause electric shock. Use the cable guides on the
machine for ironing to secure its position.
Additional equipment and parts
•You must use only original accessories and parts for ironing machine
approved by the company ''Rollman''. If you are using another accessory and parts,
the company ''Rollman'' does not guarantee the performance of machine for ironing
and is not responsible for the use of the machine for ironing and may revoke a given
factory warranty.

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 7/32
ROLLMAN
SAVE THESE INSTRUCTIONS AND PERIODICALLY REMIND YOURSELF TO
INSTRUCTIONS AND CONDITIONS OF USE OF THE LAUNDRY IRONING MACHINE.
THE MAIN PARTS OF THE MACHINE FOR IRONING
1. Control board
2. Heating plate for ironing
3. Setting the temperature
4. Finger protection
5. Roller with envelope
6. Inductor of material for ironing
7. Holder for pressed material
8. Workbench for pressed material
9. Power supply cable
10. Foot board of the machine stand
11. Handle for assembly / disassembly of machine
12. Safety lever

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 8/32
ROLLMAN
CONTROL BOARD OF THE IRONING MACHINE
1. Switch for Turning on and off the
machine for laundry ironing
with incorporated lights
indicating that the machine is
plugged in
2. Indicator showing that the left
and right group of heators are
turned on
3. Rotary knob for stepwise
selection of number of
rotation/speed of the roller
Moving the ironing machine
•To facilitate the movement of
the machine within the working area
there are in 4 wheels on the stand of the
machine. Never move the machine when
it is in the working position and when the
power supply cable is in the socket on
the wall, as this may cause damage to
the power cable and turning over the
device. Machine for ironing shall be
moved only when the workbench of the
roller is in a vertical position (see Figure).
•Take the machine by one hand to
the workbench, and another to the lower
part of the coupling (as shown in Figure)
and push or pull in the desired direction.
While moving the device, avoid carpets
and doorsteps. When over doorstep
slightly tilt the device toward you and
push it so the wheels are placed on the
doorstep.

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 9/32
ROLLMAN
Assembly and disassembly of the ironing machine
•Handle (interlock) for
transferring the workbench from the
vertical to horizontal position and vice
versa is located on the underside of the
workbench.
Safety lever
•Safety lever serves to separate
ironing element from the roller in case of
power failure.
•To bring the workbench to a
horizontal position, and prepare the
device for use, pull the lever and lift the
desk to a horizontal position until you
hear a click that confirms that the desk is
locked in a horizontal position (see
Figure).

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 10/32
ROLLMAN
•To bring the workbench in a
vertical position, or prepare the
machine for ironing to be moved,
pull the lever (interlock) and press
the desk until it reaches the vertical
position (see Figure).
BEFORE THE FIRST USE OF IRONING MACHINE
Power supply cable
•Power supply cable is wrapped
and hung on the back, below the
workbench on a vertical column of the
device.
•Unwrap the Power supply cable,
but do not yet turn it into the wall outlet

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 11/32
ROLLMAN
Protecting the roller from dust
•First check the position of the
buttons for temperature control.
Buttons should be in the zero position
("off").
•Then turn on the power supply
cable into the socket and switch on the
device. Ironing element (heating plate)
will automatically rise from the roller.
•Now you can draw roller
protection against dust.
Preparing the operating zone (Workspace)
•Place the following near the device:
Cart with the material you intend to iron should be on the left side of the
device.
Area for disposal of pressed material should be on the right side of the device
(for example, a chair or a table of appropriate height).

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 12/32
ROLLMAN
•T-shirts, overalls, blouses, etc., should immediately after the ironing be
disposed on a hanger.
•Small ironed material can be placed over the holder for ironed material.
•If necessary, the material for ironing before the ironing should be moisten
using the appropriate spray.
•Preferably for sitting you should use a chair that is adjustable in height.
•Ironing machine should be placed on a horizontal surface so as to prevent its
movement due to slope of the floor.
Preparation of materials for ironing
•For easy and quick ironing of material it is very important to properly prepare
the material that you want to iron.
•Before ironing, ironing materials should be:
moisten
sorted by fabrics type
set and, if necessary, folded into shape and form in which they will be ironed.
Moisture of the material for ironing
•Materials should be sufficiently moist (about 18% moisture in the laundry),
so that on the first pass through the heated machine at the appropriate temperature
they may be ironed out and dried.
•Moisten the material as you would for hand ironing. To equalize the moisture
content it is desirable to moisten them a few hours before the start of ironing. The
material should be wrapped to preserve their humidity.
•If you use a laundry dryer, select the degree of drying that is designed for this
type of machine for ironing clothes.
•If you have a short time available to prepare for ironing, material can be
moistened with warm water.

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 13/32
ROLLMAN
Sorting
•Sort the material by fabric type and the amount of heat required for their
ironing.
•Start ironing at a lower temperature and gradually increase the temperature
of the heating plate, depending on the type of fabric to be ironed.
•Avoid ironing starched things because it can lead to deposition of starch at
the ironing element (heating plate).
Temperature
Type of fabrics
Mark on the knob
Minimum
Perlon, nylon
Medium
Wool, silk
Maximum
Cotton, linen
•Place the wet material into shape as usual. Large items such as tablecloths,
bedding, etc. should be folded along the width which can pass through the roller.
Note the following:
•When using a new machine for ironing clothes and when there are bumps on
the roller, they will be flattened after the first few hours of use of the machine for
ironing clothes.
•In case that sensitive materials for ironing for the first time have not been
well drawn under the roller for ironing and not are not well ironed out, repeat the
ironing.
•If you use a new roller sleeve, wash before use at a temperature higher than
60 °C.
Type of fabrics
Preparation of materials for ironing
Silk
Wrap in a damp cloth to avoid traces of water
Synthetic nylon,
polyester, etc.)
Materials should be slightly wet to dry
Wool (e.g. Trousers)
Press the material under wet cotton cloth
Cotton
The material should be slightly wet
Sheets
The material should be very wet

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 14/32
ROLLMAN
IRONING
Turning on and off the machine for ironing
•Machine for laundry ironing is
operated by pressing the main switch
with signal light indicating that it is on.
Setting the temperature for ironing
•Ironing temperature is set by
means of the two rotating knobs for
temperature control which is provided
on the cover of the heating plate.
•Each knob is intended for
switching on and setting of a group of
heating elements (left and right), which
exchanges heat to the respective half of
the ironing element (heating plate).
•To turn on the heater and adjust
its operation you may select:
heating only the left half of
ironing element (heating plate)
heating only the right half of
ironing element (heating plate)
heating of the entire width of
ironing element (heating plate).

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 15/32
ROLLMAN
•Ironing element temperature
is set of using corresponding rotary
knob of thermostat as shown in the
Figure.
mark Heaters are off
mark Temperature of
ironing element to app. 95°C.
mark Temperature of
ironing element to app. 130°C.
mark Temperature
of ironing element to app. 175°C.
When the knob is in the final
position, temperature of ironing
element is 185°C.
•When the heaters are on and
give off heat the ironing element has
lit the corresponding indicator on the
control board.
•When the thermostat turns
off any heater because of achieved set
temperature of ironing element in the
zone covered by the heater, then the
indicator does not light.
•When the ironing element
temperature falls below the set the
heaters will turn on automatically and
then control indicator will light up.
Selection of rotational speed of the roller
•You can adjust 5 speeds of roller, tentatively from 4 to 10 rpm or from 1,9
m/min too 4,7 m/min.
•Lower speed of the roller allows for easier ironing of complicated materials
such as shirts and blouses. Also, it is best to choose low speed roller when ironing

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 16/32
ROLLMAN
multiple folded items and thick things, then it may take more than one pass through
the rollers to get well-ironed and dry matter.
•Thin, single materials, e.g. handkerchiefs, cloths for dishes, etc. can be ironed
at high speed of roller.
•Set the button to adjust the speed of the roller to the desired speed.
•Wet materials are ironed with lower speed roller.
Process of ironing material
•Process of ironing material is managed by means of foot board on the stand
of machine which has three positions:
Raising ironing element (heating plate): remove the foot from the board, and
it will move to its upper position,
Pressing the material to the roller: press board to the end and then lift on the
heel the front part of the foot. Ironing element (heating plate), gets closer to the
roller and the presses the material to the roller. Roller does not rotate.
Ironing: press board to the end, starting rotation of the roller to the desired
speed. Ironing is done while holding down the board to the end.
•For work it is recommended to mear footwear with a soft surface (training
shoes, slippers ...) with no rough or sharp parts so as to prevent mechanical damage.

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 17/32
ROLLMAN
Adding material for ironing
•Place the material you want to
iron in the inductor of material
(induction plate), so that it is
perpendicular to the edge of inductor
and with no wrinkles. Then press board
to the end, starting rotation of the roller,
always keeping your hands away from
ironing element (heating plates, so that
the edge of the material for ironing can
be caught by ironing element (heating
plate). Hold the board pressed, until you
pass the whole length of the material for
ironing.
Removing the inductor of material for ironing
•Inductor for ironing material may be removed if you wish to iron materials
with circular shape, e.g. skirts.
•The screw on the left lateral side of the roller holds the bracket of the
material induceris to be loosened and bracket of the inducer is to be detached
(bottom figure).
•Lift the inducer of material upward from the holder on the right side of the
roller and then pull it toward the left side of the roller.
•After removing the material inducer return the screw back into place.

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 18/32
ROLLMAN
Holder for ironed material
•Pressed materials can be placed over the removable bracket/holder to
prevent creasing. Be careful not to overload the holder as it may cause instability of
the device.
General tips for ironing
To avoid crease of the pressed material stop the roller, gently pull the
material from the back of the roller to completely come out of the roller.
If necessary, dampen the material again with a wet cloth or spray water.
If possible, always use the whole width of the roller for ironing otherwise
certain parts will dry out and lose their elasticity.
For small materials such as wipes, pass the material alternately through
different zones across the width of the roller.
Material with buttons must be turned so that the buttons are facing to the
roller, so that during the ironing they can be pressed into the elastic envelope of the
roller.
To protect ironing element (heating plate) avoid ironing material with
temperature volatile and large buttons and other parts that are not heat resistant.
To prevent scratching the surface of ironing element (heating plate) caused
by zippers, metal buttons and other metal parts on double material for ironing, cover
them with a damp cloth.
When you are at the end of the ironing reduce the temperature or turn off
the heaters.
Continue the ironing of small materials for ironing at a lower temperature. In
this way you'll save electricity.
AFTER MATERIAL IRONING
Turning off the ironing machine
Unplug the ironing machine by pressing a switch on the control board.
Reduce the temperature of the heater to a minimum.
Pull the power supply cable from the wall outlet.

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 19/32
ROLLMAN
Disposing the machine for ironing for longer period
If the machine for ironing is to be stored for a longer time (several days), then:
Let ironing element (heating plate) cool completely and then assemble the
machine by pulling the lever (interlock) and bringing the work bench in a vertical
position.
Roll up the cord and put it into place.
Put a cloth protection that protects the device against dust.
TIPS FOR IRONING DIFFERENT MATERIALS
Tablecloths
At the beginning of ironing avoid making the edge of the tablecloth in the
middle.
Place the tablecloth crosswise so that on ends are hanging on the left and
right over the roller for ironing, and the middle part of the tablecloth is in the
operation part. Iron the tablecloth middle part.
Fold the tablecloth in half so that the edges of tablecloth are aligned. Ironed
middle part of tableclothn hangs over the left end of the roller so as to prevent
crease of pressed part. Put the folded edge ends of the tablecloth to iron, first on one
side then on the other side.

______________________________________________________________________________________
User Manual for Clothes Ironing Machine MP 8015 E 20/32
ROLLMAN
Napkins, hand towels
Place the ironing material in sufficient surface of the fabric to the inducer.
This will prevent the fabric to lose its shape and facilitate its guidance. Put material
for ironing diagonally between the roller and ironing element (heating plate) and if
necessary, hold it, and then repeat the process.
When ironing material use the entire width of the roller.
Sheets and blankets
These materials can be ironed in the same manner as tablecloths, or if their
length is acceptable, fold the material by length and then iron both sides.
If the material has decorations, embroidery, and the like, then first iron the
material by passing it in one direction, and then repeat ironing in the other direction.
Pillowcases
Place the pillowcase on the inducer, place it beneath ironing element
(heating plate) and iron it in a single step. If in the open end of the pillowcase there
are buttons, place them towards the roller.
Quilt sheets
If the quilt sheet at the open end
has buttons iron that end first. Note:
Place the buttons towards the roller.
Start ironing the material
carefully guiding the sheet over the left
end of the roller, taking care not to
damage any button.