Rolls DU30b Instruction Manual

DU30b Audio Ducker
Connection guide
Rolls Corporation
Salt Lake City, UT
8/19
Made in USA ww.rolls.com
What's in the box?
1 - Made in USA DU30b
1 - 15V power supply PN PS27s
1 - This owners manual
Made in USA ww.rolls.com
CONNECTION:
DESCRIPTION:
- Automatically ducks music under announcements
- Perfect for restaurants and small clubs
- Clean, Quiet Mic Preamp
The DU30b is a microphone preamp and back-
ground music preamp. When an announcement is
made into the microphone, the music is automati-
cally “ducked” under the announcement. Then the
music is brought back to it’s previous level.
SPECIFICATIONS
Frequency Response 20 Hz - 40 kHz
Input Impedance 100KΩunbalanced, 600 Ωbalanced
THD + Noise <0.03% typical
Noise Floor -78 dB
Indicators Power LED
Input/Output jacks XLR balanced input
RCA unbalanced input and output
Size: 4" x 4" x 1.5"
Weight: 1 lb. (.5 kg)
Power: 12 - 15 VDC 500mA
5 x 1.2 mm DC Jack - Center Negative
If you are using a condenser microphone,
carefully connect the two Phantom Power
jumper pins together. Set the level of the
music signal (Line In) for a comfortable level.
Speak into the microphone and adjust the Mic
Level for a comfortable level, then adjust the
Sensitivity so that the music is muted when
speaking with a normal voice. Set the Release
Time control for the amount of time you wish
for the Aux In signal to return to normal. Set
the Duck Depth control for the amount of Aux
In signal reduction you want when the Mic or
Alternate signal is present.
- Restaurants
- Clubs
- Schools
... Anywhere you need to duck a paging signal under a
background source.

DUCK
SENSITIVITY
MIC
LEVEL
pwr
MIC
LINE
RELEASE
TIME
DUCK
DEPTH
phantom
pwr
15 VDC
+
-
INPUTINPUT INPUT
MIC AUX LINE
OUTPUT
DU30b
AUDIO DUCKER
Mic
Preamp
fastslow
-6 dB -70 dB
www.rolls.com
ON
DUCK DEPTH: Adjusts the amount
of background signal (or Line In)
reduction - fully counter clockwise
the signal is reduced 6 dB, fully
clockwise the signal is reduced 70
dB.
PHANTOM PWR: Switch for
engaging the +15 volt phantom
power to the microphone input .
RELEASE TIME: Adjusts the
amount of time for the
“ducked” signal to return to
its normal level. Counter-
clockwise; slow - Clockwise;
fast.
MIC/LINE: When
pressed in, the gain
of the XLR Mic In is
reduced by 30 dB.
OUTPUT: Stereo RCA jacks
for connection to the sys-
tem’s ampliers.
DUCK SENSITIVITY: The Threshold at which
“ducking” begins. When the microphone level
reaches the threshold, the signal present at
the Line In jacks is reduced until the an-
nouncement is over, then the Line In signal
returns to its previous level.
DC jack for connection to
the included Rolls PS27s
power supply
MIC IN: Female XLR jack for
connection to a dynamic or
condenser paging micro-
phone.
LINE IN: Stereo RCA jack
for connection to the
stereo signal source to be
“ducked” such as a tuner,
CD player or cassette
player.
AUX IN: Stereo RCA
jacks for connecting
to a source dierent
from the Mic In as
the master signal.
MIC LEVEL: Adjusts
the amount of gain
in the Mic In circuit.
A NOTE ON THE DU30b THRESHOLD, WITH THE SEN-
SITIVITY CONTROL FULLY CLOCKWISE: If the control
(paging) signal is on the XLR input, then ducking
begins (the threshold is) at -40 dB when the Mic/
Line switch is set to“Mic”, and 0 dB when the switch
is set to “Line”. If the control signal is on the RCA
input, ducking begins at -40 dB.
WE RECOMMEND TURNING THE DUCK SENSITIVITY AND DUCK DEPTH
KNOBS BOTH FULLY CLOCKWISE (ALL THE WAY UP) TO START. THIS IS THE
HIGHEST SENSITIVITY AND MOST DUCKING AVAILABLE ON THE UNIT.