Rompa 23417 User manual

1. Product Name
Wheeled Frame for Compact Mobile Interactive Floor
Projection
2. Product Code
23417
3. Colour
Likely to be as shown (right)
4. Brief Description
Optional trolley for projecting onto a table top or
wheelchair tray
5. Contents
1 x frame
6. Snoezelen® Stimulations
Not applicable
7. Best Use
Use with 23386 Compact Mobile Interactive Floor
Projection.
8. Compatible ROMPA® Products
23386 Compact Mobile Interactive Floor Projection

9. Starting Up
Attach the projection unit to the plate at the top of the stand.
Use the shelf for the keyboard.
10. Detailed Description
Optional trolley for projecting onto a table top or wheelchair tray
11. Safety
Always supervise the use of this product.
This is for moving the Compact Mobile Interactive Floor Projection and should not be
used with other products. Do not place anything else on the stand.
Do not lean on the stand or exert pressure onto it.
12. Technical Specification
Size: 95 to 150cmH, 66cm diameter at the base

13. Installation
1. Use the four wing nuts to secure the
projection unit to the plate at the top of the
stand. There are four screws at the back of
the projection unit.

2. Use the shelf for the keyboard.
3. Adjust the stand height as required using the lever on the pole of the stand.
14. Care and Maintenance
1. Move the frame carefully using the wheels at the base. Don’t forget to unplug the
projection unit from the wall socket as necessary.
15. Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received –please contact us at
[email protected]
WHEELED FRAME FOR COMPACT MOBILE INTERACTIVE FLOOR PROJECTION 23417, February 2020
Copyright ROMPA® Ltd