ROTARY HAMMER
6
ADDITIONAL SAFETY RULES FOR ROTARY HAMMER
1. Wear ear protectors. Exposure to noise can cause hearing loss.
2) Use auxiliary handle(s), if supplied with the tool. Loss of control can
cause personal injury.
3) Hold power tools by insulated gripping surfaces, when performing an
operation where the cutting tool may contact hidden wiring or its own
cord. Cutting accessory contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an electric shock.
4) Wear a dust mask. Do not inhale the harmful dusts generated in drilling
or chiseling operation. The dust can endanger the health of yourself and
bystanders.
5) Be sure the bit is secured in place before operation.
6) Under normal operation, the machine is designed to produce vibration,
the screws and bolts can come loose, causing a breakdown and accidents.
Check tightness of them carefully before running.
7) In cold weather or a long time tool not be used, please keep the tool
running without load a few minutes to warm up the grease inside, otherwise
hammering function is difcult to get.
8) Be sure you stand stably and no one is below when you using tool is
in high location.
9) Hold the tool rmly with two hands.
10) Don’t touch any moving parts.
11) Don’t leave the tool running itself, operate tool only when hand-held.
12) Don’t point the tool to anybody for the bit could y out in case.
13) Don’t touch the BIT OR PARTS CLOSE TO THE BIT immediately
after operation, they may extremely hot and could burn your skin.
14) Any damage and abnormal happen, please stop to use immediately
and disconnect it, ask RONIX SERVICE authorized centers to check
and repair.
15) Right use accessories and parts: Don’t use other parts and acces-
sories which not mentioned in the manual otherwise may cause injuries!
16) Special attention to voltage: Before connecting the power tool,
