Ropox 40-44010 User manual

Ropox Support Washbasin
Fixed –Basic - Manual
MOUNTING INSTRUCTIONS
Keep this manual with the product at all times
PDF 6095 / 01.07.2019

Page 2
© ROPOX 2014
Before starting installation, check that all parts mentioned in the list of components have been
delivered.
See list of components from page 23.
Ropox Support Washbasin is available in three models:
Fixed page 3
Basic height adjustment page 4-11
Manual height adjustment page 12-22
Mounting must always be carried out by competent personnel
NOTE:
When mounting screws in the wall, always consider the strength and nature of the
wall. The screws provided are only intended as a guide for installation on a reinforced
wall with a view to the specified maximum loads on screws.

Page 3
© ROPOX 2014
Support Washbasin, Fixed (40-44010/11)
Recommended:
6 x 8x72
6 x rawlplugs
NOTE: Depending on wall type, choose other
suitable screws, as required.
Max load on upper screws: 150 kg/screw
Mounting of covers: See page 9-11
320
256
150

Page 4
© ROPOX 2014
Support Washbasin with Basic frame (40-4012/13)
12 x 4x16
2 x M5
2 x M5x10

Page 5
© ROPOX 2014
Recommended:
6 x 8x72
6 x rawlplugs
510,5
NOTE: Depending on wall type, choose other
suitable screws, as required.
Max. load on upper screws: 85 kg/screw
Fine adjustment of wall fitting –use legs on washbasin as a guide

Page 6
© ROPOX 2014

Page 7
© ROPOX 2014
!

Page 8
© ROPOX 2014
480
170
320

Page 9
© ROPOX 2014
Mounting of covers for 40-44012/13
2 x 4.5x50
2 x rawlplugs

Page 10
© ROPOX 2014
2 x M4x10
6 x 4x16