Ropox Slimline Electric 40-15601 User manual

Ropox SlimLine Electric
USER MANUAL
This manual must always accompany the product
PDF
6183 01
-
01
-
18
© ROPOX 2017

© ROPOX 20171
Table of contents
Product information .......................................................................................................................................... 2
General product information ........................................................................................................................ 2
Technical data................................................................................................................................................ 2
Use................................................................................................................................................................. 3
Dimension drawings ...................................................................................................................................... 4
Installation interfaces.................................................................................................................................... 8
Positioning of water, drain, and power installations .................................................................................... 9
Connection adapters ................................................................................................................................... 10
Cleaning ....................................................................................................................................................... 11
Mounting information..................................................................................................................................... 12
List of components ...................................................................................................................................... 12
Mounting instructions ................................................................................................................................. 15
Cable diagrams ............................................................................................................................................ 25
User information ............................................................................................................................................. 26
Functionality testing .................................................................................................................................... 27
Label ............................................................................................................................................................ 27
Symbols........................................................................................................................................................ 27
Safety in use ................................................................................................................................................ 28
Service information ......................................................................................................................................... 29
Troubleshooting .......................................................................................................................................... 29
Maintenance................................................................................................................................................ 30
Performance test......................................................................................................................................... 30
Service schedule .......................................................................................................................................... 31
Spare parts................................................................................................................................................... 32
CE marking....................................................................................................................................................... 33
EU – Declaration of confirmity .................................................................................................................... 33
Complaints....................................................................................................................................................... 34

© ROPOX 20172
Product information
General product information
Ropox Slimline height adjustable unit offers the user the greatest experience in the least possible
packaging. With a depth of only 58mm the height adjustment does not take up unnecessary space in the
bathroom and leaves an elegant impression.
With a range of 300 mm, the electrical height adjustment covers the users’ needs, whether sitting or
standing. The positioning of the height adjustment on the wall provides more space for foot supports for
wheelchair users.
The manual must always be stored in a place where it is easily accessible to the user. The manual must
follow the product at all times.
Technical data
Product name: Ropox Slimline Electric
Item no.:40-15601 Unit with Ropox straight support washbasin
40-15603 Unit with Ropox standard washbasin
40-15605 Unit with Ropox hospital washbasin
40-15607 Unit without washbasin
Height adjustment: 30 cm (70-100cm)
Power supply: 230V, 50Hz, max. 2.9A
Duty circle: Max. 10 % = 2 min. active/18 min. break
IP protection: All electrical components are IPX6 approved
Materials:Frame: Welded steel tube St. 37
Washbasin: Synthetic/marble composite (40-15605: porcelain)
Cover: Vacuum-formed acrylic glass
Surface treatment:Chromite, gel coat
Max. load: Tested in accordance with DS/EN 12182:2012 and DS/ISO 17966:2016
with the following max. user weights:
40-15601: 200kg
40-15603: 200kg
40-15605: 120kg
40-15607: 120kg (when using a porcelain wash basin)
Temperature:10-40° C
Manufacturer:Ropox A/S
DK-4700 Næstved,
Tel.: [phone]
Email: [e-mail]
This product has CE marking and is thus declared to be in accordance with
the basic requirements concerning functionality and safety according to
the current Machinery Directive. All variants of Ropox Slimline Electric are
manufactured in accordance with the relevant requirements of Directive
93/42/EEC concerning medical devices and belong to the lowest risk class

© ROPOX 20173
1.
Use
Ropox Slimline Electric is height adjustable in order to provide an optimal work posture for users and
helpers. Ropox Slimline Electric may NOT be used as a lifting table or as a person lifter.
Height adjustment with a fixed standard control
Hand control with spiral cable (available for purchase)

© ROPOX 20174
Dimension drawings
40-15601
700-1000mm travel range

© ROPOX 20175
40-15603
700-1000mm travel range

© ROPOX 20176
40-15605
708-1008mm travel range

© ROPOX 20177
40-15607
300mm travel range

© ROPOX 20178
Installation interfaces
Wall characteristics
The wall in the bathroom must be of proper screw material approved for wet rooms.
The product is load tested in accordance with DS/EN 12182 and ISO 17966, and the maximum user
load is:
40-15601: 200kg
40-15603: 200kg
40-15605: 120kg
40-15607: 120kg (when using a porcelain wash basin)
Maximum pull out force in the top screws: 68 kg/screw.
POWER
The power connection is located above the lifting unit to prevent water and splashing. The lifting
unit is supplied with a cable of 200 cm. The recommended location of the power connection is
illustrated on the drawing.
PLUMBING
The drain is Ø32 and ends in an Ø32x88.5° drain bend. The maximum protrusion of the drain
connection and the elbow from the wall is 77 mm to allow for covers for water and drain.
The water supply ends in 2 (two) 90° angled Ballofix valves with ½” outside thread. The water
supply should be located according to the instructions. It is recommended that the water
connection is angled at 45°, cf. drawing, to ensure a better movement of the water hoses. The
maximum protrusion of the shut-off valves is 75 mm from the wall to allow for covers for water
and drain.
It is recommended that the water connections and drain are located as illustrated on the drawing.
It is important that all hoses for the water connection and drain are flexible so that the frame can
move freely and unhindered within its height adjustment range of 70-100 cm (incl. washbasin).
The drain may also be positioned in the floor – in that case, however, it is not possible to use the
inside cover cap (40-15610).

© ROPOX 20179
Positioning of water, drain, and power installations
The power connection is
positioned in a radius of up to
1500mm

© ROPOX 201710
Connection adapters
If the recommendations cannot be met, the components described below may be ordered. Ropox
is not responsible for the optimal functionality of the below components under covers when
adjusting the height of the unit.
Water connection adapters
Hoses from washbasin Adapter Installation in room
(not included)
No adapter needed
1/2"
Thread
1/2" -> 3/8"
Item no. 97001670
3/8"
Thread
1/2" -> 15mm
Item no. 97001666
15mm
Pipe
Water hose extensions
Hose from washbasin Coupling piece Extra hose
1/2" -> 1/2"
Item no. 97001662
1/2" x 1/2", 0.5m, steel
Item no. 97001123
1/2" x 1/2", 1m, plastic
Item no. 97001120
Drain adapters
Drain from washbasin Adapter Installation in room
(not included)
No adapter needed
Ø32
Ø32 -> Ø40
Item no. 97001660
Ø40
Ø32 -> Ø50
Item no. 97001661
Ø50
Drain extensions
Drain hose from washbasin Coupler Extra drain hose
Ø32-Ø32
Item no. 97001662
Ø32 Flex hose, 40-110cm
Item no. 97001161
Ø32 Flex hose, 27-62cm
Item no. 97001162
1/2”
Ø32
Ø32

© ROPOX 201711
Cleaning
During use, the product may get dirty. It is very important that the washbasin and the lifting unit
are cleaned in accordance with these instructions.
Ropox SlimLine may be wiped with a wrung cloth with lukewarm water and a mild detergent. Do
not use corrosive/grinding fluids or scouring sponges.
Cleaning of washbasin
The washbasin is made of a composite material of marble and synthetic granulates with a gel coat
surface. This provides a hard and hardwearing finish, which is very easy to clean. Wash the
surfaces daily with water and wipe with a dry cloth. Do not use cleaning agents containing hard
abrasives – such as steel wool, scouring powder, or sulphuric acid.
If the water has high calcium content, calcareous deposits will often occur in the washbasin. These
deposits should be removed at least once a week by using a detergent containing citric acid, acetic
acid, or phosphoric acid. Leave the detergent to work for 5-10 minutes depending on the thickness
of the deposits and clean thoroughly with a soft scouring sponge.
Disinfection of the washbasin may be done with household disinfectants.

© ROPOX 201712
Mounting information
List of components
Slimline lifting unit with washbasin 40-15601
40*15601-040: Lifting unit 1 (one)
97002454: Mirror 600x800x5 1 (one)
40*15601-084 Cover top 1 (one)
40*15601-062 Cover bottom 1 (one)
40-15610 Installation cover* 1 (one)
(Available for 40-15607)

© ROPOX 201713
97002671 Actuator 1 (one)
97002674 Fixed control 1 (one)
97002672 Control box 1 (one)
97002679 Power supply 1 (one)
97002680 AC cable 2 m 1 (one)
97001706 Oras Saga 3910F 1 (one)
(Available for 40-15607)
40-15612-0 Plumbing kit SlimLine 1 (one)
(Available for 40-15607)
40*15601-100 Mounting parts Slimline frame 1 (ONE)
95027578 Frame screw 7.5x72 stainless 8 (EIGHT)
95027576 Zebra "shark" dowel 10x61 8 (EIGHT)
95125035 Chipboard screw 5x35 3 (THREE)
40-44170-1 Mirror bracket 1 (ONE)
96000170 Strips, black 4.8/290mm 4 (FOUR)
40*15601-021 Mounting bracket 1 (ONE)
95041285 Bolt M12x85 2 (TWO)
95170512 Chamfered washer M12 2 (TWO)
97001467 Mounting parts for Ifö Spira 60 1 (ONE)
40*15601-095 Spacer 8 (EIGHT)
95020521 COUNTERSUNK INSEX screw M5x20 4 (FOUR)
97001601 Prevex siphon 1 (ONE)
97001162 Flexible drain hose ø32/32 connecting pipe 1 (ONE)
97001035 32x88.5° white PP Wafix elbow HT 1 (ONE)
97001126 Connection hose 700mm, Lindner 2 (TWO)
97001605 Prevex 100mm extention 1 (ONE)
95091070 Plate screw ø4.8x70 cross recess A2. 1 (ONE)

© ROPOX 201714
40-15620 60cm Straight Support Washbasin 1 (ONE)
(for 40-15601)
40-15621 Ropox Washbasin Standard 60, 1 (ONE)
(for 40-15603)
40-15622 Hospital Washbasin 1 (ONE)
(for 40-15605)

© ROPOX 201715
Mounting instructions
Prior to the installation, make sure that all parts have been provided in accordance with the list of
components.
The maximum tensile load of the screws is 68 kg. The wall must be able to resist such tensile load.
Fix the mounting bracket as illustrated on the drawing with the right distance to water and drain.
Make sure that the mounting bracket is level.
Hang the lifting unit on the mounting bracket. Make sure to put the M12 bolts for the washbasin in the frame prior
to mounting.

© ROPOX 201716
Place the unit in accordance with the water connection and drain as shown on the drawing.
Push 8 (eight) spacers in behind the frame so that it has the right distance to the wall.
Mark the 8 holes for fastening. Take the lifting unit down again and drill the holes in the wall.
Centerhole for
mountingbraket

© ROPOX 201717
Use suitable rawlplugs and screws for the mounting.
Remove the protective foil on the tape and fasten the power supply above the unit. Locate 1.5 m above the floor
measured on the underside. Place it in the middle of the lifting unit.
1.5m above
floor

© ROPOX 201718
Mount the control box on the mounting bracket. Make sure that the small aluminium leg interlocks and locks the
box in a fixed position.
Connect the electrical system as illustrated. Fix the excess cable from the power supply on the mounting bracket
with strips.
Check that the unit freely moves at up/down. If needed, use cable clips etc. for the power cable.

© ROPOX 201719
Fix the rods for the mirror bracket in the frame with M5 countersunk screws.
Install the siphon. Adjust the holder bracket to the right height for the washbasin you have chosen, cf. below.
40-15620: 20mm
40-15621: 40mm
40-15622: 40mm