Ropox Standard 40-14770 User manual

© ROPOX 2022
Ropox StandardLine Washbasin
40-14770, 40-14771, 40-14772, 40-14773
User manual and Mounting instructions
This manual should always be in close proximity to the product.
TF 200.02.0026_eng
17-05-2022

2
TF 200.02.0026_eng
Table of Contents
1. SYMBOLS USED IN THIS MANUAL ..................................................................................................... 3
2. GENERAL SAFETY................................................................................................................................ 3
2.1 PRODUCT UNIT LABEL................................................................................................................................. 5
3. GENERAL REQUIREMENTS................................................................................................................. 6
3.1 PRODUCT INFORMATION.............................................................................................................................. 6
3.2 INTENDED USE............................................................................................................................................ 6
3.3 INTENDED OPERATOR ................................................................................................................................. 6
3.4 ESSENTIAL PERFORMANCE.......................................................................................................................... 7
3.5 NON-CLINICAL FUNCTIONS........................................................................................................................... 7
3.6 CLINICAL FUNCTIONS .................................................................................................................................. 7
3.7 PRODUCT DIMENSIONS................................................................................................................................ 7
3.8 OPERATION................................................................................................................................................ 9
4. MOUNTING INSTRUCTION ................................................................................................................. 10
4.1 INSTALLATION INTERFACES................................................................................................................... 10
4.2 CONNECTION ADAPTERS...................................................................................................................... 12
4.3 LIST OF COMPONENTS.......................................................................................................................... 13
4.4 INSTALLATION OF PRODUCT.................................................................................................................. 16
4.5 CABLE DIAGRAM .................................................................................................................................. 24
5. FUNCTIONALITY TESTING................................................................................................................. 25
6. SAFETY IN USE ................................................................................................................................... 25
7. CLEANING............................................................................................................................................ 26
8. TROUBLESHOOTING.......................................................................................................................... 26
9. MAINTENANCE.................................................................................................................................... 27
9.1 SERVICE SCHEDULE............................................................................................................................. 28
10. SPARE PARTS..................................................................................................................................... 29
11. ENVIRONMENTAL PROTECTION ...................................................................................................... 29
12. ELECTROMAGNETIC COMPATIBILITY............................................................................................. 30
12.1 SUITABLE ENVIRONMENTS................................................................................................................ 30
12.2 ADJACENT AND STACKED USE........................................................................................................... 30
12.3 CABLES........................................................................................................................................... 30
12.4 RF PORTABLE EQUIPMENT................................................................................................................ 30
13. COMPLAINTS....................................................................................................................................... 30
It is important to read this manual prior to mounting and use

3
TF 200.02.0026_eng
1. Symbols used in this manual
Warning Symbol
Indication of potentially hazardous situation. If not avoided, it can result in serious injury or
death.
Caution Symbol
Indication of potentially hazardous situation which may result in minor or moderate injury.
It may also be used to alert against unsafe practices.
Notification Symbol
This symbol is used to notify correct use and handling of the product.
2. General safety
This manual must be read and understood before use.
Always keep this manual in close proximity of the product.
The use, installation and service of this product must be in
compliance with this manual to avoid accidents and serious
personal injury.
Never use or handle this product in other ways specified in
this manual as it can result in personal safety hazards and/or
cause damage to the product.
Persons installing and/or using this product either as operator
or user should have the necessary safety information and
access to this manual.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
designated persons in order to avoid a hazard.

4
TF 200.02.0026_eng
Do not perform repairs, disassembly or assembly operations,
add-ons, re-adjustments or modification of the product
beyond what is described in this manual. These must be
carried out by Ropox or Ropox authorized personnel. Do not
perform service while in use.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
Do not use the product if it has defects or have become
damaged before being repaired or replaced.
If the control box makes unusual noise or smells, switch off
the mains voltage immediately.
Take care that the cables are not damaged.
Unplug the mains cable on mobile equipment before it is
moved.
The products must only be used in an environment that
corresponds to their IP protection.
The information in this manual is based on correct installation
in accordance with installation instructions for this product.
Ropox cannot be held liable if the product is used in any way
that differs from stated in this manual and/or installation
instruction.
Ropox reserve the right to amend this manual and reference
documents without prior notice.

5
TF 200.02.0026_eng
2.1 Product Unit label
This product is UKCA-marked in accordance with:
UK SI 2002 No. 618 - The Medical Devices Regulations 2002, and its amendments
UK SI 2008 No. 1597 - The Supply of Machinery (Safety) Regulations 2008, and its
amendments
This product is CE-marked in accordance with:
European Medical Device Regulation (EU)2017/745
Council Directive 2006/42/EC on machinery
Council Directive 2011/65/EU, RoHS
Manufacturer name and address
Date of production
Stock number
Serial number
Operating interval of electrically operated equipment. The use of electrical height
adjustable equipment can run at maximum 2 minutes, followed by an 18-minute
break.
Type BF applied part. The product complies with IEC 60601-1 requirements to
provide protection against electric shock.
Consult manual for important safety related information, warnings and safety
precautions.
Class II, double isolated electrical components.
Do not dispose as unsorted municipal waste. Product must be returned to a
designated recycling station.
Operating and storing temperatures may not exceed 5-40C°
Consult manual before use

6
TF 200.02.0026_eng
3. General requirements
3.1 Product information
Manufacturer
Ropox A/S
Ringstedgade 221, DK-4700 Naestved
[phone]
Email: [email protected]
Product models
Part number
Model
Configuration
40-14770
40-14771
40-14772
40-14773
StandardLine
StandardLine
StandardLine
StandardLine
Unit without washbasin
Standard washbasin
Support washbasin
Hospital washbasin
Expected service life
5 years
MDR Class
2017/745
Class I
Applied part
classification
60601-1
Type BF applied part
MEE Class
60601-1
Class II
Height adjustment
40-14770
40-14771
40-14772
40-14773
30cm range
70 –100cm
68.5 –98.5cm
70 –100cm
Maximum user weight
according to DS/EN
17966:2016
200kg / 440lb
Power supply
230V ~50Hz
I in
Max 2.5A
Intermittence
2min use / 18min pause
IP rating
IPX6
Ambient temperature
range
-10 °C to +50 °C Transport and storage
+5 °C to +40 °C Operation
Relative humidity
20% to 80% - non-condensing
Intended environments
This product is to be used only in:
Professional Healthcare Environment
Homecare Environment
The device is not intended for use in special environments as defined by IEC
60601-1-2
Materials in contact
with patient
Washbasin
Frame
Mixer tap
Synthetic/marble composite
Welded steel tube St. 37, aluminum
Chrome
Accessories
40-14777
40-14776
Hand control
Plumbing kit
3.2 Intended use
The StandardLine washbasin is especially suitable for private homes and institutions. The height is adjusted
electrically. There are three types of washbasins to choose from so you can be sure to get the model that fit
the users best. These include a standard wash basin, one that provides support through integrated handles,
or one that’s larger in size, intended for hospital use.
3.3 Intended operator
Reading and understanding this manual will be sufficient training for an intended operator. Children under
the age of 16 or patient are not considered intended operator.

7
TF 200.02.0026_eng
3.4 Essential performance
The product does not have essential performance, as the patient and user do not experience any risk in case
of loss of product function/performance.
3.5 Non-clinical functions
Height adjusting offers better ergonomics to the user.
3.6 Clinical functions
The product does not have any clinical functions.
3.7 Product dimensions
40-14770
(30cm range)
40-14771
(Height adjustment 700-1000mm)

8
TF 200.02.0026_eng
40-14772
(Height adjustment 685-985mm)
40-14773
(Height adjustment 700-1000mm)
NB! All dimensions are in mm

9
TF 200.02.0026_eng
3.8 Operation
Standard control
The washbasin height is adjusted by means of the fixed Ropox control button
mounted in the top of the lifting unit.
The washbasin is raised/lowered by pressing the up/down symbol on the
control.
The washbasin stops moving as soon as the button is released.
Ropox hand control with cable (accessories)
As an alternative, you can use a hand control with cable. The washbasin is
operated in the same way. As soon as the button is released, the washbasin
will stop moving.
Warning!
The product should always be able to travel the full range of actuation without colliding
with objects. Failing to do so will compromise the product stability and introduce risk of
squeezing body parts.
Special care should be taken in ensuring that no children or adults are sited under the
product as severe injury from entrapment may occur.

10
TF 200.02.0026_eng
4. Mounting instruction
4.1 Installation interfaces
Construction
The wall must be made of a material suited for screw
mounting and approved for damp rooms. The hatched
area is the minimum area for reinforcement of the wall.
Tested in accordance DS/ISO 17966:2016 with the
following max. user weights:
40-14772: 200kg (440 lbs)
40-14773: 200kg (440 lbs)
40-14770: 200kg (440 lbs) (with porcelain wash basin)
Max. tensile load of upper screws
50kg/screw (110 lbs)
The washbasin is supplied with a set of screws and
rawlplugs suitable for mounting on a concrete wall. The
fitter should always consider the material, condition and
strength of the wall and use screws and rawlplugs
suitable for the specific wall type.
Plumbing
The drain is Ø32 (1 ¼”) and ends in an
Ø32x88.5° drain elbow.
The water supply ends in 2 (two) 90°
shut-off valves with ½” outside thread
pointing upwards (not included). The
maximum protrusion of the shut-off
valves and drain connection should be
max 90mm (3 ½”) to allow for the
covers.
The optimum location and orientation is
as shown in green.
It is important that all hoses for water
connection and drain are flexible to
allow the frame to move freely within
the height-adjustment range of 700-
1000mm (27 1/2” – 39 2/5”) (including
washbasin).
For purchase of adapters for connection
to various standard installations, see
”Connection Adapters –Other
Washbasins”.
Power
Recommended location of socket in wall for optimum and hidden wiring is shown in red. If a different location
is required, the cable from the control unit is 3200mm (126”).