
Tasting Niche Dia. With Indiv. 4
Step 3
Attaching FRONT cross pieces and spacers.
Nail the cross pieces on the 2nd and 3rd support cleat starting
from the bottom and under the 2nd and 6th cleat starting from the
bottom. Nail the cross pieces on the bottom of the middle ladders.
Nail the spacers on the 1st support cleat as shown.
Step 4
Attaching BACK cross piece for middle ladders, stemware holder
(OPTIONAL) and counter top.
Nail the cross pieces on the bottom of middle ladders. Fasten optional
stemware holder under middle ladders to the cross pieces from the
top using #8x1 “ screws. Fasten counter top to the spacers from the
bottom using #8x1 ” screws. It is highly recommended to drill “
dia pilot holes in cross pieces and spacers before attaching glass
holder and counter top.
1
41
4
3
32
Face this top cross piece upwards
Install cross pieces on
support cleat as shown.
Install spacers on 1st and 3rd
support cleat as shown.
Apr/23/2012 Toll Free: 1-888-253-6807
www.RosehillWineCellars.com
6ft Premier Cru
Kit Rack