Rosewill RC103 User manual

USB 2.0 5-Port PCI Adapter RC103
User Manual

USB 2.0 5-Port PCI Adapter RC301 User Manual
2
Features and Benefits
zVIA VT6212 chipset
zPCI 32-bit 33MHz Interface
zCompliant with USB specification revision 2.0
zBackward compatible with USB 1.1 Specification
zHot-swapping feature allows you to connect/disconnect devices without first turning system off
zSupports high-speed (480Mbps), full-speed (12Mbps), and low-speed(1.5Mbps) data transfer modes for
simultaneous operation of multiple USB 2.0/1.1 devices
zConnects up to 127 USB Device Simultaneously on each port
zWorks with a various type of USB devices including hubs, removable drives, digital cameras, scanner,
CD-RWs, DVD-ROMs, PC video cameras, printers, and more…
zFour (4) external USB 2.0 ports
zOne (1) internal USB 2.0 port (Sharing with first external USB port UJ1)
Package Contents
z1 x PCI VIA USB 2.0 Card
z1 x User Manual
System Requirements
zWindows® 2000 SP4 / XP SP1 or later / Server 2003 / Vista
zAvailable PCI slot
Hardware Description
Before installing the PCI VIA USB 2.0 Card, please see the photo below highlighting the available USB ports of the card.
Note: The Internal Port (UJ5) shares with first External Port (UJ1).

USB 2.0 5-Port PCI Adapter RC301 User Manual
3
Hardware Installation
zTurn Off the power to your computer.
zUnplug the power cord and remove your computer’s cover.
zRemove the slot bracket from an available PCI slot.
zTo install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard.
Push the board down firmly.
zReplace the slot bracket’s holding screw to secure the card.
zReplace the computer cover and reconnect the power cord.
Driver Installation
For Windows® XP/2000
Windows® XP/2000 will automatically detect and install the correct driver for the PCI VIA USB 2.0 Card.
However, please ensure you have the latest Service Pack Installed.
For Windows® XP
Windows® XP Service Pack 1 or later
For Windows® 2000
Windows® 2000 Service Pack 4 or later
For Windows® Server 2003/Vista
Windows® Server 2003/Vista has built-in driver support for this controller. Just install the board and Windows will
automatically detect and install the correct drivers for it. No additional driver is necessary.
To Verify Driver Installation
Right click My Computer, then click Manage. Click Device Manager.
Double click Universal Serial Bus controllers option.
- USB Root Hub (USB 2.0 Root Hub in Windows® 2000)
- USB Root Hub
- USB Root Hub
- VIA Rev 5 or later USB Universal Host Controller (VIA USB Universal Host Controller in Windows® 2000)
- VIA Rev 5 or later USB Universal Host Controller (VIA USB Universal Host Controller in Windows® 2000)
- VIA USB Enhanced Host Controller
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty information and future support for your product.