Rosewill RNX-N2LX User manual

Wireless N Adapter RNX-N2LX
Quick Installation Guide

Wireless N Adapter RNX-N2LX Quick Installation Guide
1
About This Guide
This Quick Installation Guide only provides you some basic configuration instructions.
For more detailed information, please refer to the Wireless Network Adapter User Manual.
Before you begin, you must check the following minimum system requirements
zA notebook /desktop pc with an available USB port
zAt least a 300MHz processor and 32MB of memory
zAn 802.11n、802.11g or 802.11b Access Point (for infrastructure Mode) or another
802.11n、802.11g or 802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking
mode.)

Wireless N Adapter RNX-N2LX Quick Installation Guide
2
Install Driver and Utility
Software Installation
zInsert the Driver and Utility CD-ROM into the CD-ROM driver.
zThe Wizard should run automatically, and Figure 1-1 should appear. If not,
click the Start button and choose Run. In the field that appears, enter
D:\autorun.exe (if ‘’D’’ is the letter of your CD-ROM drive).
Figure 1-1
Next we use the USB wireless adapter installation steps as example. According to the
wireless adapter installation steps, you can complete wireless adapter installing easily.
zClick “Windows Driver”on the Wireless Client Configuration Utility
dialogue box, and then select the installing language from the next screen
and click Next button.

Wireless N Adapter RNX-N2LX Quick Installation Guide
3
Figure 1-2
zClick Next
Figure 1-3
zClick Install to start installing

Wireless N Adapter RNX-N2LX Quick Installation Guide
4
Figure 1-4
zFollow the InstallShield Wizard steps, and click Finish when done.
Figure 1-5
zNow your PC or notebook will restart automatically.

Wireless N Adapter RNX-N2LX Quick Installation Guide
5
Install Wireless Adapter
The wireless USB Adapter supports up to 300 Mbps wireless connection. This
USB adapter is fully compliant with the specifications defined in IEEE802.11n
standard. It is designed to complement USB2.0 computers and supports
Windows98SE/Me/2000/XP/Vista/Win7.
USB adapter Installation
The status LED indicators of the USB wireless adapter are described in the following.
zLnk/Act ON (Blue): Indicates a valid connection
zLnk/Act Flashing: Indicates the adapter is transmitting or receiving data.
Figure 1-6
Install USB adapter
zPower on your PC, let the operating system boot up completely, and log in as
needed.
zHold the adapter and insert it into a USB slot.
zIf the Welcome to Found New Hardware Wizard displays, choose install the
software automatically (Recommended), and click Next button. The driver will
be installed automatically.

Wireless N Adapter RNX-N2LX Quick Installation Guide
6
Figure 1-7
zNow you have completed the driver and hardware installation for the adapter.
Configure your wireless adapter
zDouble-click the icon on your desktop to run
Figure 1-8
zSelect Available Network tab and click Refresh button to refresh current
available wireless network

Wireless N Adapter RNX-N2LX Quick Installation Guide
7
Figure 1-9
zDouble-click a wireless network which you want to connect

Wireless N Adapter RNX-N2LX Quick Installation Guide
8
Figure 1-10
zChoose the Network Authentication Mode and Data encryption from the
drop-down menu and import the network key in popup window. Then click
OK button.

Wireless N Adapter RNX-N2LX Quick Installation Guide
9
Figure 1-11
Congratulations! You’ve successfully configured your wireless adapter and
connected to a wireless network!