Ross Xpression 4ru ip User manual

Ross Video Ltd.

Part #: ###-###-##

Issue: #

Serial #: ########

#/#

USB 3.0

USB 3.1

When contacting

technical support, please

provide the information

listed on this label.

1Attach the handles to the front rack-mount tabs by aligning the handle with the round holes and

fastening from the rear with the supplied screws.

2Use the supplied Rack Mount Kit to mount the XPression system in a 19’’ EIA equipment rack.

For information on installing the XPression chassis in a rack, see the provided document “Installing the

Chassis in a Rack”.

3Plug the supplied Keyboard into a USB port.

4Plug the supplied Mouse into a USB port.

5Connect a Monitor (customer supplied) to any of the three display ports (a).

A monitor may also be connected to the USB-C port (b). When using display ports, ensure the correct

display port to DVI adapters are used (DVI-D or DVI-I).

KVM extenders (customer supplied) are required when the XPression system monitor, keyboard, and

mouse are located remotely from the rack room.

6Insert a small form-factor pluggable (SFP) (customer supplied) into SFP cage 1 and attach the

necessary networking cable.

7If using redundancy, insert a small form-factor pluggable (SFP) (customer supplied) into SFP cage 2

and attach the necessary networking cable.

8Plug an Ethernet cable from your Local Area Network into one of the Ethernet ports.

XPression systems can run standalone or accept a connection to a production network. The network

connection is also used for the RossTalk / Smart GPI Feature.

Continued on other side...

CAUTION: Before you set up and operate this product, see the “Important Safety Instructions” in your Manual.

Getting Started

PATENTS ISSUED and PENDING. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,mechanical, photocopying, recording or

otherwise, without the prior written permission of Ross Video. While every precaution has been taken in the preparation of this document, Ross Video assumes no responsibility for errors or omissions. Neither is any liability

assumed for damages resulting from the use of the information contained herein.