Rosslare AYC-E/Q60 Series User manual

2012
March
AYC-E/Q60 Family
Vandal Resistant Convertible
Reader/Controllers
Instruction Manual

Copyright © 2012 by Rosslare. All rights reserved.
This manual and the information contained herein are proprietary to REL, RSP
Inc. and/or their related companies and/or subsidiaries’ (hereafter:”ROSSLARE”).
Only ROSSLARE and its customers have the right to use the information.
No part of this manual may be re-produced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, without the express written
permission of ROSSLARE.
ROSSLARE owns patents and patent applications, trademarks, copyrights, or
other intellectual property rights covering the subject matter in this manual.
TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN
THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS
AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND
TRANSMITTAL TO THIRD PARTIES WITHOUT EXPRESS WRITTEN PERMISSION
MAY RESULT IN LEGAL PROCEEDINGS.
The furnishing of this manual to any party does not give that party or any third
party any license to these patents, trademarks, copyrights or other intellectual
property rights, except as expressly provided in any written agreement of
ROSSLARE.
ROSSLARE reserves the right to revise and change this document at any time,
without being obliged to announce such revisions or changes beforehand or
after the fact.

Table of Contents
AYC-E/Q60 Family Instruction Manual iii
Table of Contents
1. Introduction .............................................................. 9
1.1 Reader/Controller Types......................................................... 9
1.2 Box Content ....................................................................... 10
1.3 Ancillary Equipment ............................................................ 10
2. Technical Specifications.......................................... 11
2.1 Key Features ....................................................................... 12
2.1.1 Reader ....................................................................................... 13
2.1.2 Controller .................................................................................. 13
3. Installation .............................................................. 14
3.1 Mounting the AYC-E60....................................................... 14
3.2 Mounting the AYC-Q60 ...................................................... 15
4. Wiring Instructions ................................................. 17
5. Reader Functionality............................................... 21
5.1 Transmit Mode ................................................................... 21
5.2 Programming the AYC-E/Q60 Series..................................... 21
5.2.1 Entering Programming Mode..................................................... 23
5.2.2 Exiting Programming Mode ....................................................... 23
5.2.3 Selecting Keypad Transmission Format ...................................... 24
5.2.4 Keypad Transmission Format Option Number ............................ 25
5.2.5 Selecting HID Prox Card Transmission Format ............................ 30
5.2.6 Selecting Rosslare PROX Card Transmission Format ................... 30
5.2.7 Changing the Programming Code ............................................. 33
5.2.8 Changing the Facility Code........................................................ 33
5.2.9 Setting the Backlight Behavior ................................................... 34

Table of Contents
iv AYC-E/Q60 Family Instruction Manual
5.2.10 Setting the Reader Format ......................................................... 35
5.2.11 Return to Factory Default Settings ............................................. 35
5.2.12 Replacing a Lost Programming Code ......................................... 36
6. Controller Functionality.......................................... 37
6.1 Normal, Secure, and Master Users........................................ 37
6.2 Modes of Operation............................................................ 38
6.2.1 Normal Mode ............................................................................ 38
6.2.2 Bypass Mode ............................................................................. 38
6.2.3 Secure Mode ............................................................................. 39
6.3 Changing the Modes of Operation....................................... 39
6.3.1 Changing from Normal Mode to Secure Mode .......................... 39
6.3.2 Changing from Secure Mode to Normal Mode.......................... 39
6.3.3 Changing from Normal Mode to Bypass Mode.......................... 40
6.3.4 Changing from Bypass Mode to Normal Mode .......................... 40
6.4 Auxiliary Input & Output...................................................... 40
6.5 Door Alarms ....................................................................... 41
6.6 Internal Case and Back Tamper ............................................ 41
6.7 Lockout Feature (Keypad/Card Tamper)................................ 41
6.8 REX Function ...................................................................... 41
6.9 Secured Series Intelligent Power Supply................................ 42
6.10 Programming the AYC-E/Q60 .............................................. 42
6.10.1 Entering Programming Mode..................................................... 43
6.10.2 Exiting Programming Mode ....................................................... 44
6.10.3 Changing Lock Strike Code ....................................................... 44
6.10.4 Changing Auxiliary Code ........................................................... 45
6.10.5 Changing the Programming Code ............................................. 46
6.10.6 Changing the Normal/Secure Code ........................................... 47
6.10.7 Changing the Normal/Bypass Code and Door Chime Settings ... 47

Table of Contents
AYC-E/Q60 Family Instruction Manual v
6.10.8 Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike
Release Time.............................................................................. 48
6.10.9 Defining the Auxiliary Input and Output .................................... 50
6.10.10 Detailed Reference Guide .......................................................... 52
6.10.11 Setting the Lockout Feature....................................................... 56
6.10.12 Setting the Backlight Behavior ................................................... 57
6.10.13 Selecting the Rosslare PROX and HID Prox Format ..................... 57
6.10.14 Enrolling Primary and Secondary Codes ..................................... 58
6.10.15 Deleting Primary and Secondary Codes...................................... 62
6.10.16 Relay Codes Assignment............................................................ 64
6.10.17 PIN Code Length/Factory Default Settings.................................. 66
6.10.18 Replacing a Lost Programming Code ......................................... 67
6.10.19 Replacing a Lost Normal/Secure Code........................................ 67
A. Declaration of Conformity...................................... 68
B. Limited Warranty .................................................... 69

List of Figures
vi AYC-E/Q60 Family Instruction Manual
List of Figures
Figure 1: Drilling & Mounting Template........................................................ 14
Figure 2: Back Plate ...................................................................................... 16
Figure 2: Controller Application Wiring Diagram .......................................... 18
Figure 3: Auxiliary Output Connection with Internal Power .......................... 19
Figure 4: Auxiliary Output Connection with External Power.......................... 19
Figure 5: Reader Application Wiring Diagram ............................................... 20

List of Tables
AYC-E/Q60 Family Instruction Manual vii
List of Tables
Table 1: Wiring Colors.................................................................................. 17
Table 2: Reader Programming Menu ............................................................ 22
Table 3: Keypad Transmission Format........................................................... 25
Table 4: Controller Programming Menu ....................................................... 43
Table 5: Quick Reference Guide for Auxiliary Mode Setting.......................... 51

Notice and Disclaimer
viii AYC-E/Q60 Family Instruction Manual
Notice and Disclaimer
This manual’s sole purpose is to assist installers and/or users in the safe and
efficient installation and usage of the system and/or product, and/or software
described herein.
Before attempting to install and/or use the system, the installer
and the user must read this manual and become familiar with all
safety requirements and operating procedures.
The system must not be used for purposes other than those for which it
was designed.
The use of the software associated with the system and/or product, if
applicable, is subject to the terms of the license provided as part of the
purchase documents.
REL, RSP Inc. and/or their related companies and/or subsidiaries’
(hereafter:"ROSSLARE") exclusive warranty and liability is limited to the
warranty and liability statement provided in an appendix at the end of this
document.
This manual describes the maximum configuration of the system with the
maximum number of functions, including future options. Therefore, not all
functions described in this manual may be available in the specific system
and/or product configuration you purchased.
Incorrect operation or installation, or failure of the user to effectively
maintain the system, relieves the manufacturer (and seller) from all or any
responsibility for consequent noncompliance, damage, or injury.
The text, images and graphics contained in the manual are for the purpose
of illustration and reference only.
In no event shall manufacturer be liable for any special, direct, indirect,
incidental, consequential, exemplary or punitive damages (including,
without limitation, any and all damages from business interruption, loss of
profits or revenue, cost of capital or loss of use of any property or capital or
injury).
All graphics in this manual are for reference only, some deviation between
the image(s) and the actual product may occur.
All wiring diagrams are intended for reference only, the photograph or
graphic of the PCB(s) are intended for clearer illustration and
understanding of the product and may differ from the actual PCB(s).

Introduction
AYC-E/Q60 Family Instruction Manual 9
1. Introduction
The AYC-E/Q60 is a Rosslare goPROX & PIN Reader with Genuine HID
Technology®, as well as Rosslare's Convertible technology. The AYC-
E/Q60 series automatically determines whether to function as a reader
or as a secured standalone controller. If the unit is connected to a
standard access control unit, then it functions as a reader. If the unit is
connected to a Rosslare secured intelligent power supply such as the
PS-A25T, PS-C25T, or PS-C25TU, it functions as a 500 user secured
standalone controller.
As a reader, the units can read all HID Prox cards/tags (125 kHz FSK)
using Genuine HID Technology®and outputs HID Prox card data in
Wiegand according to the number of bits of data stored on the card.
The units also read Rosslare PROX cards (125 kHz) and can output
Rosslare PROX card data as Wiegand 26-Bit, Clock & Data, and
Wiegand + PIN.
As a controller, the units accept up to 500 users, and allow entry via a
personal identification number (PIN) and/or by presenting a proximity
card. The PIN code length for the controller has several options. The
PIN code length can be a set number of 4, 5, or 6 digits or it can be
flexible from 4 to 8 digits.
This manual contains the following chapters:
Technical Specifications
Installation
Wiring Instructions
Reader Functionality
Controller Functionality
1.1 Reader/Controller Types
Upon power-on reset, the AYC-E/Q60 searches for the presence of a
Rosslare secured intelligent power supply. If a secured intelligent
power supply is detected, then the AYC-E/Q60 is automatically
configured as a secure access control unit. This is indicated by two

Introduction
10 AYC-E/Q60 Family Instruction Manual
short beeps. If the secured controller is not detected, it is
automatically configured as a reader, indicated by one short beep.
1.2 Box Content
Before beginning, verify that all of the following is in the box. If
anything is missing, please report the discrepancy to your nearest
Rosslare office.
One AYC-E/Q60 unit
Installation kit – includes security Torx screw and security Torx
Screw tool
Installation and operating instructions
1.3 Ancillary Equipment
The following equipment is required to complete your installation:
When functioning as a reader:
Compatible Host Controller (not supplied) – UL listed access
control unit (such as model AC-215U)
When functioning as a controller:
A secured series intelligent power supply – such as the PC-25T,
PS-A25T, PS-C25T, or PS-C25TU secure controllers. This unit
connects to the following:
Electric lock strike mechanism or a magnetic lock device,
which implements fail safe (power to lock) or fail secure
(power to open) functions
Request to Exit (REX) button – normally open type. Switch is
closed when pressed
Door monitor switch
Rosslare accessories can be found on www.rosslaresecurity.com.

Technical Specifications
AYC-E/Q60 Family Instruction Manual 11
2. Technical Specifications
Specifications AYC-E/Q60
Electrical Characteristics
Power Supply Type Linear type – recommended
Operating Voltage Range 5–16 VDC (when used as a controller,
provided by the secured series intelligent
power supply)
Input current standby (12
VDC)
110 mA
Input Current Max (16 VDC) 130 mA
LED Control Input Dry contact N.O.
Tamper Output Open collector, active low, 32 mA max sink
current
Cable Distance to Host
Controller
Up to 500 ft (150 meters) using an 18AWG
cable
Max Proximity Card Read
Range*
Rosslare PROX: E – 40 mm, Q – 45 mm
HID Prox: E – 40 mm, Q – 45 mm
Proximity Card Modulation Rosslare PROX/HID Prox at 125 KHz
Proximity Card
Compatibility
Rosslare PROX/HID Prox cards
Card Transmit Format
(Reader)
Rosslare PROX cards: Wiegand 26-bit, or
Clock & Data
HID cards: According to card type
Keypad Transmit Format
(Reader)
Programmable PIN code formats
LED Indicators Two tri-colored LEDs
Communication Data1/C1, Data0/C2–open collector, 5 V
termination
* Measured using a Rosslare proximity card (AT-R14) or equivalent.
Range also depends on electrical environment and proximity to
metal.

Technical Specifications
12 AYC-E/Q60 Family Instruction Manual
Specifications AYC-E/Q60
Environmental Characteristics
Operating Temp. Range -22°F to 150°F (-30°C to 65°C)
Operating Humidity 0 to 95% (non-condensing)
Outdoor Usage Weather-resistant, meets IP-65, epoxy
potted, suitable for indoor and outdoor
use
Mechanical
Size
(Height x Width x Depth)
E: 6.10 x 3 x 0.827 in. (155 x 1.73 x 0.35 mm)
Q: 4.72 x 2.99 x 0.83 in. (120 x 76 x 21 mm)
Weight E: 0.32 lb (143 g)
Q: 1.06 lb (480 g)
2.1 Key Features
The key features for the AYC-E/Q60 series are:
Built-in Proximity Card Reader (125 KHz Rosslare PROX/HID Prox
Modulation)
Programmable blue backlit keypad
Optical back tamper sensor and open collector tamper output
Lockout feature on wrong entry (keypad/card tamper)
Internal buzzer provides audible interface feedback
Two status/programming interface LEDs (tri-colored)
Fully-potted construction for outdoor use
Comes with mounting template for easier installation
Comes with an installation kit that includes a security screw and a
security screw tool

Technical Specifications
AYC-E/Q60 Family Instruction Manual 13
2.1.1 Reader
Programmable keypad transmission format
LED control input
Programmable Facility code
Rosslare PROX card transmission formats:
Clock & Data
Wiegand 26-Bit
Card + PIN
HID Prox Card Transmission Format
Wiegand (outputs per format on the card)
2.1.2 Controller
Bi-directional secure communication
Three user levels: Normal, Secure, Master
Code Search feature that helps make maintaining user codes
easier
Three modes of operation: Normal, Bypass, Secure
REX input
Chime bell and siren features are available
Programmable Lock Strike Release, Siren, and Alarm Delay timers
Programmable auxiliary input with versatile functions
Programmable auxiliary output functions
Programmable PIN code length

Installation
14 AYC-E/Q60 Family Instruction Manual
3. Installation
3.1 Mounting the AYC-E60
To mount the AYC-E60:
1. Select the location to mount the AYC-E/Q60. This location should
be at shoulder height.
2. For wall mounting, use the included mounting template as a
guide for drilling holes for mounting screws and wiring. For US
Gang Box mounting, no drilling is necessary.
Figure 1: Drilling & Mounting Template
3. When the unit is used as a reader, route the interface cable from
the AYC-E60 to the controller. A linear type power supply is
recommended when using the unit as a reader

Installation
AYC-E/Q60 Family Instruction Manual 15
4. When the unit is used as a secured controller, route the interface
cable from the AYC-E60 to a Rosslare secured series intelligent
power supply.
5. Screw the AYC-E60 to its mounting location.
6. Return the AYC-E60 front cover to the mounted back plate.
7. Secure the front cover by using the supplied security Torx screw in
the controller’s installation kit. A Torx security screw tool is
provided for use when tightening the security Torx screw.
3.2 Mounting the AYC-Q60
Attach the reader to a surface before connecting it to its power and
the access control computer.
To mount the AYC-Q60:
1. Remove the reader's front cover using the security spline key.
The screw holes on the back plate are now visible.
2. Select an approximate location for the reader.
3. Peel off the back of the self-adhesive installation template and
attach the template to the required location.
4. Using the template as a guide, drill four holes into the surface.
The required hole size is marked on the template.

Installation
16 AYC-E/Q60 Family Instruction Manual
Figure 2: Back Plate
5. Drill an additional 7/16” (10-mm) hole for the cable.
When installing the reader on a metallic surface, cover the inside
of the hole with a grommet or electrical tape.
6. Route the reader's cable to the power and access control system.
A regulated linear power supply is recommended.
7. Screw the back plate into the surface. Ensure the screws are the
size specified on the installation template.
8. Alternatively, the reader can be mounted with any strong epoxy
glue:
a. Apply the glue.
b. Hold the reader's back plate firmly in place until the glue
dries.
9. Re-attach the reader's front cover.

Wiring Instructions
AYC-E/Q60 Family Instruction Manual 17
4. Wiring Instructions
The unit is supplied with a 22-inch pigtail, having a 6-conductor cable.
To connect the unit to the controller, perform the following:
Prepare the unit's cable by cutting the cable jacket back 1¼ inches
and strip the wire ½ inch.
Splice the unit’s pigtail wires to the corresponding controller wires
and cover each connection.
Refer to Table 1 and to the wiring diagrams provided on the following
pages.
Table 1: Wiring Colors
Reader Controller Color Functionality
5~16 VDC 5~16 VDC Red +DC Input
Shield/Ground Shield/Ground Black Ground
Data 1/Clock C 1 White Communication
Data 0/Data C 2 Green Communication
G.LED/LEDCTL AUX. IN Brown LED Control/Auxiliary Input
Tamper Tamper Purple Tamper
If the tamper output is used, connect the purple wire to the correct
input on the controller when used as a reader, or to a zone input of
an intruder alarm system when used as a controller.
Trim and cover all unused conductors.

Wiring Instructions
18 AYC-E/Q60 Family Instruction Manual
•The individual wires from the unit are color-coded according
the Wiegand standard.
•When using a separate Power Supply for the Reader, this
Power Supply and that of the Controller must have a common
ground.
•The Reader’s cable shield wire should preferably be attached to
an earth ground, or a signal ground connection at the panel, or
power supply end of the cable. This configuration is best for
shielding the Reader cable from external interference
Figure 3 shows the wiring for the Controller Application using a
secured intelligent power supply.
Figure 3: Controller Application Wiring Diagram
Rosslare
PS-X25
AYC–E/Q60

Wiring Instructions
AYC-E/Q60 Family Instruction Manual 19
Figure 4 shows the auxiliary output connection using internal power.
Figure 4: Auxiliary Output Connection with Internal Power
Figure 5 shows the auxiliary output connection using the external
power.
Figure 5: Auxiliary Output Connection with External Power
Rosslare
PS-X25
Rosslare
PS-X25
ZONE INPUT

Wiring Instructions
20 AYC-E/Q60 Family Instruction Manual
Figure 6 shows how to wire a reader to an access control panel.
Figure 6: Reader Application Wiring Diagram
AYC-E/Q60