Aiphone NE-NVP User manual

+
-
- INSTRUCTIONS -
The NE-NVP is a vandal proof sub station designed for use with the NEM system. The NE-NVP-W is
the weather resistant model. It is constructed of 11 gauge carbon steel with a white powder-coated
finish. The NE-NVP can be flush or surface mounted and includes tamper proof screws and tool for
installation.
WIRING DIAGRAM:
NE-NVP (-W)
Vandal Proof Sub Station for NEM System
SBX-NVP
Surface Mount Box for NE-NVP
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
[phone]
FAX [phone] NE-NVP Instr.
0197JD
SPECIFICATIONS:
Power Source: Supplied by master station
Speaker: 20 ohms, 3" diameter, water proof and puncture resistant, 2.5 oz. ceramic magnet
Call Button: Single pole, single throw (SPST), normally open (N/O)
Faceplate: 11 gauge carbon steel with powder-coated white baked epoxy finish
Call Annunciation: Pressing call button at sub latches call at NEM master until answered
Communication: Hands free at sub. Master is push-to-talk or VOX handset
Mounting Hardware: Tamper proof screws
Terminations: Color-coded prewired pigtails
Wiring: 2 conductors homerun; or 1 common plus 1 individual per sub, looped through each sub.
Shielded cable is recommended.
Use Aiphone #822202 or #821802 for homerun wiring, #822206 for up to 5 stations
on each run, or #822210 for up to 9 stations on each run.
Wiring Distance: 420' with 22AWG; 1,000' with 18AWG.
Dimensions (H x W x D): NE-NVP alone: 7-1/2" x 5-1/2" x 2". With SBX-NVP: 8-5/8" x 6-5/8" x 2-1/4"
1
2
3
~
20
E
+
-
Red
Blk
Blu
Red
Blk
Blu
Green
jumper
(Do not cut)
NEM Master NE-NVP NE-NVP
PS-2410A
or PS-24E
Red
Blk
Blu
Green
jumper
NE-NVP
Blu
Blu
NBY-4A
x
Cut jumper
NOTES:
1. Do not cut the green jumper on the circuit
board unless a corridor lamp is included
at the sub station.
2. NE-NVP flush mounts into a 3-gang
masonry type box (Raco #692, 697,
or equivalent.)
3. Surface mount box for NE-NVP is model
SBX-NVP, sold separately.
Green
jumper
(Do not cut)
TOLL FREE TECHNICAL SUPPORT:
[phone]
TOLL FREE FAX LINE:
[phone]
TECHNICAL SUPPORT E-MAIL:
[email protected]