1.3 Checklist: setting up the digital camera
Always use manual exposure.
With automatic exposure the
Roundshot Metric can no
longer set up the exposure
values (exposure speed, f-stop,
ISO/ASA).
Always use manual focusing.
To prevent any focus
variation, the lens is covered
with a calibration ring.
Use a fast storage card with
enough capacity.
Set the white balance to a
fixed value. When setting the
white balance to “auto”, every
image will have a different
tone, making the stitching of
the sphere problematic.
Your Roundshot Metric is delivered with the following camera parameters already correctly set.
Please make sure not to change these as otherwise the capture or processing of images may not
work properly.
Set the exposure increments
to 1/3 steps. When selecting
1/2 steps the Roundshot
Metric can no longer set up
the correct exposures for
HDR bracketing.
Choose image quality JPEG L
fine or raw format.
Turn the “Auto rotate” feature
to “off”. When automatically
rotating the images the
stitching will not perform
correctly.
Set the ISO speed setting
increments to 1/3 steps.
When selecting 1/1 steps the
Roundshot Metric can no
longer set up the correct
exposures for HDR bracketing.
Turn off any exposure
bracketing sequence. The
Roundshot Metric creates its
own bracketing sequence by
controlling the camera
exposures, f-stop and ISO.
Instruction Manual Roundshot Metric –June 2017 –© by roundshot / www.roundshot.com page 5
