rovsun YPLA-08C User manual

YPLA-08C
Portable Air Conditioner
User Manual
Thank you for selecting this high quality air conditioner. Please be sure to read this
manual carefully before using it.
MADE IN CHINA

Table of Contents
UserAgreement
Precautions ..................................................................... 1
Important Safety Tips ....................................................... 3
Special Warning .............................................................. 7
Product Description
Name of Main Components and Parts .................................. 8
Control Panel and Remote Control ...................................... 9
Product Usage
Placement and Installation ................................................ 10
Operating Procedure ....................................................... 15
Cleaning and Maintenance
Water Drainage ............................................................. 16
Maintenance ......................................................................................................................................................16
Common Troubles and Diagnosis
Intelligent Diagnosis of Troubles ...................................... 19
Trouble Shooting ........................................................... 19
Some Technical Parameters of the Unit
Fuse Protector Parameters................................................ 19
Overall Dimension of the Unit .......................................... 20

1
UserAgreement
Icons appearing in this manual have the following meaning:
This type of operation is forbidden for the health and safety of you and your family.
The following events must be performed for the health and safety of you and yourfamily.
Precautions
In order to ensure the machine's service life, environment is recommended for (7-35) ℃
The unit is designed for household use
ONLY. Please use the unit indoors, keep it in
the dry environment, and do not use it
outdoors.
Do not place any objects around the unit
which can impede the interchange of air
performed by the unit.
Do not place any heavy objects on the
unit which can damage the unit.

2
Do not operate the unit using wet hands.
Do not use the unit in a humid
environment.
Always use a soft cloth to clean the unit,
and do not use the wax, thinner or irritative
detergent.
Please clean the filter screen frequently,
and cleaning it at least once two weeks is
advisable.
Do not drink the condensation water
discharged from the unit for your health.
Always turn the unit off and unplug the
power cord when the unit is intended for
no use for a long time.
Non-professional people may not attempt
to dismantle or repair the unit.

3
Important Safety Tips
The appliance shall be installed in accordance with national wiring regulations. If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Do not use a nonserviceable power cord
or power cord plug, and do not insert the
power cord into a loose plug receptacle.
Do not damage the power cord, and do not
use a damaged power cord or a power cord
of unknown type. Before use, always ensure
the electric voltage used is satisfactory.
Do not attempt to rework or extend the
power cord. When using the unit, a grounding
receptacle is advisable.
Do not insert or pull out the power cord
plug using wet hands, because it may
raise the risk of electric shock.
When pulling out the power cord,
always grip the plug, and do not pull
the power cord.

4
Do not start or stop the unit by inserting
or pulling out the power cord plug. Always turn off the unit before pulling
out the power cord plug.
Do not share a plug receptacle with a
number of large power consumers. Always keep the unit away from heat,
and keep out of the direct sun.
Always immediately turn off and unplug
the unit for trouble shooting if the unit
emits a strong noise, odor or smog.
Do not place any heavy objects on the
power cord in case of the risk of electric
shock caused by the power cord damage.

5
Do not insert your fingers or hard objects
into the louvers at the air outlet. Do not allow water to enter the electrical
parts of the unit.
If water has entered the inside of the unit,
always turn off and unplug the unit before
contacting a qualified service technician
for troubleshooting.
Always turn off the unit and unplug the
power cord before you wipe, clean, move
the unit or replace its parts.

6
When gas leaks, always open the
window for good ventilation before
rerunning the unit.
Do not let children or any other special
populations touch the unit in case of injury
to them. If they are required to operate the
unit, their operations must be subject to
adultsupervision.
For European market:
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Children shall not play with the
appliance. Cleaning and user maintenance shall
not be made by children without supervision.
For non-European market:
This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use of
the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they
do not play with the appliance.

7
50cm
Special Warning
Always place the unit on a level ground,
and keep it vertically to ensure the
normal working of its compressor.
Always maintain at least 50cm clearance
space around the unit, and keep unobstructed
at the air inlet or outlet grilles.
Never use gasoline or other flammable
liquid near the unit.
Do not use sprays or other solvents which
can cause plastic deformation or even
damage the electrical parts of the unit.

8
11
Product Description
Name of Main Components and Parts
3
1Handle 4
2Air Inlet (Right)
3Control Panel 2
4Louvers 5
5Casters
6
6Remote Control
7Air Inlet (Left)
8Air Outlet
9Drain Port
10 Filter Handle
11 Venting Kit
12 Window Kit 12
8
10
9
7
1
12
11
3
4
5
2
6

9
Control Panel and Remote Control
HIGH
WOL
1Power Button
Press the button to turn on/off the unit.
2Mode Selection Button
Press the button repeatedly to cycle between the different modes:
Cooling , Dehumidify, Fan.
3Temperature/Time Setting Buttons (Up and Down)
When the unit is running in Air Conditioner mode, press the buttons
to increase or decrease the preset temperature. In Timer mode, press
the buttons to set the desired time for the unit to automatically turn
on/off. Pressing the Setting button (Up) and the Setting button (Down)
simultaneously will change the temperature select between °F and °C.
4Fan Speed Selection Button
Press the button to cycle through high and low fan speeds.
5Timer Function Button
In standby mode, press the button to set the desired time for the unit to
automatically turn on. In power-on mode, press the button to set the
desired time for the unit to automatically turn off.
6Temperature/Time Display Window
The window is used to display the preset temperature and time.
7Remote Control Signal Receptor
The receptor is designed to receive the signal transmitted from the
remote control.
8Celsius/Fahrenheit Conversion Button
Press the button to realize the display conversion between Fahrenheit
and Celsius.
9Sleep Button
Under cooling mode ,press the button to select sleep mode.
3 2 145
7 6
DRY
51
2
4
3
9
8

10
Product Usage
Placement and Installation
Placement
Place the unit on the horizontal floor near a window.
To keep good air circulation and achieve the optimum
performance of the unit, maintain at least 50cm
clearance space around the unit.
Installation
Venting Kit
ExhaustConnector Exhaust Hose Exhaust Adapter
Window sealing plate assembly
BEST INSTALLATION
90cm(35.4inch)
50cm(19.7inch)
Window sealing
plate
Window sealing
plate
Hand pull button

11
Step 1:
Measure window size;
Adjust the length of the window sealing plate to make it fit with the size of the
window.
When the length of the window seal plate is fixed, the length of the sealing plate
is fixed by hand pull button.
Locking
opening
Step 2:
Install the fixed window seal on the window.
Step 3:
Swirl the exhaust pipe assembly (exhaust fitting end)
into the rear panel outlet (counterclockwise).

12
Overall Effect DrawingAfterAssembling
First insert
Small gap
Then slide locking.
Step 4:
Clip the exhaust pipe assembly (exhaust port end) into the window
seal panel assembly and screw it up.

13
Wrong Installation
It is important for the exhaust hose to keep good ventilation.
The wrong installation will affect the normal working of the unit.
Avoid a sharp bend in the exhaust hose while installing.
Make sure the air flows smoothly in the hose.
Warning:
The length of the exhaust hose has been specially designed for this type of unit. Do not use an extension or
exchange of a different hose as that may lead to a malfunction.
Attention:
The length of the exhaust hose can expand up to 1500mm, and please shorten its length as best as you can
when you mount it. In the installation process, keep the exhaust hose as straight as possible.
Remote Control
Before using the remote control, please correctly install the batteries. The specific steps are as follows:
1Remove the battery cover on the back of the remote control.
2Insert two new AAA DC1.5V batteries with “+” and “-”pointing
in the proper direction.
3Snap the battery cover into place on the back of the remote
control.
Attention:
1Only AAA DC1.5V batteries can be used for the remote control of the unit. Never use rechargeable
batteries or other types of batteries.
2The two batteries should be replaced at the same time, and do not mix new and old batteries.
3Remove the batteries if the remote control is not in use for an extended time.

14
Warning:
1If
Make sure that the unit is upright position for 2 hours
before turning on for first time.
you discover the battery leaks, do not use it.
2The chemical substances in batteries may cause burnt or other health hazards. If the liquid
accidentally flows down to your skin or clothing, please immediately rinse with clear water.
If you accidentally drink it, please immediately rinse mouth with clear water, and then seek
for medical attention.
3

Air Conditioner Mode
OperatingProcedure
· Plug the power cord to a power socket and turn on the unit, the unit will be in Air Conditioner mode directly
or by pressing the mode button, and at this moment the Air Conditioner mode icon lights up.
· Press the Setting button (
(Up)
60℉to 86℉
)
or the Setting button (Down) to change the preset temperature (ranging
from 16℃ to 30℃) .
· Press the FAN button to cycle through high and low fan speeds.
Fan Mode
· Press the Mode button or select FAN mode by using the remote control until the fan mode icon lights up.
· Press the FAN button to cycle through high and low fan speeds.
· The temperature cannot be set.
Dehumidification Mode
·
When pressing mode key or choosing dehumidification mode by pressing the remote controller, the
dehumidification indicator lamp lights up.
·
In dehumidification mode, the fan is defaulted to run at low speed, and wind speed can’t be adjusted.
·
Temperature can’t be set. （Note : when use dehumidify function, should remove exit pipe components,
otherwise, it will cause worse dehumidify performance, and appear “FL” water full alarm）
After entering the dehumidification mode, if room tempearture≥17℃(62℉), the compressor is ON.
Then control as follows: when room temperature ≤15℃ (59℉), the compressor is OFF; when temperature
increases to room temperature≥17℃, the compressor is started again (in order to protect the compressor, it
will be restarted 3min. later).
·
Timer Mode
· In standby mode, press the timer button to set the desired time for the unit to automatically turn on. Press
the Setting button (Up) or the Setting button (Down) to set the desired time for the unit to automatically
turn on (1-24 hours) until the timer indicating lamp lights up.
· In power-on mode, press the timer button to set the desired time for the unit to automatically turn off. Press
the Setting button (Up) or the Setting button (Down) to set the desired time for the unit to automatically turn
off (1-24 hours) until the timer indicating lamp lights up.
Sleep Mode
· Under Cooling mode , press sleep button on the remote control (or press unit botton Timer + Down at the
same time ) to select sleep mode , the fan run at low speed, the wind speed can’t be adjusted. Change the
mode or press sleep button on the remote control again (or press unit botton Timer + Down at the same
time ) to stop this mode.
15

16
Cleaning and Maintenance
Water Drainage
This product has a self-evaporative system. The condensing water will recycle to cool the
condenser. This water-cooled mode not only can improve cooling efficiency, but also save
energy.
If the water basin within the unit is full, "FL" will flash on the display screen, accompanying with
aural warning. Meanwhile the compressor will automatically stop working. At this moment the
water in the basin should be drained out, and the specific steps are as follows:
1
Remove the power cord plug and take down the venting kit.
2
Move the unit to a good place.
3
Remove the drain plug, and exhaust the water within the unit.
4
Fasten the drain plug once again.
5
Remount the venting kit and turn on the unit.
Maintenance
Note: To avoid electric shock, please turn off and unplug the unit prior to maintenance.
Clean the unit housing
1
Unplug the unit before cleaning.
2 Use a damp soft cloth to clean the surface. Do not use a chemical
solvent like benzene, alcohol or gasoline, etc. as it may damage
the surface or even the unit.
3
Do not let water splash into the unit.

17
Air filter
It is recommended to clean the air filter once every two weeks, and if the indoor air quality is poor,
the cleaning frequency should rise appropriately. Because the air filter is blocked with a dust, the airflow
volume may reduce. Specific cleaning steps are as follows:
1
As shown in the diagram below, first remove the air-inlet grille, and then remove the air filter.
3
2
Wash
Use a vacum cleaner to vacum off all lint and dander from filter.
the air filter by immersing it into clear water or warm water (Ca. 40℃) with a neutral
detergent. Then place it in a cool place, and dry it thoroughly.
4 Slide the filter back into place after it is thoroughly dried.
5
Restart the unit, and the unit will run normally.
If the air filter is not too dirty, use a dust
catcher to remove the dust from its surface. If the air filter is very dirty, use clear water
or warm water (Ca. 40℃) to wash it.
Note:
1Do not use too hot water (preferential temperature is about 40℃) or irritative detergents (like alcohol,
gasoline or benzene) to clean the air filter.
2To avoid the deformation of air filter, the cleaned air filter must be away from heat, and it should be
kept in a dry place and dry naturally.
3Do not run the unit without the air filter.

18
SeasonalMaintenance
If the unit is not intended for use for a long time, please maintain it according to the following steps:
1 Remove the drain plug for water drainage.
2 Run the unit for 2 hours in FAN mode until the inside of the unit is blow-dried.
3 Turn off the unit and disconnect the plug from the power supply.
4 Clean the air filter and remount it.
5 Dismantle the accessories including the exhaust hose and keep them safely.
6 Take the batteries out of the remote control.
7
8
Wrap the unit with a plastic bag and keep it in a cool and dry place.
When you start using the unit after it has not been used for a long time, please note the following points:
1 Make sure whether the drain plug and air filter are installed.
2 Inspect the power cord for signs of damage before use. If the power cord is damaged, do not use it.
3 Reinstall the batteries in the remote control.
4 Reinstall all other parts in accordance with the mounting list.
If possible store unit in its original box with the packing provided.