8 - PRODUCT MANUAL
SET UP
1. Remove blender motor base, power
cord, tamper, blender jar, manual and lid from
packaging.
2. Unwind the power cord.
3. Check for any packing material that may have
blocked ventilation holes on the underside of the
blender motor base.
4. Inspect all items to ensure no damage
occurred during shipment.
5. If any damage has occurred, contact your
Royal Prestige “service center” immediately.
The Power Blender motor base consists of the:
• Control Knob which controls the Pulse, Stop, and Manual Speed Control functions.
• Button which controls the Power On mode and Stand-by mode.
• Rear on/o switch
• Removable power cord
* Power cord may be shipped in separate box.
• Power Blender motor base
• Blender Jar with Lid
assembly
• Tamper
• Power Blender manual
SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS
You should have received the following items:
The blender jar assembly consists of the
• Jar: Tritan® (copolyester), easy to clean.
• Blade Assembly: Stainless steel blades designed to provide smooth, consistent blending.
• Lid: Lid assembly seals liquids within the jar during blending.
NOTE: Do not ll the blender jar beyond its maximum marked capacity.
BLENDER MOTOR BASE
BLENDER JAR ASSEMBLY
BOX #1
BOX #2
ROYAL PRESTIGE POWER BLENDER - 9
OPERATION
CLEANING / CARE
Use these steps to get started right away.
1. Attach the power cord to the Motor Base and then
plug it into the outlet. Turn on the Master Switch button
above the cord connection at the rear of the Motor Base.
2. Place ingredients to be processed inside the jar.
3. Attach the lid to the jar; ensure that it is installed on
the jar completely.
4. Place the blender jar onto the motor base making sure
the jar is secure and fully seated.
5. Press the Button where the power icon is located on
the control panel.
6. Rotate the Control Knob to the le for the Pulse
feature or to the right for Manual Speed control.
7. When you have completed your blend cycle, rotate the
Control Knob back to the center Stop position. You may
now remove the blender jar from the motor base. Never
1. Unplug the blender from the electrical socket.
2. Do not use sti bristled brushes or abrasive cleansers
to clean the motor base or jar assembly as this can dull or
scratch the surface.
3. NEVER submerge the blender motor in water.
4. Aer cleaning, dry with a cloth or paper towel and we
recommend the blender jar be stored upright.
5. Clean the base by rst unplugging the power cord
from the back and then simply wiping the base and
control panel with a damp cloth.
6. The appliance is easier to clean the Royal Prestige
Power Blender if you do so immediately aer use.
remove the jar from the base while motor is on.
8. You can also stop the blending cycle at any time
by pressing the Center Button where the power icon is
located.
9. For best results when blending dry foods, we
recommend lling the blender jar no more than half.
10. For best results, clean the blender jar immediately
aer blending.
11. For best performance, wipe the top of the jar and
spout area immediately aer each pour. Do not allow food
to remain on the outside of the jar for an extended period
of time.
7. For a deep cleaning follow the instructions below:
• Disassemble the Lid by removing the Lid Cap
and Silicone Gasket.
• The blender Jar and Lid assembly can be
washed with warm soapy water.
• When washing the blender by hand, use warm
water.
