ROYLITE 5R User manual

1
5R / 7R BEAM MOVING HEAD
User Manual
This product manual contains important information about the safe installation and use of this projector.

2
Please read and follow these instructions carefully and keep this manual in a safe place for future reference.
STATEMENT
The product is good packing when ship out the factory. All users should strictly abide
by the warnings and instructions stated in this manual, any damage and results due to
misuse and the neglect of this operating manual will be excluded from the deal
responsibility this manual will not informed in additionally if have technical changes.
DISPLAY PRODUCTION DESCRIPTION
Thank you for choose this B230 products, this model is the moving head light
which is the latest development of the smart, efficient products, beautiful shape,
smooth R & D, combined with the advanced technology of today's stage lighting
products with international advanced electronic control technology and excellent
user-friendly industrial design , fully comply with CE standard,accepted international
standard DMX512 signal mode.
This moving head lights, use ceramic luminescent film reflector as a condenser system,
coupled with the high-quality optical lens components, broadband voltage, a clear pattern,
sharp and uniform output light efficiency. the English language selection mode, intuitive
operating menu, shortcut.
B230, has 16/20 international standard DMX512 channels optional Horizontal scan: 540 °
vertical scanning 270 ° (16bit precision scanning)electronic correction, LCD color+
single-Key flying shuttle can spin. It can be inverted 180 °, the color wheel is combined
with white and 14 colors. The gobo wheel: 17 patterns + white effect round by eight prism
and atomization function. 0-100% mechanical dimmer, support mechanical strobe
and variable strobe effect, strobe macro function.
The optical system of the lens group electric focusing, the beam angle of 0 to 4 °with
overheating protection function Moving head lights are widely used in television, disco,
dance halls, nightclubs,large-scale performances and other professional venues.
1. PRODUCT
1.1 BEAM PACKING
Size：395（L）×287（W）×495（H）mm
Net Weight：17.5KG

3
Gross Weight:21.5KG
2. SAFETY INFORMATION
Safety warning message
This product is only suitable for professional use, and does not apply to security for other purposes.
After you got the lights, please check the package whether have any damage
caused by transportation. If there is any damage, do not use this fixture, and
please contact the dealer or manufacturer as soon as possible.
This product is only suitable for indoor, IP20 protection class. Lamps should
be kept dry to avoid Moisture, overheating or dusty environment. Prevent
lamps come into contact with water or any other liquid.
The use of this product should pay attention to: fire, heat, electric shock,
ultraviolet radiation, the lamp to explode or
Shedding caused serious or fatal injury.
Need to read the instructions before use energized or installing.
Follow through the operation of security methods and pay attention to the
warning signs on the specification and equipment. If you have any problem for
how to safely operate the equipment. Please contact your dealer.
2.1 ANTI-HIGH TEMPERATURE
Ta =40℃
Please don’t use the equipment if the temperature above 40℃
2.2 BURST PREVENTION
The lens should be changed if had damaged or any problems. Don’t
change the non-original manufacturer lens.
Len size：￠1136×60 mm
2.3 TO PREVENT FALLING WOUNDING
Please don’t move the package by one person only.
When Hang the fixture, please must verify that the facilities to be
able to withstand the weight of the lamps at least 10 times more.
Please make sure the Mounting hardware is strong enough no any
damage, and insurance for the safety rope as auxiliary security fixed

4
in other facilities will need to verify before installation. Installing or
removing the equipment, to make the pulley below the work location
2.4 UA PROTECTION AND THE BULB EXPLOSION
Prohibit straight viewpoint with exposed bulbs to avoid UV damage
to the eyes;
Do not use the equipment without the lens screen and the lid;
The lens and the light head covers should be timely replaced if any
damage to rupture;
The Fixture should be used with the protection screen together.
2.5 PREVENTION OF ELECTIC SHOCK
The electrical connection must only be carried out with corresponding
qualifications;
Before installing, make sure you use the power voltage lamps must comply
with the identified power, voltage and have an overload or leakage protection;
Each lamp must be properly grounded, installed in accordance with the
relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Prohibit the use of a lightning storm or wet environment.
2.6 TO PREVENT BURNING OR FIRE
1. The fixture can be mounted directly on the surface of ordinary
combustible material.
2. Do not short-circuit temperature protection switch or fuse, use the
specified type of fuse.
3. The equipment must be installed away from inflammable and explosive materials.
4. The equipment should be projected range of 3 meters away objects and
projectiles temperature less than 60 ° C; ---- 3.0 m.
5. Fan or ventilation, at least in the range of 0.5 meters can not be an
obstacle.
6. Do not place any object on the lens.
7. Handling at least allow the device to cool for 20 minutes.

5
8. Do not replace the non-original parts.
3. PACKAGE
3.1 ATTACHMENT
Beam230 packed with fly-case of one in one ,two in one ,or carton box.
ACCESSORY
CONTENT
QUANTITY
USER MANUL
1
CLAMP BRACKET
2
SIGNAL CABLE
1
PACAKGE SIZE
CARTON BOX
46x44x57cm
Flight-Case 2 in 1
83x47x71cm
3.2 TRANSPORT PROTECT LOCK
In order to protect the light, there is a protect lock; During the transport , the
lock will closed keeping the item in safety state.
3.3 ABOUT PACK STAGE
1. Before packed, make sure power is off, and wait for at least 20mins for
cooling down.
2. Before clean the fixture, make sure X, Y axis protect lock closed.
3. After packed by plastic bag, high-lift the fixture with two handles
besides the product. put the product into the fly-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock the
fly-case.
5. Fly-case only up stacked two layers. Prohibited upside down
6. When packed with carton box, equipment should be put into the foam
first, then set into a carton, pay attention to the vertical position.
3.4 UNPACKING
Note: Before unpacking check the damage is whether due to the transportation or
not, if you find any such damage, please do not use this item, and contact with the
dealer or manufacturer as soon as possible.

6
1. Open the fly-case, and discover the inside plastic bag.
2. High-lift the product by two handles beside the bottom base and move it out.
3. Before power on, make sure you have opened the X, Y axis lock!
4. INSTALL STRANDARD
4.1 INSTALL LOCK
B230 can be placed on the stage, or mounted in an arbitrary direction of the
truss. Two fast locks system could fix the item easily
4.2 EQUIPMENT FIXED
1.Before installation must verify the fast lock is keep in good state,
and can withstand at least 10 times the weight of product. Verify that
the building can withstand at least 10 times of the total weight of the
product and accessory equipment.
2. Fix the hang fixture into the hole, which located on the base of the price.
Seize handle of fasteners, clockwise rotate 1/4 turn and lock.
Installed other one fastener in the same method.
3. Using the safety cable which can withstand 10 times the weight of
the equipment.
4. Make sure the X,Y protect locks are opened, Verify that within 3
meters there is no combustibles .
WARNING
Fixture must use two fixing devices, and make sure the fixing device
have locked! And only fully clockwise rotate 90 ° can lock the hang
fixture! Do remember plus a safety rope, and do not connect the safety
Rope to plastic handle. It should be connect to the hole on the base!
4.3 FIXTURE CONNECT
Attention! One product only can accept one input one output.
B230 DMX cable include 3 contact pins:
Pin 1, FOR GROUND; Pin 2 connected to the negative polarity
signal; The pin 3connected to the positive polarity signal.
DMX512 cable must use the professional shielded twisted pair
cable; standard loudspeaker cable is not reliable to control the
long-range data. 24AWG cable is suitable for more than 300
meters long-distance signal transmission and must add\ DMX 512
signal amplifier.

7
Do not use two outputs to separate the connection, if separate a
continuous connection to branch, DMX512 splitter is necessary.
Attention! Do not overload the connection. One continuous
connection can only connect up to 32 devices.
If use the DMX512 splitter. At first connect DMX512
Splitter input terminal to controller .And then connected from
the splitter output terminal to next device.
Do as above guide to connect other device, and finally coupled with
terminal insertion.
5. ALTERNATING CURRENT POWER SUPPLY
5.1 VOLTAGE, POWER, FUSE SPECIFICATION
Input Voltage
Total Power
Frequency
110-240V
400W
50/60Hz
5.2 POWER PROTECT
The equipment must be operated by professionals; Make sure that the voltage of
power supply must be comply with the voltage identified on the lamp, and must
have an overload or leakage electrical protection.
ATTENTION!
Factory has equipped the standard 3 pin plug socket. Connect
the power supply as below table.
If lamp cable is damaged, replacement should be operate by
factory or qualified staff. Any question, please contact
professionals or talk to a qualified electrician.
Live wire(L)
Null(N)
Ground wire
RED
BLUE
Yellow+Green
Fuse voltage
Fuse voltage
Specification
250V
6A
5×20

8
WARNING!
There is a safety hazard or damage if install similar bulb
To reduce the risk of damage to light,do change the lamp
before using time over 125% of lamp life.
6.2 LAMP REPLACE
Attention! When replace the lamp is forbidden to touch lamp with bare hand, to
avoid the greasy dirt stains filament.Filament must be kept clean.
1. Disconnect the power. Before replace lamp, fixture need 20 minutes for lamp
cooling. Fasten the head with Y axis protect lock in 60 ° position.
2. Use cross screwdriver to open the light body cover, remove the fan bracket, pull
out the bulb cable
3. Open stainless steel tablet holder with one hand and the use other hand to pull out
the bulb at oblique 15 °
4. Install the lamp
6. CONTROL PANEL(DISPLAY)
LCD Touch Display
Rotating Button

9
7.1 LCD Operation Menu
Level 1
Level 2
Press
Enter
Level 3
Press Enter
DMX
ADDR:001
Address 001
001-512
Display
Show Reve◄
►
Nature/Reverse
Language ◄
►
Chinese/English
Brig setting◄
►
000-007
Backligh ◄
(Backlit delay)
►
1Min/5Min/8Min/
Light
Menu back◄
►
1Min/5Min/8Min/
Off
Backlit Flash ◄
►
Open/Off
Return ◄
►
Feature
XY set up ◄
►
Short cup ◄
(shortest Route)
►
Open/Off
Full color ◄
►
Off/open
Chan Mode ◄
►
Smal/Defe/Stan
Rece Mode ◄
►
DMX/Auto/Wire
Run Mode ◄
►
Slve/Auto/Musc(S
ound)
Signal Clear ◄
►
Open/Off
DMX Reset ◄
►
Open/Off
Return ◄
►
Lamp Sett
Default ◄
►
Open/Off
Control ◄
►
Open/Off
DMX Lamp ◄
(DMX lighting)
►
Open/Off
Lamp Time
Clear Time
Lamp State ◄
►
Ilum(cancel)
Return ◄
►
Info See
(Information search)
Work Hours
Work Times

10
Fan1 Rotation
Fan2 Rotation
Version
DG01
Spare Time
Most
Spare cut
Most
Return
►
Control ( DMX control)
CH01 ◄
►
000-255
CH02 ◄
►
000-255
…
…
CH40 ◄
►
000-255
Assion Tool
Factory ◄
Defaults ◄
Redress ◄
Ch Define ◄
Brightness ◄
Check Sum ◄
Return ◄
Chan Leve
◄
Reset Light
◄
►
Annu(cancel)
Exit Menu
◄
Note:
There is only one Projector to be set as a Master in a signal Cable. If Master’s functions used,
Please disable DMX control signal.
When multiple projectors’ work together in synchronous control state, Parameters can be
transmitted from the master projector to the slave projectors such as DMX channel mode,
Display setting status and operation mode (User memory data is included).
Before parameters transmitted, the projector which will send parameters should be set as a Master
and others be as Slaves.

11
8.DMX PROTOCOL
16Channel
20 Channel
DMX Value
Description
1CH Color
1CH Color
0-4
white
5-8
White +color1
9-12
Color1
13-17
Color1+Color2
18-21
Color2+Color3
22-25
Color3
35-38
Color4
39-42
Color4+Color5
43-46
Color5
47-51
Color5+Color6
52-55
Color6
56-59
Color6+Color7
60-63
Color7
64-68
Color7+Color8
69-72
Color8
73-76
Color8+Color9
77-81
Color9
82-85
Color9+Color10
86-89
Color10
90-93
Color10+Color11
94-98
Color11
99-102
Color11+Color12
103-106
Color12
107-110
Color12+Color13
111-115
Color13
116-119
Color13+Color14
120-123
Color14
124-127
Color14+Color15
128-255
Color15
2CH Strobe
2CH Strobe
0-3
white
4-103
Strobe effect from slow to fast
104-107
white

12
108-207
Strobe effect from slow to fast
208-212
White
213-225
Random strobe effect,slow
226-238
Random strobe effect,middle
239-251
Random strobe effect,fast
252-255
white
3CH
Dimmer
3CH Dimmer
0-255
Linear dimming from 0% to 100%
4CH Gobo
wheel
4CH Gobo
wheel
0-3
Blank
4-7
Gobo 1
8-11
Gobo 2
12-15
Gobo 3
16-19
Gobo 4
20-23
Gobo 5
24-27
Gobo 6
28-31
Gobo 7
32-35
Gobo 8
36-39
Gobo 9
40-43
Gobo 10
44-47
Gobo 11
48-51
Gobo 12
52-55
Gobo 13
56-59
Gobo 14
60-63
Gobo 15
64-67
Gobo 16
68-71
Gobo 17
72-113
Backward gobo rotation from fast to
slow
114-117
Open
118-159
Forward gobo rotation from slow to fast
160-166
Shake from slow to fast : Gobo 1
167-172
Shake from slow to fast : Gobo 2
173-179
Shake from slow to fast : Gobo 3
180-185
Shake from slow to fast : Gobo 4
186-191
Shake from slow to fast : Gobo 5
192-198
Shake from slow to fast : Gobo 6
199-204
Shake from slow to fast : Gobo 7
205-211
Shake from slow to fast : Gobo 8
212-217
Shake from slow to fast : Gobo 9
218-223
Shake from slow to fast : Gobo 10

13
224-230
Shake from slow to fast : Gobo 11
231-236
Shake from slow to fast : Gobo 12
237-243
Shake from slow to fast : Gobo 13
244-249
Shake from slow to fast : Gobo 14
250-255
Shake from slow to fast : Gobo 15
5CH Prism
5CH Prism
0-127
White
128-255
Prism
6CH Prism
Rotating
6CH Prism
Rotating
0-127
Prism Fine
128-189
Backward rotate from fast to slow
190-255
Forward rotate from slow to fast
7CH Macro
7CH Macro
0-255
Macro
8 CH Frost
8 CH Frost
0-127
white
128-255
Frost effect
9CH Focus
9CH Focus
0-255
Linear Focus
10CH Pan
10CH Pan
0-255
0-540°
11CH Pan
Fine
11CH Pan Fine
0-255
Pan Fine
12CH Tilt
12CH Tilt
0-255
0-270°
13CH Tilt
Fine
13CH Tilt Fine
0-255
Tilt Fine
14CH XY
Speed
14CH XY
Speed
0-255
linearity control/Blank
15CH Reset
15CH Reset
128
Reset All
16CH
Lamp
Control
16CH Lamp
Control
63
Lamp off by Controller
178
Lamp on by Controller
17CH XY
Speed
0-255
linearity control
18CH color
speed adjust
0-255
linearity control
19CH Focus
speed adjust
0-255
linearity control
20CH Gobo
speed adjust
0-255
linearity control