RS PRO 808-7042 User manual
Instruction Manual ENGLISH
Description Long reach LED Magnifier Lamp, with 5D lens
Voltages Available 220V & 240 V , 50 Hz
Magnifier 125 mm (5") diameter lens - Removable
Magnification Fitted 3 dioptre lens;1.75x mag. & includes 5 dioptre
lens;2.25x mag.
Sun Protector Cap Yes
Light type 56 piece SMD LED, 9W
Cable length 1.6m
Table clamp/base Table Clamp
RS Pro LED Bench Magnifier, 3 dioptre, 5 dioptre, Table Clamp
Mount, 8W
HOW TO USE
1. Securely fasten the table clamp included to a solid horizontal surface with thicknesses between
12.5 - 62.5mm (0.5 - 2.5"). Ideal for household tables, study desks and work benches
2. Insert the stem of the lamp into the clamp hole
3. Insert the 220v or 240v plug into a conveniently located electrical socket
4. Switch the lamp on by using the on/off switch located on top of the head. The lamp is now ready
to use.
5. Adjust your lamp head position to suit your need and tighten the locking nuts as required
REMOVING THE LENS
You may wish to remove the lens for cleaning purposes or to replace with the 5 dioptre / 2.25x
magnification lens
1. Please switch the lamp off and remove the plug form the mains socket
2. Turn the plastic lens retainer anti-clockwise and carefully remove the lens
3. Replace lens and turn the plastic lens retainer clockwise to fix securely into position
IMPORTANT! - SAFETY INSTRUCTIONS
WARNING: When using electrical products, important safety precautions must be adhered to in
order to reduce the risk of fire, electric shock and personal injury.
PLEASE READ THE FOLLOWING CAREFULLY:
1.Indoor use only: a. Room temperature from -20 to +40 degrees centigrade b. Humidity: Less
than or equal to 95%
2. Do not expose the lamp to:
a. High temperatures
b. Water, steam or damp conditions c. Corrosive, flammable liquids, or gaseous / explosive
atmospheres 3. Do not abuse the cord. Never carry the lamp by the cord or pull the cord to
disconnect the lamp. Keep the cord away from heat, oil or sharp objects
4. Disconnect your lamp when not in use.
5. Never attempt to disassemble or repair the lamp, unless you are a qualified electrician
6. CAUTION: Never leave the magnifier lens unattended in direct sunlight or where light can shine
through it - This constitutes and fire hazard!
CE Declaration of Conformity
We declare that this product complies with the Electromagnetic Compatibility
Directive and the Low Voltage Directive
RS COMPONENTS UK
PO BOX 99 CORBY
NORTHANTS,
NN17 9RS United Kingdom
Tel: +44 (0)8457 201201
Fax: +44 (0)845 8509911
WEB: rswww.com RoHS Compliant
